Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
If you live in Boulder City and your gate has stopped closing square, or a weld has let go at the hinge, we can help. Ironworks Gate Co. handles gate parts and welding here as a dedicated gate specialist, and welders who work in Boulder City regularly are the ones who understand what the desert heat does to wood and steel. Our technicians have up to 13 years of experience, and we quote the price before a single bolt is turned. Call (888) 276-7609 and a live person answers, day or night. We’ll be there when we say.
Why Ironworks Gate Co. Boulder City Is Boulder City’s Preferred Gate Parts & Welding Company
Boulder City gates are not like gates in Henderson or Las Vegas. The historic core is full of wood and metal panels hung decades ago, and the wrong repair shows from the street. We work on that reality, not a catalog assumption: matching profiles, fabricating what is no longer made, and respecting the historic overlay’s design review instead of forcing modern hardware into a 1930s bungalow opening.
Every job here is covered by our written 90-Day Done Right Promise. If something isn’t right after we leave, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard, and it applies to a hinge swap the same as a full post replacement.
We know Boulder City streets and neighborhoods, and we know how the long summers move a gate. Same-day and 24-7 emergency availability is there for gates stuck open or dragging on a driveway in the historic district. On installation and custom fabrication work we don’t promise same-day: those are measured, ordered, and scheduled, with a written price agreed beforehand. Either way, the call gets a real person.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City
Hinge Replacement in Boulder City
A 1930s bungalow gate with a hand-forged strap hinge will hang and drag after decades of 100°F-plus summers, and the latch stops lining up even though nothing was hit. We reset or replace the hinge, and on historic-core wood gates we fabricate a matching hinge rather than bolting on a modern strap that doesn’t fit the profile. That matters here because the historic overlay’s design review can require the original look.

Custom Welding in Boulder City
Hand-forged 1930s hinges and latches on historic-district gates failed for a reason: nobody makes them anymore. We weld, bend, and fabricate replacements on-site so the gate keeps its original character and passes design review. For the wrought-iron and block-wall subdivisions, custom welding also handles cracked rails, broken latches, and a frame that has started to spread.

Post Replacement in Boulder City
When a gate sags, the culprit is usually the post, not the panel. In Boulder City’s historic core, a loosened hinge post means resetting or replacing the footing so the gate hangs true again. We handle that work as part of the repair and finish with sag correction, so the gate swings and latches the way it did when it was first hung.

Rail Repair in Boulder City
The Mojave sun dries, splits, and warps wood rails faster here than almost anywhere. We repair or replace cracked rails, weld steel frames that have expanded and pulled away, and match the material instead of dropping in a modern substitute. It’s the difference between a repair that lasts and one that needs a return visit next spring.
Trusted Brands We Service in Boulder City
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, and Mighty Mule, which means we usually know the correct fix on the first visit whatever is on your driveway. We don’t claim to stock parts on a truck, and we won’t pretend we do; what we do promise is a straight answer on whether a part can be sourced, fabricated, or is time to replace the operator. Our Gate Parts & Welding team can tell you honestly which path is cheaper.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Boulder City Homes
Boulder City is a 1930s federal company town where the original Bureau of Reclamation housing, adobe, brick, and wood-frame bungalows built for Hoover Dam workers, still lines the historic core. That shapes what fails here. The problems below come up again and again:
- Hand-forged hinges and latches on historic-core wood gates. Off-the-shelf replacements don’t fit, so parts work often means on-site fabrication that has to pass the historic overlay’s design review.
- Steel frames rusting and expanding in Mojave UV while wood rails dry and warp. Hinges loosen against a swollen frame, and the gate sags at the hinge post instead of at the panel.
- Legacy operators in older subdivisions running obsolete control boards. Discontinued electronics fail without warning, and entrapment protection like safety photocells is often missing on older installs.
- Worn post footings behind sagging gates. After enough heat cycles the footing loosens, the post leans, and the whole gate drags even though the panel itself is sound.
Pricing for Gate Parts & Welding in Boulder City, NV
We price Boulder City work up front and agree the number before any work starts, so the bill matches the quote. Typical ranges for this market, subject to what we find on site:
- Hinge replacement: $150 – $350 per hinge, more on historic-core gates that need a fabricated match.
- Rail repair or re-weld: $180 – $450 depending on length and material.
- Post reset or replacement: $350 – $900, with footing work on the upper end.
- Custom welding and on-site fabrication: $250 – $750 for most household gate latches and hinge assemblies.
- $50 off any repair over $250, and a free second opinion on any written estimate you already have.
A worn post or an obsolete control board can push a repair past the cost of a new gate or operator, and we’ll tell you plainly when that’s the case. Estimates are free.
We Also Serve Cities Near Boulder City
Boulder City homeowners and the surrounding communities get the same gate parts and welding work from us, including Henderson, Whitney, Paradise, and Enterprise. If you’re just outside the historic district, we handle block-wall and wrought-iron perimeter gates there too. For Gate Parts & Welding in Boulder City and nearby areas, one call covers it.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City
Yes, but usually not with a catalog part. Those 1930s hand-forged hinges and latches are no longer made, so we fabricate matching replacements on-site and finish them to suit the historic overlay’s design review. Call (888) 276-7609 for a free estimate.
Most of the time it’s the post, not the panel. A loosened hinge post or worn footing lets the gate drop even when the wood and steel are sound, so we reset or replace the footing and correct the sag before touching anything else. Call (888) 276-7609 to book a look.
Often a retrofit is possible on LiftMaster and FAAC units still in good mechanical shape, but a discontinued board plus worn gears can make a new operator the cheaper answer over a few years. We’ll price both paths in writing so you can decide. Call (888) 276-7609 for a free estimate.
Yes. Boulder City sits in the Mojave with summer highs over 100°F and intense UV, so wood dries and warps fast and steel rusts and expands, which loosens hinges sooner than in cooler climates. Repair cycles here are driven by sun and heat, not moisture. Call (888) 276-7609 to get ahead of it.
If the operator is missing UL 325 entrapment protection like safety photocells, yes. Many older installs were put in before those requirements, and we bring them up to code when we repair the operator. Call (888) 276-7609 for a free estimate.
Whether it’s a hand-forged hinge on a historic Boulder City bungalow, a cracked rail on a block-wall gate, or a control board that finally gave out, we’ll give you a straight answer and a written price before we start. Call (888) 276-7609 for a free estimate. A live person answers every call, and we stand behind the work in writing.
Written by the team at Ironworks Gate Co.