Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Parts & Welding for Boulder City Homeowners
Salt, sun, and dry desert air are hard on metal. In Boulder City, we see gate hinges seize, posts pull loose from caliche and hard-packed soil, and top rails crack at the weld seam after years of heat cycling. Our technicians, who have up to 13 years of experience on residential and estate gates, can look at a sagging gate and tell you which part gave out and why. Most parts and welding jobs are completed in a single visit, and every job carries our written 90-Day Done Right Promise. Call Ironworks Gate Co. at (888) 276-7609 to schedule a free estimate.

What Our Gate Parts & Welding Service Includes
We handle the full set of gate hardware and welding repairs that keep a driveway gate swinging or sliding the way it should. Here is what each piece of the work covers.
Hinge Replacement
Hinges carry the full weight of the gate leaf, and when they wear out you’ll feel it in the swing, in the sag, and in the latch that no longer lines up. We remove the worn hinges, check the gate frame for bent leaves or worn mounting plates, and fit new hinges rated for the gate’s size and weight. In Boulder City, where metal expands through long hot summers, we make sure every hinge pair is aligned so the gate doesn’t bind at one end of its arc.

Post Replacement
A leaning or wobbly gate post is usually a footing problem, not a hardware problem, and no amount of tightening will fix it. We pull the old post, dig out the failed footing, and set a new post with proper depth and concrete so the gate has something solid to swing from. Older properties near the historic district often have posts set shallow or in soil that has shifted over time, and we size the footing for the actual load of the gate.

Rail Repair
The horizontal rails are what keep a gate from twisting, and a cracked or bent rail is a structural warning you shouldn’t ignore. We repair or replace damaged rails, straighten frames that have taken a hit, and re-weld seams that have split from flex. A gate with a broken rail puts extra strain on the opener, so fixing the frame usually saves the motor from an early failure.

Custom Welding
Sometimes the right repair is a fabricated part rather than a replacement, and that is where welding matters. We weld ornamental iron, gate frames, hinge tabs, mounting brackets, and custom repairs on gates that were built for the property. If a section of decorative ironwork has broken or a bracket needs to be made to fit, we can fabricate and install it rather than telling you the whole gate needs replacing. For related work, see our gate repair service.
Gate Rollers
Sliding gates ride on rollers, and worn rollers show up as a gate that drags, jumps the track, or needs a push to get moving. We inspect the rollers, the track, and the guide posts for wear and misalignment, then replace damaged rollers and reset the gate so it rolls true. On a long driveway gate, one bad roller can strain the opener, so replacing them early protects the automation.
Latch & Lock
A gate latch that won’t catch, sticks, or leaves a gap lets the gate rattle and wears out the strike plate, the frame, and the lock mechanism. We repair or replace latches, locks, and strikes, checking alignment so the gate closes cleanly and locks securely. For access control work on automated gates, our gate access control service covers keypads, entry systems, and remote controls.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Parts & Welding
We’re trained and equipped on nine leading gate-automation brands, so whether your gate is a DoorKing slide operator or a LiftMaster swing arm, we know where those systems wear out and how to make the hardware work with them. DoorKing operators have particular sensor and reversing-edge requirements, and we understand those systems well enough to keep the repair compatible with the safety devices. On LiftMaster swing and slide operators, we know the gear and arm assemblies that tend to fail after years of service, and we check for those during a weld or hinge repair.
On the residential side, Mighty Mule and Elite openers are common on driveway gates, and we know where those systems show strain when the gate frame has moved or a hinge has given out. We also work with gates that have no automation at all, where the repair is purely mechanical. Whether you have DoorKing, LiftMaster, Mighty Mule, or any other make, we can help.
Signs You Need Gate Parts & Welding Right Now
- The gate sags or drags on the ground. A sagging gate usually means worn hinges or a loosening post footing, and the longer it drags the more damage it does to the frame and the ground beneath it. Catching it early keeps a hinge repair from turning into a post replacement.
- You see cracks or rust at a weld seam. Hairline cracks and surface rust at a joint are where a weld is starting to fail, and they widen with every swing. A quick re-weld now prevents a rail from snapping later.
- The latch won’t catch or the gate won’t line up. When the latch misses the strike, the gate has usually shifted on its hinges or the post has moved. Left alone, it wears out the latch and the opener, so it’s better to diagnose the alignment now.
- The slider jumps or grinds on the track. Worn rollers and debris on the track cause a sliding gate to hop and scrape, and the strain reaches the opener motor. Replacing rollers early is far cheaper than replacing a motor.
- The gate post leans or feels loose. A post that moves when you push on it is telling you the footing has failed or the soil has shifted. That is a structural problem and should be fixed before the gate falls or the opener is damaged.
Our Gate Parts & Welding Process – Step by Step
- 1
We inspect the whole gate, not just the broken part. We check hinges, posts, rails, rollers, latches, and the opener arm to find what caused the failure. A broken hinge is often a symptom of a post that has moved, and we want to fix the cause, not just the symptom.
- 2
We give you an upfront price before any work starts. You’ll know what the repair costs, what parts are involved, and what the warranty covers ahead of time. No surprises on the bill, and no work begins until you agree.
- 3
We complete the repair or weld on site. Most jobs are done in a single visit with the equipment and parts we need. For custom welding or fabricated parts, we schedule the work so it’s done right the first time.
- 4
We test everything before we leave. We swing or slide the gate, check alignment, test the latch and latch strike, and confirm the opener and safety devices still work with the repaired hardware. You see it working before we pack up.
- 5
We back it in writing. Every completed job carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right, no arguing and no paperwork to chase.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Boulder City?
A typical hinge replacement in Boulder City runs $150 to $350, while a post replacement generally runs $400 to $900 depending on footing depth and access. Rail repair and re-welding typically runs $200 to $500, custom welding starts around $250, and gate roller replacement runs $150 to $400. A latch or lock repair usually lands in the $125 to $300 range. These are ranges, not quotes, and the exact price depends on the gate’s size, the parts needed, and whether the frame has shifted.

