Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Whitney
If your gate has gone stiff, noisy, or stubborn, you’re in the right place. We handle gate parts and welding across Whitney, from hinge and post replacement to custom welding on gates the builder hung decades ago. We know this side of the valley well, including the newer subdivisions off Lake Mead Blvd and Boulder Hwy in the 89122 ZIP, where the housing stock is mostly 1990s and 2000s stucco tract homes now reaching the end of the line on hinges and latches. Local knowledge matters: a gate that fails here fails for reasons a wetter city never sees. Call (888) 276-7609 for a free estimate.
Why Ironworks Gate Co. Boulder City Is Whitney’s Preferred Gate Parts & Welding Company
Whitney homeowners tend to have lived in their homes a long time, plan to stay, and want the job done once. That’s exactly the customer we’re built for. Our gate parts and welding work comes with the same written 90-Day Done Right Promise we put behind every job, so if something isn’t right, we come back and make it right. No arguing, no paperwork.
Every call is answered by a live person, day or night, and our technicians have up to 13 years of experience with the hardware that keeps a gate swinging true. When we come out to a Whitney address, we show up when we say we will, give you the price upfront before a single bolt is turned, and stand behind the work. That last part matters more than any sales pitch: the company that makes a 40-year-old gate close like the day it was hung is the one you call again.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Whitney
We focus on the parts that actually fail on Whitney gates, not on selling you a new gate you don’t need. Here are the four jobs we do most.
Hinge Replacement
A gate that sags and drags usually needs new hinges before it needs anything else. In Whitney’s heat, grease bakes off the pins and the barrels wallow until the gate hangs crooked. We replace the hinges with hardware built to survive 100°F+ summers, then adjust the swing so it closes on its own again.

Post Replacement
When the hinge post itself is failing, new hinges alone won’t fix the sag. That’s common in Whitney tract homes where the original footing was set shallow for a builder-grade gate. We pull the old post, set a proper footing, and reset the gate square. Repairing the gate without correcting the post just fails twice.

Rail Repair
Bent, dented, or cracked rails are a routine fix for us. The fine dust that blows off the open desert packs into moving parts and racks up wear, and one hard season can bow a rail out of line. We straighten or replace damaged rails and re-weld the joints so the frame stays rigid.

Custom Welding
Sometimes the right answer is to weld a gate back to health rather than replace it. We weld broken hinges, patch cracked frames, and fabricate small parts that are hard to source for older or unusual gates. If your gate was installed manual by the builder decades ago, welding is often the cheapest path to another twenty years. See our full Gate Parts & Welding services for the rest of what we handle.
Trusted Brands We Service in Whitney
Whatever automation or hardware is bolted to your gate, we’re equipped to work on it. We service LiftMaster, Mighty Mule, FAAC, and BFT, along with the other major brands that turn up on Whitney driveways. We’re trained across nine automation brands, so the correct fix happens on the first visit rather than the third. We don’t stock parts locally, which means we bring the right ones rather than improvising with what’s on hand. Most parts and welding jobs are done in a single visit. If a special-sized part is needed, we’ll tell you straight how long it takes.
Common Gate Parts & Welding Problems We See in Whitney Homes
- Builder-grade gates retrofitted with an operator and no power run. Many Whitney tract gates shipped manual, so adding automation later means running conduit that was never trenched during the build. Without that run, installs stall or fall back on extension cords and solar workarounds that never quite work right.
- Dust-packed rollers, hinges, and rack and pinion teeth. The fine desert dust that settles into exposed hardware packs into every moving part, and the 100°F+ heat bakes off the lubricant that would otherwise flush it out. Slide and swing gates bind and wear out years sooner than they should.
- Sagging gates traced to a failing hinge post. Most sags start at the post, not the panel; the footing was set shallow and the ground has shifted. New hinges on a bad post just buy you a season or two before the sag returns.
- Spring and summer dust storms abrading exposed metal. Whitney’s windswept terrain fills tracks and grinds moving parts, so gates seize or misalign well before their time. A gate that was smooth in March can be dragging by July.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Whitney, NV
Here’s what gate parts and welding work actually runs in the Whitney market. Prices are quoted and agreed before any work starts, so there’s no bill bigger than the number we gave you.
| Service | Typical Range in Whitney |
|---|---|
| Hinge replacement (per hinge, installed) | $75 – $150 |
| Post replacement with new footing | $250 – $450 |
| Rail repair and re-weld | $180 – $400 |
| Custom welding (per job) | $150 – $500 |
| Gate rollers (per roller, installed) | $60 – $130 |
| Latch and lock replacement | $100 – $250 |
A typical hinge replacement in Whitney runs $75 – $150, and a full post replacement with footing runs $250 – $450. What moves the number: the size and weight of the gate, whether the hardware is welded on or bolted, and whether the footing needs to be reset. Estimates are free, and we’ll always tell you when a repair beats a replacement. Call (888) 276-7609 to lock in a price.
We Also Serve Cities Near Whitney
We work across the east valley, so if you’re just outside Whitney we can still help. That includes Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re not sure we cover your street, call and we’ll tell you straight. For a quick look at the areas we serve, see Gate Parts & Welding in Whitney.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Whitney
It means running power and conduit that were never trenched during the build, then installing a gate operator with the required UL 325 entrapment protection (safety photocells or edge sensors) and a loop detector or keypad entry wired back to a real power source. The order matters: we correct the post footing and sag first, then mount the operator. Doing it the other way around just puts a working operator on a gate that still drags. Call (888) 276-7609 for a free evaluation.
Because of the dust. The fine desert grit that blows off the open terrain here settles into exposed hardware and packs into the rollers, and 100°F+ heat bakes off the lubricant that would otherwise flush it out. In Whitney’s newer subdivisions off Lake Mead Blvd and Boulder Hwy, we routinely replace rollers every 3 – 4 years, a cycle that simply doesn’t happen in wetter climates. Call us for a quote.
Usually just new hinges, but only if the hinge post is sound. Most sags we look at in Whitney come from a failing hinge post and a shallow footing, not from the gate panel. New hinges on a bad post buy you a season before the sag returns, so we check the post first. Call (888) 276-7609 for an honest call.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever is on your driveway we can work on it. Solar units like Mighty Mule and heavier swing setups on LiftMaster and FAAC are both common here. Call for an exact quote on your brand.
It can be, but only as a stopgap, not a first choice. Solar gate openers work, but Whitney’s intense sun and dust make them a maintenance-heavy option, and they still can’t push a gate whose footing was set shallow. When a power run is feasible, a hardwired operator lasts longer and gives you real entrapment protection. Call (888) 276-7609 and we’ll walk you through the options.
Getting Your Whitney Gate Fixed Right
Gate parts and welding problems in Whitney don’t get better on their own. A gate dragging on dust-packed rollers or sagging off a failing post gets worse every season, and a builder-grade manual gate that needs an operator will keep stalling until the power and conduit run is done properly. We handle the whole scope: hinges, posts, rails, custom welding, rollers, and latches, with the written 90-Day Done Right Promise behind every job and upfront pricing settled before a bolt is turned. Our technicians have up to 13 years of experience, and a live person answers the phone any hour. Call (888) 276-7609 for a free estimate and a square deal.
Written by the team at Ironworks Gate Co.