Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Boulder City Homeowners
A gate that won’t open or won’t latch gets fixed fast here. Most gate repair calls in Boulder City are handled on the first visit, and we quote the price before we touch a single bolt. Our technicians have up to 13 years of experience and are trained on the automation brands that show up on driveways around town, so the correct fix is made the first time. Whether it’s a sticking hinge on a canyon-wind gate off Utah Street or an operator that quit on a property near Boulder Creek, call (888) 276-7609 and a live person answers, day or night. You’ll get a square deal: upfront price, no surprises on the bill.

What Our Gate Repair Service Includes
Electric Gate Repair
Electric gates run on low-voltage control wiring and a motor that has to fight gravity, wind, and age every single day. When one stops mid-travel, hums without moving, or trips a breaker, the cause is usually in the control board, the transformer, or a failed limit switch. We test the circuit and the operator together, and we flag anything on the electrical side that needs a licensed electrician before we button it back up.
Automatic Gate Repair
Automatic gates fail in patterns. The photo-eye gets knocked out of alignment, the arm sags, or the logic board forgets where “closed” is. We check the safety edges and the obstruction sensors on every automatic gate call because a gate that closes on a child or a car is a serious problem, not a nuisance. Then we recalibrate the travel limits and test the reverse cycle until it’s right.
Hinge & Post Repair
Hinges carry the whole weight of a swinging gate, and a worn hinge shows up as sag, drag, or a gate that scrapes the ground. We replace bent hinges, re-weld cracked hinge mounts, and check the post for movement at the base. A loose post gets addressed before any hinge work, because a new hinge on a shifting post won’t hold.
Gate Realignment
Realignment is what you need when the gate latches sometimes and misses other times, or when the gap at the top of the gate isn’t the gap at the bottom. Seasonal ground movement and settling are common around Boulder City, and a gate hung years ago can drift out of square without anything actually breaking. We measure the frame and the posts, then bring the gate back to true.
Lock Repair
A gate lock that sticks, spins, or won’t catch is a daily annoyance and, on a driveway gate, a security gap. We repair mechanical latches, keyed locks, and magnetic locks tied into an access system, and we check that the strike plate lines up with the gate after any realignment work. If the lock is tied to a keypad, we test the whole chain, not just the hardware.
Weld & Rust Repair
Rust starts at welds and at the bottom rail where water sits, and desert wind drives grit into every joint. We grind out rusted sections, re-weld them properly, and treat the metal so the repair lasts. Weld repair is structural work; a gate that’s cracked at a hinge or a rail can fail under its own weight, so we don’t treat it as a cosmetic job.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Repair
We service DoorKing equipment and know where it wears out – the control board and the loop detector are usually the first places to look when a commercial-grade operator stops responding. We also work on LiftMaster residential operators, where a failing capacitor or a misaligned safety sensor accounts for a lot of the “it just quit” calls we get. Elite and Mighty Mule operators show up on smaller residential gates in this area too, and we’ve learned their quirks, including the battery and solar setups Mighty Mule owners rely on.
Our technicians are trained and equipped on nine leading gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters because the correct fix depends on the specific operator in front of us, not a generic guess. Whether you have a DoorKing system or any other make, we can help.
Signs You Need Gate Repair Right Now
- The gate stops or reverses on its own. This usually points to an obstruction sensor or a failing limit switch. An operator that reverses unpredictably can damage the gate or the arm, and it’s a safety issue if it closes on something in its path.
- The gate drags or scrapes the ground. Drag means the gate has dropped or the hinges are worn. Left alone, the extra strain transfers to the operator motor and shortens its life.
- You hear grinding, clicking, or a loud hum. Grinding at the motor or arm usually signals worn gears or a failing bearing. A hum with no movement means the motor is trying to run against a jam or a bad board.
- The gate won’t latch or lock. A gate that doesn’t catch isn’t holding the property line. This is often alignment or a worn strike, and it’s worth fixing before the latch fails completely.
- Rust and cracks at the welds. Cracks at a hinge or a bottom rail can grow under wind load. Visible rust on a weld means the joint has lost some of its strength.
Our Gate Repair Process – Step by Step
- 1
You call and a live person answers. No voicemail tree, no callback queue – 24 hours a day, 7 days a week. We ask what the gate is doing, what brand the operator is, and how old the gate is so we arrive prepared.
- 2
We diagnose on site. We test the operator, the control board, the sensors, and the gate’s physical movement. On automatic gates we check the safety edges and photo-eyes as part of the diagnosis, not as an afterthought.
- 3
We give you a written price before any work starts. No surprises on the bill. You approve the number before we turn a bolt, and if you have another written estimate, we’ll give you a free second opinion on it.
- 4
We make the repair. Most jobs are completed in a single visit, including hinge replacement, realignment, and weld repair. When a part has to be ordered, we tell you the timeline up front.
- 5
We test and back it in writing. We run the gate through a full open-close cycle and check the reverse safety function. Every completed job carries our 90-Day Done Right Promise: if it isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Boulder City?
Gate repair in Boulder City typically runs $150 to $450 depending on the problem, and most jobs are priced and agreed before work starts. A sticking hinge or latch repair often falls in the $150 to $250 range. Gate realignment typically runs $200 to $350. Operator repair, including board or sensor work on an automatic gate, is usually $250 to $450, and weld or rust repair depends on how much metal has to be cut out and replaced.

- What affects the price: the brand of operator, whether the cause is mechanical or electronic, how accessible the hinge and post are, and whether parts have to be ordered.
- How to avoid overpaying: get the price in writing before work begins, ask what the repair covers, and take the free second opinion on any written estimate. We also take $50 off any repair over $250.
- What’s included in a free estimate: an on-site diagnosis, a clear explanation of what failed, and a written price. No obligation.
Call (888) 276-7609 for an exact quote – estimates are free.
Gate Repair Near Boulder City – Our Service Area
We handle gate repair in Boulder City and across the surrounding communities, including Gate Repair in Henderson, Gate Repair in Winchester, and Gate Repair in Whitney. Response times depend on traffic and where the day’s calls take us, but most repairs are scheduled the same day or the next. We also serve Paradise, Enterprise, Sunrise Manor, Spring Valley, Summerlin, North Las Vegas, and Las Vegas. Call and we’ll tell you honestly when we can be there.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Repair in Boulder City
Gate repair covers any fix that brings a gate back to working condition, from hinges and welds to the operator, sensors, and lock. It’s distinct from installation, which means a new gate, and from a tune-up, which is routine maintenance. If your gate moves, opens, closes, or locks the way it’s supposed to, the right repair is usually a targeted fix at the point of failure.
Most repairs are completed in a single visit, often within one to three hours on site once we arrive. Hinge replacement, realignment, and sensor work are typically the fastest. Weld repair and operator board replacement can take longer, and if a part has to be ordered we’ll give you the timeline before we leave. Call (888) 276-7609 and we’ll give you an honest estimate.
Gate repair in Boulder City typically runs $150 to $450 depending on the problem and the operator. Basic hinge and latch work sits at the low end; operator and control-board repair sits higher. The price is quoted and agreed before any work starts, so the invoice matches the quote. Call for an exact quote – estimates are free.
Yes. We service LiftMaster operators and we know where they wear out, including the capacitor and safety-sensor alignment on residential units. We’re trained and equipped on nine major brands, so the correct fix is made on the first visit regardless of the make. If you’re not sure what brand you have, we’ll identify it on site.
Yes. A live person answers our phone 24 hours a day, 7 days a week, so you can call when the gate fails at night or on a weekend. Emergency availability depends on the call volume that day, but we tell you honestly when we can be there. For a gate stuck open on a property line, call as soon as you notice.
Every completed repair is covered by our 90-Day Done Right Promise, a written, no-hassle guarantee. If something we repaired isn’t right, we come back and make it right. That’s the Keystone Standard applied to every gate job, no exceptions.
Clear the driveway and the area around the gate so our technician can work safely. If you have the gate’s manual or any record of the operator brand and model, have it ready, though we can identify it on site. Have any written estimates you’ve received from another company ready too, so we can give you a free second opinion.
Schedule Your Gate Repair Service in Boulder City Today
If your gate is dragging, stuck, or not closing the way it used to, call (888) 276-7609. A live person answers 24 hours a day, 7 days a week, and we’ll give you a free estimate and a written price before any work starts. Every job is backed by our 90-Day Done Right Promise. Call today – the estimate is free and there’s no obligation.
Written by the team at Ironworks Gate Co.