Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Boulder City, NV
Hinge and post repair in Boulder City usually runs $145 to $420 per hinge or post, with a same-day service call often covering the full fix. The work covers two things that fail together: the hinge that carries the gate leaf’s weight, and the steel post that holds everything plumb. When either one goes, the gate sags, drags, or stops latching, and the opener motor starts working harder than it should. Ironworks Gate Co. Boulder City handles both as one job because they fail as one system. Call (888) 276-7609 and a live person answers, day or night.
This is a specialized piece of Gate Repair, not a general handyman task. A gate hinge takes hundreds of pounds of load on a driveway gate, and a post that has shifted even half an inch throws the whole swing out of alignment. We weld, we reset posts, and we align the leaf so the latch catches clean and the motor runs free. Our technicians have up to 13 years of experience, and every completed hinge and post job is covered by our written 90-Day Done Right Promise.
Key Takeaways
- Hinge and post repair in Boulder City typically costs $145 – $420, and most jobs are finished in a single visit.
- A dragging gate is usually a hinge or post problem, not a motor problem. Fixing the frame first saves the opener.
- Upfront pricing is settled before any bolt is turned, and estimates are free.
- Every repair is backed in writing by the 90-Day Done Right Promise.
When You Need Hinge & Post Repair
Boulder City sits at the edge of the Mojave, and that matters for gate hardware. Summer ground temperatures swing hard between day and night, and the caliche-heavy soil around town shifts with the seasonal heat. Posts set years ago can lean a fraction of an inch and stay that way for a season, then suddenly the gate won’t close. Here’s what we see most often:
- The gate sags and drags on the ground. A worn hinge pin or a hinge that has pulled loose from the post lets the leaf drop. You’ll see scrape marks in the concrete or dirt where the bottom rail rides.
- The post leans or has pulled out of the ground. Common after a wet winter followed by a dry summer. In older Boulder City neighborhoods, posts set decades ago can work loose from the concrete footing.
- The gate won’t latch or close squarely. A post that has twisted slightly means the leaf no longer meets the receiver. Homeowners often blame the latch when the real problem is the frame.
- The opener strains or reverses mid-swing. When a hinge binds, the motor on a LiftMaster or Mighty Mule operator fights the resistance and may trip its safety reverse. Repairing the hinge and post often fixes the opener complaint at a fraction of the cost.
- Visible rust streaks or cracked welds at the hinge plate. On welded steel gates, the hinge-to-post weld is the first place to fatigue. A cracking weld needs attention before the hinge tears free.
- The gate has dropped on one side after a storm. Wind and monsoon runoff push against a leaf and stress the anchor points. If one corner drops, the post or hinge has taken the load.
If any of these sound familiar, our Gate Repair in Boulder City service is the place to start, and hinge and post work sits right inside it.
Our Hinge & Post Repair Process
We don’t guess at what’s wrong and start swinging a hammer. The process is steady and it’s done in order, so the fix holds.
- We assess the gate under load. We open and close the gate by hand with the opener disengaged to see where it binds, and we check the post for plumb with a level. We look at the hinge plates, the welds, and the footing.
- We give you an upfront price. Before we touch a bolt, you get a clear price for the hinge repair, the post work, or both. No surprises on the bill. Estimates are free.
- We repair or reset the post. Depending on the failure, that means tightening and re-anchoring the post, welding a reinforcement plate, or resetting a loose post back to plumb in fresh concrete. We work with the gate still hung wherever it’s safe to keep your driveway secure.
- We rebuild or replace the hinges. Worn pins get replaced, loose hinge plates get re-welded, and we grease and align the pivot points so the leaf swings free. On heavy estate gates we match the hinge to the load so it lasts.
- We re-hang and align the leaf. The gate goes back on the frame and we tune the gap, the latch, and the travel so it closes squarely without a shove.
- We test the opener and hand it back. We re-engage the operator, test the limits and the safety reverse, and walk you through what we did. If your operator is a DoorKing or Elite system, we’re certified on those and check that the controls still match the new alignment.
Most hinge and post jobs are completed in a single visit. When we need a return trip to let fresh concrete cure, we tell you upfront.
Hinge & Post Repair Pricing in Boulder City
Hinge and post repair in Boulder City typically ranges from $145 to $420, and the total depends on how many hinges are involved and whether a post needs resetting. Here’s roughly what to expect:
| Job | Typical Range |
|---|---|
| Hinge replacement or re-pin (per hinge) | $145 – $220 |
| Re-weld hinge plate to post | $180 – $275 |
| Reset a loose or leaning post | $240 – $420 |
| Full gate re-hang and realignment | $200 – $350 |
| New post anchored in concrete | $300 – $500 |
What moves the number: the weight of the gate, whether the post is steel or wood, how much concrete work the footing needs, and whether the opener needs re-tuning afterward. A heavy wrought-steel estate gate with a buried footing takes more time than a light ornamental gate on a surface-mounted post.
We settle the price upfront before any work begins. If you have a written estimate from another contractor, take advantage of our Free Second Opinion, and remember that jobs over $250 get $50 Off Any Repair. We also offer an $89 Seasonal Tune-Up and a standing 5% Senior and Veteran discount. Estimates are free, so call (888) 276-7609 for an exact quote.
Why Ironworks Handles Hinge & Post Work This Way
We’re trained and equipped on nine gate-automation brands, including LiftMaster, DoorKing, Elite, and Mighty Mule. That matters for hinge and post repair because a sagging gate and a misbehaving opener are the same problem in different clothes. When we fix the frame, we can test the operator the right way and confirm the limits and safety reverse still work. You get one company that understands the metal and the motor.
Every job is guided by our K.E.Y.S. values: Krafted right, Every time, Your home first, Standing behind it. Our technicians are background-checked and uniformed, and they work in your yard the way they’d work in their own mother’s. A live person answers the phone around the clock, so you’re never stuck in a voicemail tree waiting until Monday. For the wider range of gate work we handle, see our main home page and the full gate repair services.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Boulder City?
Hinge and post repair in Boulder City typically costs $145 – $420 depending on the number of hinges and whether a post needs resetting. A single re-pinned hinge runs at the low end, while a full post reset with fresh concrete sits higher. Call (888) 276-7609 for an exact quote, and estimates are free.
Can you come today if my gate is dragging or won’t close?
Yes, a live person answers the phone 24 hours a day, and many hinge and post jobs are done the same day or next. A dragging gate puts strain on the opener, so the sooner it’s fixed the less chance of a bigger repair. Call (888) 276-7609 and we’ll find you a time.
Is it cheaper to repair the hinge and post or replace the whole gate?
Repairing the hinge and post is almost always cheaper than a full gate replacement and usually the right call. A sagging gate is a hardware and frame problem, not a reason to buy a new gate, and a hinge or post repair typically costs a fraction of replacement. If the gate itself is sound, repairing the frame is the sensible move. Call (888) 276-7609 for a free estimate and an honest recommendation.
Will fixing the hinge and post make my opener work again?
Often yes, because a binding hinge or a leaning post is frequently what makes an opener strain or reverse. When the gate swings free again, the operator no longer fights the resistance. If the motor itself has failed, we service nine major brands, including LiftMaster and Mighty Mule, and we’ll tell you straight whether the opener needs attention too. Call (888) 276-7609 to get it looked at.
Call Ironworks Gate Co. Boulder City
A gate that sags, drags, or won’t latch is a hinge and post problem that only gets worse with time. Fixing it early keeps the opener off the repair list and keeps your driveway secure. We’ll give you an upfront price, do the work right, and back it in writing with the 90-Day Done Right Promise. Call (888) 276-7609 for a free estimate today.
Written by the team at Ironworks Gate Co. Boulder City, serving Boulder City.