Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Whitney
If you live in Whitney and your builder-grade gate is sagging, sticking, or still being pushed open by hand, we can help. Ironworks Gate Co. installs and automates driveway, sliding, swing, and pedestrian gates throughout Whitney, including the newer tracts along the 89011/89122 corridor off Lake Mead Blvd and Boulder Hwy. We know this desert ground and the fine dust that settles into every exposed roller and hinge. Call (888) 276-7609 for a free written estimate, and we’ll schedule a time that works for you.
Why Whitney Homeowners Call Ironworks Gate Co.
Whitney is a community of stucco tract homes built mostly in the 1990s and 2000s, and many of those gates are now reaching the end of their working life for hinges, latches, and rollers. We’ve built a strong local reputation by treating every Whitney job the same way: an upfront price settled before we turn a bolt, then work done right the first time.
Our technicians have up to 13 years of experience, and they arrive background-checked and uniformed. Every completed job is protected by our written 90-Day Done Right Promise – if something isn’t right, we come back and make it right, no arguing. We also stand behind it with standing offers Whitney homeowners use: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Senior and veteran households get 5% off, always.
We answer the phone live, 24 hours a day, seven days a week. No voicemail tree, no callback queue. When you call about a gate in Whitney, a person picks up and helps you plan the next step.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Whitney
We specialize in the whole job, from welding a new frame to wiring the operator and setting the safety edges. Here’s what we install most often in Whitney.
Driveway Gate Installation
A driveway gate is the biggest installation most Whitney homeowners will ever order, and the post footing is where it lives or dies. In these newer subdivisions, we often find a footing sized for a hand-pushed panel that was later fitted with an operator. That added torque, plus desert dust, is a recipe for sag. We set the footing to handle the gate and the motor from the start.

Sliding Gate Installation
Sliding gates suit Whitney driveways that lack the swing clearance for a double gate. The track and rollers take the worst of the dust here, so we spec heavy-duty rollers and set the rack and pinion so the gate travels true. If your property line runs tight to the street off Boulder Hwy, a slider is often the cleaner fit.

Swing Gate Installation
A swing gate works well on wider Whitney lots where the panel has room to open inward. We hang the gate square, set the hinges for the load, and dial in the arm travel so it doesn’t fight the stop. For homes near the open desert edge of 89122, we also plan for wind load, because a broad swing panel catches a lot of it.

Pedestrian Gate Installation
A walk-through gate lets you skip opening the driveway for the mail or a visitor. We match the pedestrian gate to the driveway style so the whole entry reads as one piece, and we can add a keypad or latch for security. Solid hardware matters here; a lightweight latch won’t survive a Whitney summer.
Trusted Brands We Service in Whitney
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range means we can work with whatever operator is already on your driveway or recommend one that fits your gate and your budget. We don’t stock parts locally, so we order what your job needs and schedule the installation around the delivery. Most jobs are completed in a single visit once the parts are on hand, and the price is agreed in writing before we start.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Whitney Homes
The failures here follow a pattern, and it’s tied to how these homes were built and what the desert does to hardware.
- Manual gates that were automated later. A builder hung a wrought-iron or vinyl gate for hand pushing, then an operator went on without upgrading the post footing. The added torque and the dust combine to wear rollers and pull the gate out of alignment within a few seasons.
- No buried conduit for power or control wiring. Many Whitney gates never got a proper power drop to the hinge post. Exposed runs heat-fatigue in 100°F+ summers and choke on dust, so the fix usually means trenching conduit for line power and the low-voltage safety circuit.
- Dust-packed rollers and tracks. Fine desert dust grinds into exposed hardware instead of washing away the way it does in wetter cities. In the newer subdivisions off Lake Mead Blvd, we routinely see rollers replaced every 3 to 4 years – a cycle you just don’t get where it rains.
- Missing entrapment protection. An operator added without safety photo-eyes or edges is a hazard, not just a code problem. We set entrapment protection per UL 325 on every automated gate we install.
A typical Whitney installation starts with one of those builder-grade gates. A qualified local pro re-levels or replaces the post footing, runs conduit for line power and the safety photocells, and sets entrapment protection before dialing in the rack and pinion or arm travel. That’s the sequence that makes a gate last here.
Pricing for Gate Installation in Whitney, NV
Pricing here reflects the extra work Whitney gates tend to need: footing upgrades, conduit runs, and dust-rated hardware. A typical pedestrian gate installation in Whitney runs $900 to $2,200. A single swing or driveway gate with an operator installed runs $2,800 to $6,500. A sliding gate with automation and a power run runs $4,500 to $9,000. Those ranges move with gate width, material, whether a new footing or conduit is needed, and which operator you choose. Adding keypad entry or a loop detector adds to the total. Whatever the job, the price is quoted and agreed before any work starts, so there are no surprises on the bill. Estimates are free. Call (888) 276-7609 for an exact number.
We Also Serve Cities Near Whitney
Whitney sits close to several communities we serve, so a call from just up the road is easy to fit in. Along with Gate Installation in Whitney, we take on work in Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re near the Whitney line and not sure whether you’re in our area, call and we’ll tell you straight. Our Gate Installation team handles the full scope, from a single pedestrian gate to a full automated driveway system.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Whitney
In most cases you can automate the existing gate; you rarely need a brand-new one. The catch is the footing and the power. If the post was sized for hand pushing, we check whether it can carry the operator torque, and we run conduit for line power and control wiring. From there we set the operator and the safety edges, and the gate does the rest. Call (888) 276-7609 for a free estimate and we’ll tell you what your gate needs.
Fine desert dust is the reason. In the 89122 area, grit settles into exposed rollers and slide-gate tracks and grinds instead of washing away, so hardware wears on a 3 to 4 year cycle. In wetter metros the same rollers last a decade or more. Heavier, dust-rated rollers and a regular tune-up stretch that life. Call us to schedule an $89 seasonal tune-up.
Yes. Any automatic gate with entrapment risk needs safety photo-eyes or edges set per UL 325, and we install them on every automated gate. Skipping them is a real hazard for kids, pets, and vehicles, not just a code issue. We set the protection before we hand over the gate. Call (888) 276-7609 to talk through your setup.
Yes, in most cases we can add a keypad, a vehicle loop detector, or both to an existing sliding gate. The loop detector opens the gate as a car pulls up; the keypad lets family and guests in with a code. Both need a working control circuit and a place to land the wiring, which we confirm on a free second opinion. Call us and we’ll price it.
A swing gate opens inward and needs clearance behind it; a slide gate travels sideways along a track and needs room beside the driveway. Whitney driveways with tight street frontage usually favor a slider, while wider lots can take a swing gate. Wind load also matters on the open desert edge, where a broad swing panel catches more of it. Call (888) 276-7609 for an exact recommendation.
Ready to get your Whitney gate installed right and backed in writing? Call (888) 276-7609 for a free estimate. We’ll give you a straight price upfront, agree it before any work starts, and stand behind the job with our 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co.