Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across North Las Vegas
If your driveway gate stopped moving after the last windstorm, or the opener hums and clicks but the gate won’t budge, we’re the call you make here in North Las Vegas. We work on metal driveway and courtyard gates throughout Aliante, Tule Springs, and Eldorado, and we know what happens to operators and hinges in a place that hits 110°F for weeks and then gets a spring gust that loads a solid gate like a sail. Motor repair and slide motor work are what we do most here. For homeowners in the 89084 and 89086 ZIP codes, a live person answers when you call (888) 276-7609, day or night.
Why Ironworks Gate Co. Boulder City Is North Las Vegas’s Preferred Gate Motor & Opener Company
We show up when we say we will, and we quote a price before anyone touches a bolt. That alone earns repeat calls from North Las Vegas homeowners who have been left waiting by generalist handymen. Our technicians have up to 13 years of experience on gate automation, and we’re trained and equipped on nine leading opener brands so the correct fix is made on the first visit, whatever is mounted on your driveway.
Around North Las Vegas, the gate work runs to metal. Most of the housing stock is post-1990s stucco-and-tile production homes with block-wall or vinyl fencing, and many were built with wrought-iron or aluminum gates rather than wood. That means the problems we see are welding, hinge, latch, and operator failures on steel and aluminum, not rotting panel replacement. We carry the tools and the practice for that kind of repair.
And every job we complete is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in North Las Vegas
We handle the full range of automation for driveway and estate gates. These are the four jobs we run most often in North Las Vegas, and each one is quoted upfront, in writing, before work starts.
Motor Repair in North Las Vegas
Most dead operators we open up in North Las Vegas homes aren’t actually dead. They’re bound. The gate has sagged at the hinge post, the rack and pinion has gone out of alignment, and the motor has been straining against the drag until it burned out. We correct the sag first, then check the safety photocell and loop detector before replacing anything electrical. That sequence saves North Las Vegas homeowners the cost of a needless motor swap.

Battery Backup for Gate Operators
A battery backup keeps your gate working through a power cut, which matters more here than it does in milder places. Summer heat is hard on batteries, so we test them under load rather than just checking the light on the panel. If your backup has been limping along since last year, it’s worth a look before the next outage catches you with the gate stuck open.

Slide Motor Installation and Replacement
Slide gates are common in the larger Aliante and Tule Springs lots, and they put real load on an operator. We size the motor to the gate’s actual weight and travel, not to what a spec sheet claims, and we set the limits and the safety edges so the gate reverses on contact. A properly sized slide operator on a well-hung gate lasts years longer than a mismatched one.

