Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Henderson
If you’re adding a driveway gate, replacing a worn-out swing gate, or putting a pedestrian gate along a courtyard wall, we install them across Henderson – from Green Valley and Anthem to Seven Hills and Lake Las Vegas. We know this city’s subdivisions, we know the HOA design reviews that come with them, and we know what the desert sun does to iron and operators after a few summers. Installation work here is measured, ordered and scheduled, so we start with a free on-site measure and a written, agreed price before anything gets ordered. Call (888) 276-7609 and a live person answers, day or night.
Why Ironworks Gate Co. Boulder City Is Henderson’s Preferred Gate Installation Company
Henderson homeowners call us because they’ve already been let down once by a generalist who hung a gate that sagged in a year or wired an operator onto the wrong circuit. Our technicians have up to 13 years of experience, are background-checked and arrive in uniform, and they work in your yard the way they’d work in their own mother’s. We handle the whole scope – from hinge posts and welds to keypads, photocells and automation – so there’s no finger-pointing between trades.
Every installation is covered by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No arguing, no paperwork chase. We service nine automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule – which matters in Henderson, where the operator on your gate is whatever the builder chose years ago. And when you call, a live person picks up 24 hours a day, seven days a week. Not a voicemail tree, not a callback queue.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Henderson
Driveway Gate Installation in Henderson
Most Henderson driveway gates go on stucco-on-frame homes in 1990s-to-2010s subdivisions, and the lot line usually decides whether you want a single swing or a double. We set posts deep enough for the desert’s rare monsoon gusts, then hang the leaf so it clears the driveway through every inch of its arc. If your HOA in Green Valley or Anthem has an approved iron finish, we build to that spec rather than substituting something close.

Pedestrian Gate Installation in Henderson
A courtyard or side-yard pedestrian gate is often the first thing a visitor sees, so the finish and hardware have to match the driveway gate and the community’s design guidelines. We install wrought-iron and ornamental pedestrian gates with self-closing hinges and latches that don’t rattle loose in the heat. In the age-restricted communities around Sun City Anthem, we also fit gates with hardware that’s easy on older hands.

Sliding Gate Installation in Henderson
Sliding gates suit Henderson properties where the driveway is short and a swing gate would eat the parking space. The installation lives or dies on the track and the foundation under it: a level concrete pad, a track that sheds dust rather than trapping it, and rollers sized for the weight of the leaf. We pour or repair the pad as part of the job so the gate doesn’t drag within a season.

Swing Gate Installation in Henderson
Swing gates are the most common residential choice in Henderson, and they’re also the most often automated after the fact. If we’re adding an operator, the hinge post gets reinforced first – a manual gate that was never built for the weight and cycling of automation will rack its post and strain the motor. We size the post, the hinges and the operator together so the whole assembly works as one piece.
Security and Double Gate Installation in Henderson
For wider driveways and side-yard access, double gates need a center drop rod or an electric latch so both leaves lock together. In guard-gated and perimeter settings around MacDonald Ranch, we install security gates with keypad and remote access tied to DoorKing or LiftMaster systems. Every gate we install leaves with working entrapment protection, not just a motor and a remote.
Trusted Brands We Service in Henderson
We’re trained and equipped on nine gate-automation brands, and the ones we see most often on Henderson gates are LiftMaster, Linear, Elite, Mighty Mule and DoorKing. We don’t claim to keep parts stocked on a truck or in a Henderson warehouse, because we don’t – we diagnose first, then order exactly what your gate needs. That keeps the price honest and the turnaround predictable. Whether your gate carries a builder-era Mighty Mule or a newer LiftMaster, the correct fix is made on the first visit wherever possible.
Common Gate Installation Problems We See in Henderson Homes
Henderson’s newer subdivisions create a specific set of installation problems. Here’s what we run into most.
- Builder-grade operators on undersized wiring. Original builders often tapped the gate operator into a landscaping circuit, and the resulting voltage drop burns out control boards once the summer heat sets in. We trace the circuit and add a dedicated power and conduit run rather than swapping a board that will fail again.
- Manual gates converted to automatic without a reinforced hinge post. The added weight and constant cycling rack an ordinary post, and the gate sags until the operator strains and quits. We brace or replace the post before the motor goes on.
- Missing or misplaced safety photocells. Plenty of builder installs skip entrapment protection or mount sensors where desert dust clogs them, so the gate fails a UL 325 check. We place and aim sensors so they stay clear of blowing dust.
- Sun-baked finishes and hardware. UV-degraded paint, faded powder coat and dried-out hinge seals are routine after a few Henderson summers. Matching the community’s approved iron finish during a replacement is part of the job, not an afterthought.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Henderson, NV
Installation pricing in Henderson depends on the gate type, the width, the finish and whether we’re running new power. A typical pedestrian gate installation runs $900 to $2,200. A single driveway swing gate with posts and hardware runs $2,400 to $5,500, and a double driveway gate runs $4,500 to $9,000. Adding an operator, a dedicated power and conduit run, and safety photocells usually adds $1,800 to $3,500 depending on the brand and the run length. A security gate with keypad access adds $600 to $1,400. These are real ranges for the Henderson market, and we settle on a written, agreed price before a single bolt is turned – no surprises on the bill. Free estimates, and standing offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Henderson
Henderson keeps us busy, and we also install gates in Boulder City, Whitney, Paradise and Enterprise. If you’re on the edge of the city or just over the line, the same measure-first approach applies. You can read more about our full Gate Installation services or our work in Henderson before you call.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Henderson
You match it by getting the design-review approval in writing before the gate is ordered. Henderson’s HOA design-review boards in master-planned communities like Green Valley and Anthem require gate installations to match approved iron finishes and hardware exactly, so a new gate often needs architectural-approval paperwork before a single post hole is dug – a step that doesn’t exist in older, non-HOA parts of the Vegas valley. We work from your community’s approved spec and confirm the finish and hardware against it, so the gate passes review the first time. Call (888) 276-7609 to talk through your HOA’s requirements – the estimate is free.
Usually it can be automated, but only after the hinge post and frame are checked for the added weight. In Henderson’s newer subdivisions, a builder-grade LiftMaster or Linear operator on a driveway swing gate frequently fails within a few years because the original install skipped a dedicated power run and relied on a shared circuit, causing voltage drops that fry control boards. A qualified local tech typically traces the circuit, adds a dedicated conduit run, and replaces the operator with a UL 325-compliant unit with working safety photocells – often discovering the gate itself was installed manual and lacks the reinforced hinge post needed for automation. We check all of that during the free measure and quote the whole job before work starts.
It’s usually the wiring and the placement, not the motor alone. Shared or undersized circuits drop voltage, and the control board takes the damage when temperatures climb past 100°F. We trace the circuit, add a dedicated run if needed, and set up the operator so it isn’t working against a dragging gate or a clogged track. Call (888) 276-7609 and we’ll diagnose it on site – estimates are free.
An automatic gate needs working entrapment protection that meets UL 325 – typically properly placed photocells, and in some cases edge sensors – so the gate reverses or stops when something is in its path. Many builder installs in Henderson skip it or mount the sensors where desert dust and blowing grit clog them, which fails a safety check. We place and aim the sensors to stay clear, and we test them before we leave. Call (888) 276-7609 for a free estimate on bringing your gate up to standard.
In most cases it’s the gate and the track, not the operator. A dragging sliding gate usually means a settled or unlevel concrete pad, worn rollers, or dust packed into the track. In the age-restricted communities around Sun City Anthem and Sun City MacDonald Ranch, we also see operators straining because the leaf was never sized for the load. We check the pad, track, rollers and operator together and quote the fix up front. Call (888) 276-7609 – estimates are free, and a live person answers 24 hours a day.
Get a Free Gate Installation Estimate in Henderson
Whether you’re adding a driveway gate in Anthem, replacing a faded swing gate in Seven Hills, or bringing a builder-era operator up to code in Green Valley, the first step is the same: a free on-site measure and a written price you agree to before any work begins. Every job is backed by our written 90-Day Done Right Promise. Call (888) 276-7609 for a free estimate – a live person answers, day or night.
Written by the team at Ironworks Gate Co.