Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If your driveway gate is dragging, sagging, or straining against its operator, we can help. We handle gate parts and welding across Henderson, from hinge replacement and post repair to custom welding and rail work, and our technicians have up to 13 years of experience with the wrought-iron and automated gates that fill this city’s master-planned neighborhoods. We know Henderson because we work here – Green Valley, Anthem, Seven Hills, MacDonald Ranch – and we know what the desert does to these gates. Call (888) 276-7609 and a live person will answer, any hour.
Why Ironworks Gate Co. Boulder City Is Henderson’s Preferred Gate Parts & Welding Company
Henderson homeowners call us back for a few plain reasons. Our reputation here is built on craft first, not sales pressure. We’ve spent decades working on the same kind of decorative wrought-iron and automated driveway gates you’ll find throughout Henderson’s guard-gated and age-restricted communities, and we bring you a free second opinion on any written estimate so you can compare before you commit. Customer feedback from Henderson residents centers on the same few things: we show up when we say, we settle the price before we turn a bolt, and we stand behind the work. You can read our reviews and see the pattern. Our technicians have up to 13 years of experience with the automation brands on these driveways, so the first fix is usually the right one.
Response to Henderson is quick, and we plan for it. When you call, we’ll give you a real window rather than a vague promise. That may not sound like much until you’ve waited three days for a gate that won’t close. We also know which repairs turn into documentation problems in this city – the HOA design-review layer – so we’re ready for it before we arrive. Gate Parts & Welding is the work we do every day, and Henderson is where a lot of it happens.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
Hinge Replacement
A failing hinge is the number-one reason a Henderson gate starts to drag. Sun-baked bushings dry out and grind, and once a hinge seizes, every swing strains the operator and the frame. We replace worn hinges with hardware that suits the gate’s weight and its setting, then re-hang the gate so it swings clean and square.

Post Replacement
In Henderson’s master-planned neighborhoods, most posts were set for a manual gate and were never engineered for the torque an added operator puts on them. If a hinge post has settled or cracked at the footing, the gate will keep sagging no matter how often you adjust the operator. We reset or replace the post, check the footing, and build it back to carry the load it now has to carry.

Rail Repair
Monsoon gusts and simple age rack the rails on older wrought-iron work, and a bent rail throws the gate out of line with its latch and its track. We straighten, cut out, and reweld damaged rails so the gate closes true and the latch catches the way it should.

Custom Welding
Whether you need a cracked weld ground out and redone, a reinforcement gusset added, or a new section fabricated to match, our welding work is built for Henderson’s heat and dust. We match finishes and hardware as closely as the gate allows, which matters in this city’s HOA communities where the design review committee is paying attention.
Trusted Brands We Service in Henderson
We’re trained and equipped to service nine gate-automation brands, including LiftMaster, Elite, DoorKing, and Mighty Mule, so whatever is on your driveway, we know how it’s built and how it fails. We don’t claim to stock every part locally. What we offer instead is a proper diagnosis and an honest answer on turnaround, because the correct fix on the first visit beats a fast patch that fails by fall. If your operator is a brand we don’t recognize, ask us anyway – we’ll tell you straight whether we can service it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
- Builder-grade operators on manual-gate posts. In Green Valley and Anthem, many driveway gates went in manual and later got an operator bolted on. The hinges and post footings were never sized for the load, so the hinge post settles, the panel sags, and the rack-and-pinion goes out of alignment. Swapping the operator won’t fix that.
- Missing power and conduit runs. Plenty of these gates were built with no power run, so an owner later pulls exposed wire along the fence line. Voltage drop in Henderson’s summer heat is what kills control boards, and there’s usually no code-clean path for the wire.
- UV-baked paint and dried rubber. The desert sun fades powder coat and hardens seals across a wrought-iron gate. Betting that a mismatched touch-up will pass a design review is a mistake we see often enough to plan for.
- Dust-clogged tracks and photo-eyes. Blowing dust packs the tracks and clouds the photo-eye lenses. A gate that “won’t close” is sometimes a dirty sensor, not a failed operator.
Pricing for Gate Parts & Welding in Henderson, NV
Here’s roughly what the work runs in Henderson, given typical hardware, labor, and a matching finish:
- Hinge replacement: a typical hinge job runs $150 – $400 depending on hardware and how many are replaced.
- Post replacement: a hinge post reset or replacement runs $450 – $1,200, more when the footing has to be rebuilt.
- Rail repair and welding: $200 – $600 for the usual straighten-and-reweld work; custom fabrication is quoted per job.
What moves the number: how far the gate has settled, whether the footing is involved, and how hard your finish is to match. Every price is quoted and agreed before any work starts, so the invoice doesn’t surprise you. Estimates are free, and there’s a standing $50 off any repair over $250.
We Also Serve Cities Near Henderson
We also work in Henderson and the communities around it – Boulder City, Whitney, Paradise, and Enterprise. If your gate needs parts, welding, or a straight answer about what’s wrong, call us at (888) 276-7609. We’ll be there when we say.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
Yes. Matching the approved finish is central to the work here, because in Green Valley, Anthem, and the other master-planned communities a repair that doesn’t match the design-review-approved color and hardware can fail HOA review. We match finishes as closely as the gate allows and tell you upfront when a spot repair will be visible. Call (888) 276-7609 for a free estimate.
Usually because the operator was fitted to a gate whose hinge post and footing were set for a manual gate and were never reinforced. Every swing loads a post that wasn’t built for it, so the panel sags, the rack-and-pinion drifts, and the operator strains until it fails again. Fixing the post is what ends the cycle. Call (888) 276-7609 for a free estimate.
An HOA architectural approval is commonly required in Henderson’s master-planned communities, and some post replacements touch local permit rules too. We’ll flag what we know as we scope the job so you can line up your paperwork before we start. For an exact quote, call (888) 276-7609 – estimates are free.
Sun and heat are the usual culprits: a solar panel that’s dusty or shaded, a battery that has aged, and a gate hanging heavy on dried-out hinges all show up as a strain in summer. A full check of the panel, battery, and mechanical drag is the right place to start. Call (888) 276-7609 for a free estimate.
Break the beam with your hand while the gate is closing – a working photocell reverses the gate immediately. If it keeps going, stop using the gate and have it checked. Call (888) 276-7609 and we’ll get an experienced tech out to check it.
Written by the team at Ironworks Gate Co.