A Ironworks company - serving Boulder City, NV
Gate Parts & Welding in Boulder City, NV | Ironworks Gate Co. Boulder City

Gate Parts & Welding in Boulder City - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Boulder City

If you live in Boulder City and your gate has stopped closing square, or a weld has let go at the hinge, we can help. Ironworks Gate Co. handles gate parts and welding here as a dedicated gate specialist, and welders who work in Boulder City regularly are the ones who understand what the desert heat does to wood and steel. Our technicians have up to 13 years of experience, and we quote the price before a single bolt is turned. Call (888) 276-7609 and a live person answers, day or night. We’ll be there when we say.

Call (888) 276-7609

Why Ironworks Gate Co. Boulder City Is Boulder City’s Preferred Gate Parts & Welding Company

Boulder City gates are not like gates in Henderson or Las Vegas. The historic core is full of wood and metal panels hung decades ago, and the wrong repair shows from the street. We work on that reality, not a catalog assumption: matching profiles, fabricating what is no longer made, and respecting the historic overlay’s design review instead of forcing modern hardware into a 1930s bungalow opening.

Every job here is covered by our written 90-Day Done Right Promise. If something isn’t right after we leave, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard, and it applies to a hinge swap the same as a full post replacement.

We know Boulder City streets and neighborhoods, and we know how the long summers move a gate. Same-day and 24-7 emergency availability is there for gates stuck open or dragging on a driveway in the historic district. On installation and custom fabrication work we don’t promise same-day: those are measured, ordered, and scheduled, with a written price agreed beforehand. Either way, the call gets a real person.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Boulder City

Hinge Replacement in Boulder City

A 1930s bungalow gate with a hand-forged strap hinge will hang and drag after decades of 100°F-plus summers, and the latch stops lining up even though nothing was hit. We reset or replace the hinge, and on historic-core wood gates we fabricate a matching hinge rather than bolting on a modern strap that doesn’t fit the profile. That matters here because the historic overlay’s design review can require the original look.

Hinge Replacement in Boulder City

Custom Welding in Boulder City

Hand-forged 1930s hinges and latches on historic-district gates failed for a reason: nobody makes them anymore. We weld, bend, and fabricate replacements on-site so the gate keeps its original character and passes design review. For the wrought-iron and block-wall subdivisions, custom welding also handles cracked rails, broken latches, and a frame that has started to spread.

Custom Welding in Boulder City

Post Replacement in Boulder City

When a gate sags, the culprit is usually the post, not the panel. In Boulder City’s historic core, a loosened hinge post means resetting or replacing the footing so the gate hangs true again. We handle that work as part of the repair and finish with sag correction, so the gate swings and latches the way it did when it was first hung.

Post Replacement in Boulder City

Rail Repair in Boulder City

The Mojave sun dries, splits, and warps wood rails faster here than almost anywhere. We repair or replace cracked rails, weld steel frames that have expanded and pulled away, and match the material instead of dropping in a modern substitute. It’s the difference between a repair that lasts and one that needs a return visit next spring.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 276-7609

Trusted Brands We Service in Boulder City

We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, and Mighty Mule, which means we usually know the correct fix on the first visit whatever is on your driveway. We don’t claim to stock parts on a truck, and we won’t pretend we do; what we do promise is a straight answer on whether a part can be sourced, fabricated, or is time to replace the operator. Our Gate Parts & Welding team can tell you honestly which path is cheaper.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Boulder City Homes

Boulder City is a 1930s federal company town where the original Bureau of Reclamation housing, adobe, brick, and wood-frame bungalows built for Hoover Dam workers, still lines the historic core. That shapes what fails here. The problems below come up again and again:

  • Hand-forged hinges and latches on historic-core wood gates. Off-the-shelf replacements don’t fit, so parts work often means on-site fabrication that has to pass the historic overlay’s design review.
  • Steel frames rusting and expanding in Mojave UV while wood rails dry and warp. Hinges loosen against a swollen frame, and the gate sags at the hinge post instead of at the panel.
  • Legacy operators in older subdivisions running obsolete control boards. Discontinued electronics fail without warning, and entrapment protection like safety photocells is often missing on older installs.
  • Worn post footings behind sagging gates. After enough heat cycles the footing loosens, the post leans, and the whole gate drags even though the panel itself is sound.

Pricing for Gate Parts & Welding in Boulder City, NV

We price Boulder City work up front and agree the number before any work starts, so the bill matches the quote. Typical ranges for this market, subject to what we find on site:

  • Hinge replacement: $150 – $350 per hinge, more on historic-core gates that need a fabricated match.
  • Rail repair or re-weld: $180 – $450 depending on length and material.
  • Post reset or replacement: $350 – $900, with footing work on the upper end.
  • Custom welding and on-site fabrication: $250 – $750 for most household gate latches and hinge assemblies.
  • $50 off any repair over $250, and a free second opinion on any written estimate you already have.

A worn post or an obsolete control board can push a repair past the cost of a new gate or operator, and we’ll tell you plainly when that’s the case. Estimates are free.

We Also Serve Cities Near Boulder City

Boulder City homeowners and the surrounding communities get the same gate parts and welding work from us, including Henderson, Whitney, Paradise, and Enterprise. If you’re just outside the historic district, we handle block-wall and wrought-iron perimeter gates there too. For Gate Parts & Welding in Boulder City and nearby areas, one call covers it.

Serving Boulder City, NV – Our Local Coverage Area

We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Boulder City

Why Boulder City Chooses Ironworks Gate Co. Boulder City

We set the standard for gate parts & welding in Boulder City.

30-60 Min Response

Fast dispatch across Boulder City. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Boulder City

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Boulder City - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Boulder City Customers Say

Trusted by homeowners across Boulder City and surrounding areas.

★★★★★

"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."

Layla Haddad
★★★★★

"The repair is holding. He was quite a bit later than the window I was given and nobody called me about it, I had to call them. The work itself was done well once he arrived."

Ruben Morales
★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez

Ready for Gate Parts & Welding in Boulder City?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Boulder City.

(888) 276-7609

Request a Free Estimate in Boulder City

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch