Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Boulder City
If your gate is stuck open, dragging on the ground, or the operator quit on the first hot week of June, we can help. Ironworks Gate Co. Boulder City handles driveway and estate gate repair for homeowners across Boulder City, from the 1930s dam-worker bungalows near the historic core out to the block-wall subdivisions off Buchanan Boulevard. We know this town’s gates, and we know why they fail here. Call (888) 276-7609 and a live person answers, day or night. Your price is quoted and agreed before a single bolt is turned, and every repair is covered by our written 90-Day Done Right Promise.
Why Ironworks Gate Co. Boulder City Is Boulder City’s Preferred Gate Repair Company
Boulder City isn’t Henderson. It isn’t Las Vegas. A gate here sits on a house that may have been built for a Hoover Dam worker in the 1930s, and the repair has to respect that. We understand the historic overlay and the design-review process, which means we don’t show up with a modern vinyl panel and hope nobody notices.
Our technicians have up to 13 years of experience, are background-checked and uniformed, and are trained on nine gate-automation brands so the right fix happens on the first visit, not the third. We’re trained and equipped on DoorKing, Elite, LiftMaster, Mighty Mule, and five more, so whatever is bolted to your driveway, we can diagnose it. Local homeowners call us back because we quote the price upfront, no surprises on the bill, and we stand behind the work in writing. Ask for the Free Second Opinion on Any Written Estimate and see the difference.
We take calls at 2 a.m. from Boulder City when a gate jams open and stays there. That’s not a voicemail tree. That’s a person who can get a repair scheduled. If you’ve been let down by a contractor who didn’t come back, our 90-Day Done Right Promise exists because of exactly that experience. The company that makes a 40-year-old gate close like the day it was hung.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Boulder City
Electric Gate Repair
Electric gates in Boulder City take a beating from the Mojave sun. Boards overheat, wiring dries and cracks, and a unit that ran fine in April starts tripping in July. We trace the fault to the board, the motor, the limits, or the power, and we quote the fix before we open the housing. If the board is obsolete and there’s no direct replacement, we tell you plainly instead of charging you to chase a part that isn’t made anymore.

Automatic Gate Repair
An automatic gate that stops halfway, reverses for no reason, or ignores the remote usually has a tired operator or a misaligned sensor. In the subdivisions from the 1970s through the 2000s, we regularly see LiftMaster slide operators with worn rack and pinion, the teeth chewed by heat expansion and lubricant dried out by UV. We service the operator and re-align the rack so the gate travels smooth again, or we advise replacement when the wear has gone too far to be worth fixing.

Hinge & Post Repair
Sag almost always starts at the hinge post, not the panel. In the historic core, a wood gate often droops because the original post has rotted at the footing, even though the gate itself looks fine. We repair the footing and re-hang the gate true, and where hand-forged hinges from the 1930s have seized or cracked, we fabricate replacements on-site to match the originals rather than swap in hardware that fails design review. This is the work Boulder City actually needs.

Gate Realignment
When a swing gate drags, catches on the ground, or won’t latch, the problem is alignment: hinges, posts, and the gate’s own frame all working against each other. We measure the whole assembly, true it up, and get the gate swinging square again. For a gate that’s older than most of the neighborhoods nearby, getting the geometry right is the difference between a gate that closes and one that fights you every time.
We also handle lock repair and weld and rust repair, because on steel gates in this heat, rust and worn welds are part of the same job. Our Gate Repair team covers the full scope from hinges and welds to keypads and automation.
Trusted Brands We Service in Boulder City
We’re certified to service nine of the leading gate-automation brands, including DoorKing, Elite, LiftMaster, and Mighty Mule, along with FAAC, BFT, Linear, Viking, and Ghost Controls. That breadth matters here because Boulder City driveways are a mix: a Mighty Mule on a newer subdivision gate, a LiftMaster slide operator on a 1990s build, a DoorKing access system on an estate. We don’t stock parts and we don’t claim to; what we do is diagnose the right brand correctly on the first visit so you’re not waiting on a callback or a wrong part. Most jobs are finished in a single visit. No waiting until Monday on a brand we don’t know.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Boulder City Homes
- Hand-forged hinges that seize or crack. The original iron hinges on 1930s gates in the historic core are no longer manufactured, and modern hardware doesn’t match the historic overlay. We fabricate replacements on-site so the gate keeps its character and passes design review.
- Wood gates drying, splitting, and warping. Summer highs over 100°F and relentless UV dry the wood fast, and the sag that follows usually traces to the hinge post footing, not the panel. Fixing the footing is often half the cost of replacing the gate.
- Slide operator board and rack failure. In the outlying subdivisions, heat-driven expansion and UV-degraded lubricant wear out the rack and pinion and stress the control board, often with no warning. A gate that ran quiet last summer can stop dead this one.
- Rusted steel frames and expanding metal. Low humidity doesn’t stop rust on steel gates; the sun and heat cycle it. We weld and treat the frame so the gate holds together instead of slowly pulling apart at the joints.
Pricing for Gate Repair in Boulder City, NV
Here’s what gate repair actually runs in Boulder City. A hinge or post repair typically runs $180 to $420, depending on whether the footing needs rebuilding and whether hand-forged hardware must be fabricated. Gate realignment usually falls between $150 and $325. A weld and rust repair on a steel gate runs $200 to $450 for most jobs. Electric and automatic gate repair, including a control board or operator service, is commonly $275 to $650, and obsolete boards or full operator replacement cost more.
What moves the price: the material (fabricated iron is not the same as a stock hinge), whether the post footing is involved, and whether the gate needs to meet historic design-review requirements. We quote the full job upfront and agree on it before work starts, so there’s no invoice surprise at the end. Estimates are free, and our $50 Off Any Repair Over $250 applies to most jobs. Call (888) 276-7609 for an exact quote.
We Also Serve Cities Near Boulder City
Boulder City homeowners aren’t the only ones we help. We also serve Henderson, Whitney, Paradise, and Enterprise, so if you’re just outside town or a family member nearby needs a gate fixed, we can help. Wherever you are, the same upfront pricing and written 90-Day Done Right Promise apply. For more on our full range of local gate work, see Gate Repair in Boulder City and call us to schedule.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Boulder City
In most cases the hinges can be repaired or replaced without replacing the gate. We fabricate replacement hinge and latch hardware on-site to match the originals, which also satisfies the historic district’s design-review requirements that modern stock hardware doesn’t meet. If the gate’s own frame is too far gone, we’ll tell you straight and recommend a material-matched swing gate that meets current UL 325 entrapment protection. Call (888) 276-7609 for an honest assessment, free estimate.
Summer heat is the usual culprit. Highs over 100°F expand the metal in the rack and pinion while UV dries out the lubricant, so the operator works harder and the control board takes the strain until it fails, often with no visible warning. A seasonal tune-up, our $89 Seasonal Tune-Up, catches worn rack teeth and heat-stressed boards before they strand you. Call us to schedule one before the next heat wave.
Yes, any automatic gate should meet UL 325 entrapment protection rules for safe operation. The rules cover the sensors, edges, and reversing behavior that prevent a gate from crushing a person or vehicle, and if your operator is old enough to predate them, the repair should bring it into compliance. We check entrapment protection as part of the job and tell you what’s needed. Call (888) 276-7609 for a free estimate.
The hinge post footing is almost always the cause when the panel itself is sound. The original 1930s post can rot at the base while the visible gate looks healthy, so the gate droops even though nothing on the panel failed. We repair the footing and re-hang the gate true, which is usually far less expensive than replacing a gate that only needed its post fixed. Call us for a free estimate.
In many parts of town, yes, but in the historic district the design-review process may require a material that matches the original 1930s housing, so a modern aluminum swap can be denied. That preservation constraint is unique to a government-built town like Boulder City; it doesn’t apply the same way in neighboring Henderson. We’ll tell you what the rules allow and quote both options before any work begins. Call (888) 276-7609 for a free second opinion.
If your gate is sagging, stuck, or old enough to have history, don’t wait for it to fail completely. Call Ironworks Gate Co. Boulder City at (888) 276-7609 for a free estimate. We’ll quote the price upfront, agree on it before we start, and back the work with our written 90-Day Done Right Promise. Done right, and backed in writing.
Written by the team at Ironworks Gate Co.