Linear Motor Service
Linear openers show up on owner-built and older North Las Vegas properties where a swing gate was fitted later in life. We service and replace Linear operators, diagnose the arm and control board, and re-set the force and travel limits to match the gate. If the arm is bending or the gate is drifting past its limit, that’s a symptom worth fixing before the board fails.
To see the full scope of what we handle, including access control and welding, visit our Gate Motor & Opener team page.
Trusted Brands We Service in North Las Vegas
We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters in North Las Vegas, where a single street can have a LiftMaster slide operator on one lot and a Mighty Mule swing arm on the next. We diagnose the brand that’s actually on your gate rather than forcing a replacement you don’t need. We don’t stock parts locally, so we confirm the correct part and the correct finish before we order, and most North Las Vegas repairs are completed in a single visit once that part arrives.
Common Gate Motor & Opener Problems We See in North Las Vegas Homes
- Wind-loaded gates that bind and bend. A solid metal infill gate catches every gust off the desert, and spring winds in North Las Vegas put real strain on hinges, the operator arm, and the gate frame. A gate that worked all winter can start dragging after one windy week.
- Footings that shifted in saturated ground. The occasional heavy rain storm soaks the ground around the hinge post, and a footing that was never set deep enough will move. That’s why a swing gate sags at the post, not the panel, and why replacing the opener alone won’t fix it.
- Lubricants baked dry by summer heat. When the temperature sits above 110°F for consecutive days, low-grade grease burns off and the rack and pinion starts binding. That drag is what kills motors early in North Las Vegas.
- Dust infiltration in the operator housing. The dry spring wind carries fine dust that works its way into the motor and control box. We clean and re-seal these as part of routine service, which is cheaper than a new operator.
Pricing for Gate Motor & Opener in North Las Vegas, NV
Here’s what the work actually runs in the North Las Vegas market. A typical motor repair on an existing operator runs $180 to $340, which usually covers a sag correction, a bound rack and pinion, or a control board and limit reset. A new slide motor installed, sized to the gate, runs $650 to $1,300 depending on the gate’s weight and travel. Battery backup replacement runs $220 to $450. A Linear motor service call runs $150 to $300. What moves the price most is whether the gate needs hinge-post work before the operator goes back on, and whether the replacement has to match an HOA-approved finish.
We quote and agree on the price before a single bolt is turned. No surprises on the bill. Estimates are free, and so is a second opinion on any written estimate you’ve already been given.
See the difference
Before
After
Before
After
Before
AfterThe North Las Vegas HOA Detail That Changes the Job
Here’s something that catches out-of-area technicians nearly every time. North Las Vegas is a master-planned-HOA powerhouse, and thousands of homes in communities like Aliante, Eldorado, and Tule Springs are governed by CC&Rs that dictate gate style, height, color, and setback. A gate that’s the wrong shade of bronze, or a few inches over the approved height, can trigger a compliance letter even if it works perfectly. A replacement operator or arm that doesn’t match the approved design is the same problem. So before we order a part for a North Las Vegas gate, we check the CC&R palette and the architectural drawings. A technician who doesn’t know that would put a black LiftMaster arm on a bronze gate and leave the homeowner with a letter from the association to sort out. We’d rather check first.
This is work that could only happen in a place built like North Las Vegas. Elsewhere, a gate opener is a gate opener. Here, it’s a piece of an association’s design standard, and the fix has to satisfy both the motor and the board. If you’re unsure what your community approves, call us and we’ll walk it through with you.
We Also Serve Cities Near North Las Vegas
We work throughout the valley, including Las Vegas, Sunrise Manor, Winchester, and Whitney. The same HOA and climate conditions follow us across the line, so the approach doesn’t change. If you’re searching for Gate Motor & Opener in North Las Vegas, you’re in the right place.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in North Las Vegas
Extreme summer heat is the main culprit: when highs regularly pass 110°F, low-grade lubricants bake dry, rack and pinion starts binding, and the motor strains until it fails. The fix is usually a proper re-lube, a sag correction at the hinge post, and a motor sized for the gate. Replacing the motor without finding the drag just repeats the problem next summer.
Use the manual release lever or key on the operator, following the manufacturer’s procedure for your brand, and release it only with the gate fully closed and no one nearby. Move the gate by hand slowly and prop it, then restore power and re-engage the release before running the operator. If you’re not sure how yours releases, call (888) 276-7609 and we’ll talk you through it safely.
Often yes. Many North Las Vegas communities specify the approved gate color and height in their CC&Rs, and some specify hardware finish to match. That’s why we check the association’s palette and drawings before ordering a replacement. If the finish is wrong, the gate can work perfectly and still generate a compliance letter.
It’s almost always the hinge post footing, not the gate panel. Heavy rain saturates the ground, and a footing that wasn’t set deep enough will shift, tipping the post and sagging the gate. The right fix is to correct the sag at the post before re-installing or re-tuning the operator. A sag that isn’t corrected is what burns out motors.
Safety devices are required on automatic gates, and photocells and safety edges are part of a compliant installation. They protect anyone who crosses the gate’s path, and they also protect the operator from binding and damage. We test loop detectors and photocells on every repair. If yours are missing or bypassed, call (888) 276-7609 and we’ll get them working.
Call Ironworks Gate Co. for Your North Las Vegas Gate Motor
If your gate is stuck, sagging, or the opener is straining, call (888) 276-7609 for a free estimate. We’ll tell you what’s actually wrong, quote the price upfront, and stand behind the work with our 90-Day Done Right Promise. A live person answers, day or night. Done right, and backed in writing.
Written by the team at Ironworks Gate Co.