What affects the price most is the scope of the underlying problem: a failed post footing costs more than a worn hinge, and a gate that has been dragging for years usually needs more than one component replaced. Rusted or bent hardware that has to be cut out also adds time. Staying ahead of small repairs is the best way to avoid overpaying, since a $150 hinge job can become a $900 post job once the footing fails.
Every estimate is free, and we give you an upfront price before any work starts. We also offer $50 off any repair over $250 and a free second opinion on any written estimate. Our Gate Parts & Welding in Winchester page covers the same work in that area.
Gate Parts & Welding Near Boulder City – Our Service Area
We serve Boulder City and the surrounding communities, including Gate Parts & Welding in Henderson, Winchester, Whitney, Paradise, Enterprise, and Las Vegas. Response times vary by location and schedule, and we confirm timing when you call. If you’re in the Boulder City area and need a hinge, post, or weld repaired, we can usually get to you quickly. For nearby coverage, see Gate Parts & Welding in Whitney.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Parts & Welding in Boulder City
Gate parts and welding is the repair of a gate’s physical structure and hardware, including hinges, posts, rails, rollers, latches, and welded joints. It is different from gate automation work, which covers motors and openers. In Boulder City, we handle both the metal repairs and the automation so the whole gate works together. Call (888) 276-7609 for a free estimate.
Most gate parts and welding jobs are completed in a single visit, often within a few hours depending on the repair. A hinge or latch replacement is quick, while a post replacement or custom weld may take longer because of the footing and curing time. We confirm the timeline when we give you your upfront price. Call (888) 276-7609 to schedule.
Most gate parts and welding repairs in Boulder City run between $125 and $500 depending on the part and the scope of the work. Hinge, latch, and roller repairs tend to be on the lower end, while post replacement and custom welding can run higher. The price is quoted and agreed before any work starts. Call (888) 276-7609 for an exact quote, and estimates are free.
Yes, we’re trained and equipped on nine leading gate-automation brands, including Mighty Mule, DoorKing, LiftMaster, and Elite. That means we can make sure a hardware repair doesn’t throw off your opener alignment or safety devices. Whether your gate has an opener or not, we can help. Call (888) 276-7609 to discuss your gate.
Yes, a live person answers our phone 24 hours a day, 7 days a week, including weekends and holidays. If a gate is stuck open, hanging, or unsafe, call us and we’ll help you sort out the next step. Emergency timing depends on the situation, so call (888) 276-7609 to get started.
Every completed job carries our 90-Day Done Right Promise, a written guarantee with no paperwork and no arguing. If something isn’t right within 90 days, we come back and make it right. That applies to hinge, post, rail, and weld repairs alike. Call (888) 276-7609 for details on your specific repair.
Clear the area around the gate, make sure the path is accessible, and if the gate is automated, let us know the brand and model ahead of time. If you have a written estimate from another company, we’ll offer a free second opinion. Then just call (888) 276-7609 and we’ll confirm the details before we arrive.
Schedule Your Gate Parts & Welding Service in Boulder City Today
If your gate is sagging, dragging, or showing cracks at a weld, call Ironworks Gate Co. at (888) 276-7609 for a free estimate. A live person answers the phone 24 hours a day, and we’ll give you an upfront price before any work starts. Every job is done right and backed in writing with our 90-Day Done Right Promise. Call today, with no obligation.
Written by the team at Ironworks Gate Co.