A Ironworks company - serving Boulder City, NV
Gate Parts & Welding in Enterprise, NV | Ironworks Gate Co. Boulder City

Gate Parts & Welding in Enterprise - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Enterprise

If a gate on your Enterprise property is dragging, leaning, or stuck half-shut, we can help. Ironworks Gate Co. handles gate parts and welding across the 89139 corridor and the master-planned neighborhoods off the southern 215 Beltway, and we know how gates in this part of the valley are built and how they fail. Our technicians have up to 13 years of experience, every price is quoted and agreed before any work begins, and a live person answers the phone around the clock. Call (888) 276-7609 and we’ll get a trained technician out to look at your gate.

Call (888) 276-7609

Why Ironworks Gate Co. Boulder City Is Enterprise’s Preferred Gate Parts & Welding Company

Enterprise homeowners tend to stay put, and they remember the last contractor who let them down. That’s why most of our work here comes from neighbors passing our name along. When we quote a hinge replacement or a post re-anchor on your property, the number you agree to is the number on the bill, and the 90-Day Done Right Promise backs it in writing: if something isn’t right, we come back and make it right.

We’re trained and equipped on nine gate-automation brands, from LiftMaster to DoorKing, so the correct fix lands on the first visit whatever is bolted to your driveway. Technicians are background-checked and uniformed, and they treat your yard the way they’d treat their own mother’s. Response times to Enterprise are short because we’re working this side of the valley constantly, and there’s always a live person on the phone at (888) 276-7609, day or night.

Local knowledge matters most on newer gates. Enterprise is full of production homes where the original builder installed a lightweight decorative gate on a post footing that was never meant to take much load. We’ve learned to check that footing before we touch a hinge, because tightening hardware on a post that’s still moving just buys you a few months. For the full picture of what we do, see our Gate Parts & Welding service page.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Enterprise

Enterprise gates are mostly builder-installed wrought iron, aluminum, or vinyl, which shapes what actually needs fixing. Here are the four jobs we’re called out for most.

Post Replacement

This is the repair that matters most in Enterprise’s 89139 tracts. Because so much of the housing here went up with shallow, caliche-heavy backfill behind the block walls, builder-set gate posts lean and gates sag within a few years, well before you’d expect in older parts of the valley. A replacement post has to be dug, set, and matched to the subdivision’s HOA-approved iron or vinyl pattern exactly, so we check the association’s style list before we order a thing.

Post Replacement

Hinge Replacement

Extreme desert heat and the valley’s monsoon gusts work hinges loose and wear them out faster here than most homeowners expect. When we replace hinges in Enterprise, we check the post they’re bolted to before we swap the hardware, because a fresh hinge on a leaning post will just pull the same way again. We match the hinge to the gate’s weight and material so it lasts.

Hinge Replacement

Rail Repair

Vinyl rails bake and warp in the summer UV, and aluminum rails on production-home gates bend when the gate swings into a planter or a car. We repair or replace damaged rails and re-square the frame so the gate closes true. Where a section has cracked at a weld, we often repair it on site rather than replacing the whole panel.

Rail Repair

Custom Welding

Sometimes a builder’s standard gate just doesn’t hang right no matter how you adjust it, and the fix is a small weld-on modification: a bracket, a reinforcement, or a reworked corner. We weld wrought iron and steel on site, and we color-match the finish so it doesn’t look patched. Every weld is checked against the HOA pattern before we call the job done.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 276-7609

Trusted Brands We Service in Enterprise

We service the gate-automation brands most common on Enterprise driveways, including LiftMaster, Elite, and DoorKing. A word on parts: we don’t run a local parts stash. What we do is diagnose the operator on the first visit, source the correct part for that specific model, and schedule the repair, so you’re not paying for a guess or a second trip. Turnaround is fast because these brands are in our wheelhouse. If your gate carries a brand we haven’t listed, tell us on the phone and we’ll let you know before we come out.

Common Gate Parts & Welding Problems We See in Enterprise Homes

  • Builder-grade operators that trip and overload. In Enterprise production homes, the original installer often sized the opener for a lighter gate than the one actually hung, so the motor trips repeatedly and fails early. The fix is usually correcting the operator sizing and the gate’s swing, not just resetting the breaker.
  • Manual gates that get automation bolted on. Adding an opener to a gate that was installed manual often exposes missing safety photocells and a hinge post too light to carry the load. That leaves a real choice between a proper post replacement and an operator install that will keep giving trouble.
  • No power or conduit run from the build. Most of these homes never had a power run stubbed in for a gate operator. Retrofit automation means trenching through caliche-heavy backfill, which drives up cost and time, so it’s worth planning before you buy the opener.
  • Leaning posts and sagging gates. The caliche backfill behind so many block walls here shifts with the wind, and posts lean within a few years. Re-anchoring or replacing the hinge post is what actually corrects the sag; tightening hinges only masks it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Parts & Welding in Enterprise, NV

Here’s what the work typically runs in Enterprise, so you can budget before you call. A hinge replacement on a standard wrought-iron or aluminum gate runs $150 – $300 per gate, and a post replacement, including digging through caliche and re-anchoring in HOA-matched material, runs $350 – $850 depending on depth and access. Rail repair on a vinyl or aluminum gate is usually $120 – $280. Small custom welding jobs run $150 – $400. Adding an operator, if you’re going that route, means a power and conduit run that often runs $600 – $1,500 on top of the operator itself. Every price is quoted and agreed before a single bolt is turned, and there’s never a surprise on the bill.

Current offers include $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, and an $89 Seasonal Tune-Up, plus a standing 5% Senior and Veteran discount.

We Also Serve Cities Near Enterprise

We work across the southwest valley and the surrounding communities, including Spring Valley, Paradise, Winchester, and Henderson. If you’re just outside Enterprise, call and we’ll confirm coverage before we schedule. You can also read more about Gate Parts & Welding in Enterprise and the neighborhoods we serve.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Enterprise

Call Ironworks Gate Co. for Gate Parts & Welding in Enterprise

Whether your gate is leaning, dragging, or stuck on an operator that keeps tripping, we can get it closing like the day it was hung. Every job is quoted up front, agreed before we start, and protected by the 90-Day Done Right Promise in writing. Call (888) 276-7609 for a free estimate and a live person who’ll pick up.

Written by the team at Ironworks Gate Co.

Why Enterprise Chooses Ironworks Gate Co. Boulder City

We set the standard for gate parts & welding in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."

Layla Haddad
★★★★★

"The repair is holding. He was quite a bit later than the window I was given and nobody called me about it, I had to call them. The work itself was done well once he arrived."

Ruben Morales
★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez

Ready for Gate Parts & Welding in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(888) 276-7609

Request a Free Estimate in Enterprise

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch