Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunrise Manor
If your driveway gate is binding, stalling, or reversing halfway, the problem is usually in the hardware or the operator, not the motor winding. Sunrise Manor sits on the windy east edge of the valley, and the gates here take more abrasive grit than almost anywhere else in the area. We know the 89110 ZIP and the older gates that dominate it, and we send background-checked technicians who understand what dust does to hinges and tracks. Call (888) 276-7609 for a free estimate, and we’ll tell you straight whether a repair or a replacement is the smarter money.
Why Ironworks Gate Co. Boulder City Is Sunrise Manor’s Preferred Gate Repair Company
Sunrise Manor homeowners call us because they’ve been let down before and want the job done once. Our technicians have up to 13 years of experience, and they’re trained on the older LiftMaster and FAAC operators that were common in this area. We work in your home the way we’d work in our own mother’s, and every job is covered by our written 90-Day Done Right Promise.
Response time to Sunrise Manor is fast. Because we know the difference between a seized roller and a failed control board, most calls here get answered correctly on the first visit. A live person picks up the phone 24 hours a day, 7 days a week. No voicemail chain, no waiting until Monday.
What builds trust here is the local knowledge. We know that the open desert edge and the unpaved lots along the east side feed fine grit into every moving part, so we don’t misdiagnose a packed track as a bad motor. We also stand behind the job in writing. If it isn’t right, we come back and make it right, no arguing, no paperwork.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Sunrise Manor
Electric Gate Repair
Electric gate repair in Sunrise Manor often starts with an operator that runs for a few seconds and then quits. Heat and UV bake the operator housings and photo-eye lenses on older installs, which causes intermittent faults that look like motor failure. We test the board, the photocells, and the wiring before recommending anything.

Automatic Gate Repair
Automatic gates at Sunrise Manor homes sometimes reverse at mid-travel or open only partly. The cause is usually a sensor or a control board, not the motor itself. We service the major automation brands and get the exact fix right the first time.

Hinge & Post Repair
Hinge posts set in caliche-hard soil shift after a monsoon downpour undermines the footing, and the gate sags even after new hinges. We reset and brace posts so the gate hangs true again. This is one of the most common calls we get in the 89110 ZIP.

Gate Realignment
When a gate drags on the ground or the latch won’t line up, realignment restores the swing or slide path. We check the post, the hinges, and the track as a system rather than tweaking one piece. That keeps a binding gate from coming back a few months later.
Trusted Brands We Service in Sunrise Manor
The older operators in Sunrise Manor are usually LiftMaster or FAAC, and we’re trained and equipped to service both. We also work on DoorKing, Elite, Mighty Mule, Linear, Viking, Ghost Controls, and BFT, so the correct fix is made on the first visit whatever is on your driveway. We don’t claim to carry parts on a truck. What we do is diagnose accurately and get the right part fast, so your gate isn’t down for weeks.
Common Gate Repair Problems We See in Sunrise Manor Homes
- Seized rollers from packed dust. Fine Mojave dust packs solid into slide tracks and swing hinges, and the gate stops like the motor failed. It’s usually just grit, and a flush plus re-lubrication gets it moving again.
- Obsolete control boards on legacy operators. Heat and UV age the housings and photo-eye lenses on decades-old installs, so the gate runs intermittently. A trained eye tells a board fault from a motor fault.
- Hinge posts shifted in caliche soil. The hard ground here doesn’t absorb water quickly, and monsoon runoff can undermine a footing. The result is a sagging gate that binds even with new hinges.
- Worn hardware on aging gates. Many 89110 homes have wrought-iron or chain-link driveway gates installed decades ago. Retrofit and repair usually make more sense than tearing out a good gate.
A typical Sunrise Manor gate repair starts with a homeowner noticing a swing or slide gate that binds, stalls, or reverses intermittently. On inspection, the operator’s control board is often original to a decades-old install, the hinge post has shifted, and the rollers are packed with grit. A qualified local pro flushes and re-lubricates the hardware, corrects the sag at the hinge post, and checks safety photocells and loop detectors before deciding whether to retrofit a modern operator or replace the gate.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Sunrise Manor, NV
A typical electric or automatic gate repair in Sunrise Manor runs $180 to $420, depending on whether the fault is a sensor, a control board, or the motor. Hinge and post repair usually lands between $250 and $600 once a post is reset or braced. Gate realignment runs $150 to $350, and weld or rust repair on an older wrought-iron gate is often $200 to $500. What moves the number is the age of the operator, whether the post needs to be reset, and whether parts are still available. Every price is quoted and agreed before a single bolt is turned, so there are no surprises on the bill. Our free second opinion on any written estimate can save you from a needless replacement. Call (888) 276-7609 for an exact quote.
| Service | Typical Sunrise Manor Range |
|---|---|
| Gate realignment | $150 – $350 |
| Electric / automatic gate repair | $180 – $420 |
| Hinge & post repair | $250 – $600 |
| Weld & rust repair | $200 – $500 |
We Also Serve Cities Near Sunrise Manor
We cover the neighborhoods around Sunrise Manor and the nearby communities of Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just outside the 89110 ZIP, we can still help. For details on everything we do, see our Gate Repair service, or read more about Gate Repair in Sunrise Manor.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Sunrise Manor
It’s usually not the motor. A gate that opens partly and reverses is most often a misaligned photocell, a loose sensor wire, or a control board fault, and the reversing is the safety system doing its job. We test the sensors and board before touching the motor. Call (888) 276-7609 for a free estimate.
Because the grit that seizes them is fine Mojave dust packed solid inside the moving parts, and it doesn’t show on the outside. The open desert edge and unpaved lots feed that grit into every hinge and roller. Regular flushing and re-lubrication keeps them moving. Call us to schedule a service visit.
Most older gates in 89110 can be retrofitted if the frame, posts, and hinges are sound. We replace the operator and safety edges, realign the gate, and reset any shifted post. Replacement only makes sense when the gate structure itself is beyond repair. Call (888) 276-7609 and we’ll give you a straight answer.
The usual fix is resetting or bracing the hinge post so it sits true again, then realigning the gate. Caliche-hard soil and monsoon runoff are the common culprits here, so the post footing matters as much as the hinge. We quote and agree the price before any work starts. Call for a free estimate.
Yes. Modern automatic gates require entrapment protection, typically photocells and in some cases safety edges, and older installs often lack working sensors. You know it works when the gate reverses on contact or when the beam is broken. We test every safety device on the job. Call (888) 276-7609 to have yours checked.
Get Your Sunrise Manor Gate Fixed Right
Whether it’s a seized roller, a sagging post, or a legacy operator that needs a retrofit, we’ll give you an upfront price before we start and back the work in writing. A live person answers the phone 24 hours a day. Call (888) 276-7609 for a free estimate on gate repair in Sunrise Manor.
Written by the team at Ironworks Gate Co.