Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Sunrise Manor
If your gate is dragging, sticking, or stuck open on a lot off Charleston or Nellis, we can help. Ironworks Gate Co. handles gate parts and welding for Sunrise Manor homeowners, and we know the older gates out here the way we know the neighborhood itself: wrought iron and chain-link hung decades ago, hinge posts set in caliche-hard soil, operators that predate modern safety rules. When you call, a live person answers, day or night. Most repairs are finished on the first visit, and the price is settled before a single bolt turns. Call (888) 276-7609.
Why Ironworks Gate Co. Boulder City Is Sunrise Manor’s Preferred Gate Parts & Welding Company
Sunrise Manor homeowners tend to call when the gate finally stops, and they want it fixed once. That’s the job we do. Our technicians have up to 13 years of experience, are background-checked and uniformed, and work on your property the way they’d work on their own. We’re trained and equipped on nine gate-automation brands, so the correct diagnosis happens on the first visit instead of the third.
On the east side of Sunrise Manor, where the open desert and unpaved lots feed grit into every moving part, a gate that seizes from packed sand gets misread as a dead motor by services that don’t work here. We know better. We flush and re-lubricate the hardware, check the hinge posts and rollers, and only after that do we look at the operator.
Every job is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No arguing, no paperwork. That’s the standard we hold on every call in Sunrise Manor.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Sunrise Manor
Which repair your gate needs usually comes down to what failed first. On most of the older gates around 89110, the hardware fails before the panel does. Here’s where we start.
Hinge Replacement
A sagging gate almost always points to a worn hinge or a hinge post that has shifted, not a bent panel. We replace hinges on wrought-iron and chain-link swing gates and reset them so the gate swings true again. In Sunrise Manor, grit-packed hinges are common, and replacing them costs less than living with a gate that scrapes every time it moves.

Post Replacement
Hinge posts set decades ago in caliche-hard soil lean and shift, and that drags the whole panel. We replace posts and reset the footing so the gate lines up and the operator isn’t fighting the sag. A typical post replacement in Sunrise Manor runs $450-$1,200 depending on post type and footing depth. On slide gates, posts that sat through monsoon runoff often need the footing reset, not just new hardware.

Rail Repair
Rails bend, rust through at the welds, and pull loose from the frame. We repair rails on wrought-iron and chain-link gates and re-weld the joints that have worked loose. A warped rail on a heavy gate can throw off the operator’s travel, so fixing the metal first saves a service call later.

Custom Welding
Sometimes the smart fix is custom fabrication: a replacement section welded to match an older gate, a new bracket for a hinge post that won’t take standard hardware, a reinforcement on a frame that’s been patched once too often. We weld on site when we can. For a full scope of what we handle, see our Gate Parts & Welding services.
Trusted Brands We Service in Sunrise Manor
We’re trained and equipped on nine gate-automation brands, including LiftMaster, Linear, DoorKing, and Mighty Mule, which covers most of the legacy operators we find on older Sunrise Manor properties. We don’t claim to stock every part locally; what we do is diagnose correctly so the right part gets ordered and the job gets finished. When a LiftMaster control board is obsolete, we’ll tell you plainly whether a retrofit exists or whether replacement is the cheaper answer. On some older Linear units, the fix is straightforward. On others, it isn’t, and you deserve to hear that straight.
Common Gate Parts & Welding Problems We See in Sunrise Manor Homes
This is the grit-and-soil story of the neighborhood, and it repeats on block after block.
- Hinge posts leaning in caliche-hard soil. Posts set decades ago shift or lean, and the panel drags. On a tired gate, that gets misdiagnosed as a motor fault when the metal was the problem all along.
- Rollers and hinges seizing from packed Mojave dust. This is the one we see most on the open desert edge and along unpaved lots. Fine grit packs into the rollers and hinges until they won’t turn, and the gate stalls out looking like the operator died.
- Legacy operators without working UL 325 entrapment protection. Pre-modern-safety control boards fail on gates hung long ago, and the gate can’t tell if something is in its path. Some can be retrofitted. Some can’t.
- Wood gates baked and warped by the desert heat. Months of dry, windy spring conditions and intense sun warp wood panels and jam metal in its tracks. Add a monsoon downpour that undermines a footing, and a gate that closed fine last summer stops mid-swing.
See the difference
Before
After
Before
After
Before
AfterWhich Sunrise Manor Legacy Gates Can Be Retrofitted, and Which Should Be Replaced?
Many older gates in Sunrise Manor can be brought up to modern safety, but not all of them are worth it. A hinge post reset, new rollers, and a modern operator with working photocells is a square deal on a sound frame. When the frame is cracked at multiple welds, the posts won’t hold a footing, and the operator has no path to UL 325 protection, replacement is usually the cheaper answer over the next few years. We’ll show you both numbers and let you decide. That’s the honest call, and it’s the one our Sunrise Manor customers get every time.
Pricing for Gate Parts & Welding in Sunrise Manor, NV
Here’s what the work runs in this market. A typical hinge replacement in Sunrise Manor is $180-$400 per gate. Post replacement runs $450-$1,200, depending on post type and footing. Rail repair and small weld jobs land between $150 and $500. Roller replacement is $60-$180. Latch and lock work is $90-$250. A custom weld job on an older gate usually runs $250-$900.
What moves the price: how much grit has packed into the moving parts, whether a hinge post needs resetting, and whether the operator is still serviceable or obsolete. You’ll get a written estimate before any work starts, and the price is settled before a bolt turns. The bill matches the quote. Estimates are free.
We Also Serve Cities Near Sunrise Manor
We work throughout the east valley, including Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just outside the 89110 line or on a nearby lot, call and we’ll tell you straight whether we can help. The same upfront pricing and written guarantee apply.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Sunrise Manor
It’s usually grit, not rust. Sunrise Manor’s open desert edge and unpaved lots feed fine Mojave dust into hinges and rollers, and it packs solid until the gate won’t move. The good news is that flushing and re-lubricating the hardware is often the whole fix. Call (888) 276-7609 for a free estimate.
Sometimes, yes, and sometimes replacement is cheaper. Many older LiftMaster and Linear operators can take modern photocells and updated control boards if the motor is still sound. When the unit has no path to working UL 325 entrapment protection, we’ll tell you so and price replacement against the retrofit. Call (888) 276-7609 for a free second opinion on any written estimate.
It’s almost always the post or the hinges, not the panel. On Sunrise Manor gates set in caliche-hard soil, the hinge post shifts or leans, and the panel drags with it. Resetting the footing and replacing the hinges usually corrects the sag without a new panel. Call (888) 276-7609 for exact pricing.
Because your lot catches more grit. Gates along the open desert edge and near unpaved lots take in sand the way a gate set back from the road doesn’t, and the rollers pack solid. It isn’t your motor, and it isn’t bad luck. Call (888) 276-7609 and we’ll flush, re-lubricate, and get it moving.
On a slide gate in Sunrise Manor, it’s the track more often than the motor. Wind-driven sand packs into the rack and pinion, and the operator trips on the resistance. We clean the rack and pinion before we ever call it a failed motor. Call (888) 276-7609 for an exact quote; estimates are free.
Whether your gate needs a hinge reset, a new post, or honest advice on retrofitting versus replacing, we’ll give you a straight answer and a price agreed before the work begins. Call (888) 276-7609 for a free estimate.
Written by the team at Ironworks Gate Co.