Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Las Vegas
If your gate operator has quit on a long rural driveway off North Rancho or up toward the foothills, you already know the worst part is the wait. We handle gate motor and opener work across Las Vegas, from the master-planned northwest to acreage properties with a quarter-mile of gravel between the house and the road. Our technicians have up to 13 years of experience, and they know why Vegas motors fail: heat and dust, not rust. Call (888) 276-7609 and a live person answers, day or night.
Why Ironworks Gate Co. Boulder City Is Las Vegas’s Preferred Gate Motor & Opener Company
Gate automation on rural acreage is a different trade than flipping a residential operator. Wide farm gates, long cable runs, and driveways with no mains power within a thousand feet demand heavy-duty hardware and often a solar operator sized correctly for the load. Our team services the nine major brands, so the fix is right on the first visit rather than a guess followed by a return trip.
We back every gate job with the 90-Day Done Right Promise: a written guarantee, no arguing, no paperwork headaches. If it’s not right, we come back. That matters more than a low bid when the gate guards livestock or a long private entrance and you’re not standing at the end of the drive every evening to open it by hand. Las Vegas customers get a free second opinion on any written estimate, and upfront pricing settled before a single bolt is turned.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Las Vegas
Motor Installation
A new operator on a wide farm gate or a long slide gate needs load calculation before it needs a brand name. We check the gate’s weight, its span, and how much voltage loss the run to the operator will suffer on a rural Las Vegas property. Get the sizing wrong and the motor overheats on the fifth open of the day.

Motor Repair
Most Las Vegas gate motor repair calls come down to a cooked control board or a photo-eye packed with caliche dust. Both are fixable in a single visit when the technician carries the right parts and knows the brand. We’ll diagnose the operator itself and the gate’s travel before recommending a repair, since correcting a bind at the panel alone won’t hold if the hinge post is shifting.

Linear Motor
Linear operators are common on both residential slide gates and lighter acreage entrances around Las Vegas. These units are sensitive to limit-switch drift and to the fine dessert dust that works into the travel track. We service Linear motors directly, along with the safety edges and sensors that pair with them.

Slide Motor
Slide gates on long driveways take a beating from the rack and pinion and from monsoon wind that bends or derails a lighter panel. A slide motor that reverses mid-travel is often a sign of a stalled rack, a misaligned track, or a sensor tripping on dust. We diagnose all three rather than replacing the operator because it’s the expensive part.
Trusted Brands We Service in Las Vegas
Our technicians are trained and equipped to service nine major gate-automation brands, including DoorKing, LiftMaster, and Mighty Mule. We don’t claim to stock parts for every brand on a truck, but we know these systems well enough to identify the correct part on the first visit and get it ordered without guesswork. Whether your operator is a heavy DoorKing on a commercial-style entrance or a LiftMaster on a residential swing gate in the northwest valley, the diagnosis is direct and the fix is scheduled to fit the job.
Common Gate Motor & Opener Problems We See in Las Vegas Homes
Vegas operators fail in ways you don’t see in wetter climates. Here’s what we find most often:
- Cooked control boards on west-facing block walls. Surface temps on masonry and wrought iron in Summerlin-area HOAs regularly exceed 150°F in summer. The board bakes and dies by July, often intermittently at first.
- Caliche dust in the photo-eye and roller track. Desert dust packs the lens and jams the roller, causing false trips and binding on swing gates and slide gates alike.
- Solar and battery backup failures on long driveways. A solar panel that’s under-sized or shaded by a mesquite won’t keep up, and a battery that’s aged out won’t hold a charge through a hot afternoon.
- Monsoon damage on acreage gates. A microburst bends or derails a lighter panel, which then stresses the hinge post and rack and pinion. Repairing the panel without checking the post footing leads to a repeat failure.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor & Opener in Las Vegas, NV
A typical gate motor repair in Las Vegas runs $280 – $650, depending on whether it’s a board replacement, a sensor and lens, or a full operator swap on a rural driveway. Solar gate opener installation on a long entrance with no mains power runs $1,400 – $3,200 for the operator, panel, and battery, and a standard residential motor installation runs $950 – $1,800. Heavy-duty operators for wide farm gates and livestock entrances cost more because the sizing and the power run are bigger. Every price is quoted and agreed before we start work, and estimates are free. Call (888) 276-7609 for an exact number.
We Also Serve Cities Near Las Vegas
We work throughout the valley and into the surrounding communities: Winchester, North Las Vegas, Sunrise Manor, and Paradise. If your gate is on a rural driveway that straddles the city line, that’s no problem. Reach our Gate Motor & Opener team and we’ll schedule it. You can also read more about Las Vegas gate service for details on the area we cover.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Las Vegas
The operator is overheating from solar gain on the masonry, which routinely pushes surface temps past 150°F and cooks the control board. Relocating the operator out of direct afternoon sun, or shielding the enclosure, solves most of these. Call (888) 276-7609 for a free estimate on a board replacement or relocation.
Yes, and it’s often the most practical option on acreage where the nearest power is hundreds of feet away. The key is sizing the panel and battery for the gate’s weight and daily cycle count, then setting the panel clear of shade. A correctly sized solar setup runs reliably through summer. Get a free measure and written price by calling (888) 276-7609.
Caliche dust packed into the photo-eye lens or the roller track is the most common cause. The sensor false-trips because it can’t see clearly, or the track binds and the operator reverses on resistance. A cleaning and resealing of the track usually fixes it. Call for an exact quote, estimates are free.
If the board and sensors are the fault and the operator’s mechanism is sound, repair is the right call. If the motor itself is aging, drawing excessive current, or the operator is under-sized for the gate, replacement makes more sense than throwing parts at it. A diagnosis on site settles it. Call (888) 276-7609 for a free estimate.
Automatic gates need photo-eye sensors and, on many systems, safety edges that reverse the gate on contact. To check yours, wave a hand through the beam while the gate is closing; if it doesn’t reverse, the sensor needs service. Battery backup and a manual release are also worth confirming on rural gates. Call for an exact quote.
Get Your Gate Working Again
Whether it’s a solar operator on a long ranch driveway or a residential motor in the northwest valley, we’ll size it right, fix it correctly, and stand behind the work in writing. Call (888) 276-7609 for a free estimate. A live person answers, day or night.
Written by the team at Ironworks Gate Co.