Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Enterprise
If you live in Enterprise and your gate needs to go in, go up, or go automatic, you’re in the right place. We handle driveway gates, swing gates, sliding gates, and pedestrian gates for homeowners throughout 89139, and we know this corner of the southwest valley well enough to price a job accurately the first time. Enterprise is full of newer production homes, and gate work here looks different than it does five minutes up the road. A live person answers every call, day or night. Reach us at (888) 276-7609 and we’ll set a free estimate.
Why Ironworks Gate Co. Boulder City Is Enterprise’s Preferred Gate Installation Company
Our technicians have up to 13 years of experience installing gates across the southwest valley, and that experience shows up in the details Enterprise homeowners care about: a post set deep enough to hold, a hinge that lines up, an operator wired so it doesn’t strain. We connect you with independent local professionals who do the work, and every completed job is covered by our written 90-Day Done Right Promise, the Keystone Standard. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Enterprise homeowners have told us for a long time that they don’t want the cheapest bid. They want the job done once, done correctly, and guaranteed in writing, and that’s exactly what we sell. We’re the dedicated gate specialist for this trade only, not a generalist crew that hangs a gate between fence jobs. When you call us in Enterprise, you reach a person, not a voicemail tree. We’re proud to serve local communities and plan to be doing it for a long while yet.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Recommended: Our Gate Services in Enterprise
Every gate in Enterprise is a little different, and so is every driveway. Here’s how we approach the work most homeowners in 89139 actually need.
Driveway Gate Installation in Enterprise
Most of the driveways we see in Enterprise’s newer tracts were graded for a gate that was never hung, or hung with a builder-grade panel that was meant to be temporary. We install wrought-iron, aluminum, and vinyl driveway gates that match the subdivision’s approved style, sizing the opening to what’s actually on the ground rather than what the plans said. If automation is part of the plan, we handle the power and conduit run at the same time so it’s done once.

Swing Gate Installation in Enterprise
Swing gates are the most common request in the master-planned communities around Mountain’s Edge and the 89139 corridor, and they’re also where we see the most sag. A swing gate is only as good as its hinge post, so we set that post in concrete and correct any sag in the panel before the gate ever comes off the sawhorses. Full double swing gates for wide driveways are a regular job here too.

Sliding Gate Installation in Enterprise
Sliding gates are a better fit for tight driveways and side yards where a swing won’t clear the block wall. In Enterprise’s newer subdivisions, caliche-heavy soil makes the footing work harder, so we anchor the track and the operator pad properly before hanging the panel. A sliding gate that runs true on day one runs true for years.

Pedestrian Gate Installation in Enterprise
A pedestrian gate is the one you use every day, and it should feel solid in the hand. We install walk-through gates that match your driveway gate’s style, with latches that line up and self-closing hinges where the HOA or local code calls for them. For security gates and driveway access control, we set keypads and entry hardware so the whole property reads as one design.
Trusted Brands We Service in Enterprise
We’re trained and equipped to work on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t claim to stock every part. What we do is show up knowing the system on your driveway, so the correct fix gets made the first time. Whether your gate is running a LiftMaster operator or an older Mighty Mule, we can service it or recommend a replacement that fits your gate and your HOA’s rules. If a part needs ordering, we tell you up front and give you a written price before we touch a bolt.
Common Gate Installation Problems We See in Enterprise Homes
Enterprise gate problems are their own breed. The housing stock here is newer, so we’re rarely repairing rusty vintage steel. We’re fixing builder-grade work that was never meant to last and re-engineering it for the climate.
- Builder-grade operators that underperform. On a lot of newer homes around Enterprise, the original installer used undersized wiring or skipped the conduit run entirely. That causes voltage drop, which turns into a motor that labors and fails early. We run proper power and conduit so the operator gets the current it needs.
- Adding automation to a manual gate without upgrading the hinge post. Bolting an opener onto a gate hung on a light post is asking for trouble. Rapid sag and operator strain follow, and we’d rather re-set the footing first than sell you a motor that eats itself.
- Caliche backfill that lets posts lean. In the newer tracts of 89139, posts and footings often sit in shallow, caliche-laced backfill behind the block wall. Alkaline soil makes footings hard to dig and quick to crack around their anchors, so hinge posts lean and gates sag within a few years. We dig out the old footing and re-set it in concrete.
- UV and monsoon wear on lightweight panels. Extreme desert heat and very low humidity bake and warp vinyl, fade finishes, and dry out hardware, while summer monsoon gusts work hinges and latches loose. A standard tune-up in Enterprise means checking hinge alignment and hardware torque, not just oiling the motor.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Enterprise, NV
A new pedestrian gate in Enterprise typically runs $450 to $900 installed, a standard single swing driveway gate $1,200 to $2,800, a sliding gate $2,000 to $4,500, and a full double drive gate $2,500 to $6,000 depending on width and material. Adding an automatic operator usually adds $900 to $2,500, and the power and conduit run can add $400 to $1,500 if the build didn’t leave you one. Matching an HOA-approved wrought-iron pattern can nudge the material cost up, because the pattern has to be exact. Every price we give is quoted and agreed before any work starts. Estimates in Enterprise are free, and we offer a free second opinion on any written estimate from another company.
We Also Serve Cities Near Enterprise
Enterprise sits between a lot of neighboring communities we work in too. If you’re just outside 89139, we also serve homeowners in Spring Valley, Paradise, Winchester, and Henderson. The same technicians, the same written guarantee, and the same careful footing work. If you’re not sure whether your address falls in our service area, call and ask.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Enterprise
Yes, usually, but only if the gate and its posts can handle it. On a manual gate, the first thing we check is the hinge post and footing. If the post is undersized or set in loose caliche backfill, we re-set it before mounting an operator. We also confirm the gate’s style is on your HOA’s approved list. Once the structure is right, we handle the power and conduit run and mount a LiftMaster, Linear, or DoorKing operator to match your gate. Call (888) 276-7609 for a free estimate on automating your Enterprise gate.
Your gate sags fast because the hinge post was set into shallow, caliche-heavy backfill behind the block wall. In Enterprise’s newer tracts, builders often skipped a deep concrete footing, and caliche-laced alkaline soil cracks and shifts around the anchor within a few years. The fix is to dig out the old footing, re-set the hinge post in concrete, and correct the sag in the panel before re-hanging. That’s a job for a trained pro with a post hole digger and a level, not a Saturday project. Call us for a free estimate and we’ll get it square again.
Yes. In Enterprise, almost every gate in a master-planned community is governed by an association’s approved style list, and that shapes what a replacement or new installation can look like. It affects the iron or vinyl pattern, the finish color, and sometimes the operator and hardware. This constraint is what makes gate work in Enterprise different from neighboring unincorporated tracts that don’t have design review. We check the approved pattern before we order a single part, so you don’t end up with a gate that has to come back out.
Automatic gates in Enterprise need a safety photocell and proper obstruction sensing, and we install both on every operator job. A gate that closes on a person or a car is a serious hazard, so we set photocells at the right height, test the reverse function, and confirm the operator’s sensitivity. It’s part of every automatic gate job we do, not an add-on. Leave this to a trained technician; a gate motor has real force behind it. Call (888) 276-7609 and we’ll walk you through what your gate needs.
Your builder-installed operator keeps failing because the original wiring was likely undersized or the conduit run was skipped entirely. That causes voltage drop, which makes the motor work harder than it should and shortens its life. We see this constantly in the newer production subdivisions around Enterprise. The fix isn’t always a new motor; sometimes it’s re-running the power and conduit correctly to the operator location. A LiftMaster or DoorKing unit on proper wiring will outlast a cheap operator on bad wire every time.
Get a Free Gate Estimate in Enterprise
Whether you need a new driveway gate, a pedestrian gate, or want automation added to the manual gate you’ve been wrestling with for years, we’d like to take a look. We’ll check your HOA-approved pattern, examine the posts and footings, and give you a written price quoted and agreed before any work starts. Every job comes with our 90-Day Done Right Promise and our $50 Off Any Repair Over $250 standing offer, plus 5% off for seniors and veterans, always. Call (888) 276-7609 today for your free estimate. A live person answers, day or night.
Written by the team at Ironworks Gate Co.