Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Summerlin
Gate parts and welding work in Summerlin isn’t the same job it is in older parts of the valley, and we treat it that way. Much of the housing stock in the 89135 corridor went up from the 1990s onward in master-planned villages, which means we spend a lot of our time on the ornamental metal, hinge posts, and openers that came with those builds. When your gate drags, seizes, or stops halfway, call us at (888) 276-7609 and a live person answers, day or night. We’ll get a technician out to look at the actual metal and the actual post footing before anyone quotes a repair.
Why Ironworks Gate Co. Boulder City Is Summerlin’s Preferred Gate Parts & Welding Company
We hear the same thing from Summerlin homeowners: the last outfit patched the panel, collected a check, and the gate sagged again by fall. Our answer to that is plain. We look at the whole gate – the hinge post, the footing, the rail, the operator arm – because on this housing stock the symptom is rarely where the failure started. That’s the kind of diagnosis that keeps a 55-and-over household from calling twice.
Our technicians have up to 13 years of experience with ornamental metal and automatic openers, and they’re background-checked and uniformed on every Summerlin visit. We service nine gate-automation brands, so whatever is bolted to your driveway, we’ve likely worked on it. Every completed job is covered by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right – no paperwork, no arguing.
We’re also straightforward about pricing. You get the number before a bolt is turned, and it doesn’t move afterward. Right now we’re running $50 off any repair over $250, a free second opinion on any written estimate you’ve already been given, and an $89 seasonal tune-up. Senior and veteran households get 5% off, always.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Summerlin
These are the four jobs that come up most on the decorative iron and aluminum gates around Summerlin. Each one gets a real look at the post and footing before we commit to a plan.
Hinge Replacement in Summerlin
Most of the hinge failures we see in Summerlin aren’t really hinge failures – they’re a hinge doing the work a sagging post should be doing. We replace the hinge only when the hinge is at fault, and we measure the gate panel’s swing and weight first so the replacement matches the load. On west-facing decorative iron gates, we also check for finish wear at the hinge point, since the afternoon sun has usually done some damage there.

Post Replacement in Summerlin
When a hinge post was set too shallow for the panel’s weight, no amount of hinge or latch tuning will fix the sag. On Summerlin’s master-planned lots, posts were often set with the builder’s assumption of a lighter manual gate, not the operator someone added later. We pull the post, set it to the right depth for the panel, and re-hang the gate so the swing is true before any operator goes back on. This is usually the difference between a fix that lasts and one that doesn’t.

Rail Repair in Summerlin
Windblown dust and sun exposure take a toll on the top and bottom rails of ornamental gates – the metal holds, but welds at the rail junctions crack under the repeated stress of a heavy gate swinging in the wind. We weld and re-fit the rail to restore the gate’s structure. On gates where repainting to the HOA’s approved iron finish is required, we coordinate the repair so it doesn’t have to be stripped twice.

Custom Welding in Summerlin
When a gate needs a section replaced, a bracket added, or a match to the community’s approved style, custom welding keeps the repair invisible from the street. This matters in Summerlin’s HOA villages, where a mismatched patch job gets flagged. We match the gauge and profile of the existing metal so the repair conforms and reads correctly alongside neighboring gates on the same street.
Trusted Brands We Service in Summerlin
We’re trained and equipped on nine gate-automation brands, so the correct fix is made on the first visit whatever is on your driveway. In Summerlin, that most often means LiftMaster arms on the newer village installs and FAAC on older estate gates, with Mighty Mule showing up on DIY retrofits where no conduit was ever run. We don’t stock parts, so we don’t claim to. What we do is source the right part for your specific operator and gate, usually within a single scheduled visit.
Common Gate Parts & Welding Problems We See in Summerlin Homes
The patterns repeat. Here’s what rises to the top on Summerlin’s housing stock.
- West-facing gates seizing faster than east-facing ones. On the same Summerlin street, a west-facing gate takes the full afternoon sun and its hinges, finish, and operator housing wear measurably faster than a neighbor’s east-facing gate. A part that works for one may not hold up two doors down.
- Builder-grade operators bolted onto manual gates. Many Summerlin installations began as manual gates, then got an operator added without correcting the post footing or reinforcing the panel. The operator strains, stops partway, and the homeowner replaces the motor when the real problem is the gate.
- No conduit run planned at build. Plenty of these gates have no power where the operator needs it. That’s often solved with a solar gate opener rather than a trench, and getting the choice right the first time saves a second visit.
- HOA finish and style mismatches. In Summerlin’s master-planned HOA villages, a repair must match the community’s approved iron finish and style. An off-the-shelf hinge or patch in the wrong finish can be non-compliant even when the work is solid.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Summerlin, NV
Here’s what the work typically runs in Summerlin’s market, so you can plan before you call.
- A typical hinge replacement in Summerlin runs $180-$340, depending on the number of hinges and finish matching.
- A typical post replacement runs $450-$900, driven by footing depth and whether the gate must be re-hung.
- Typical rail repair and weld work runs $220-$520, depending on how much structural metal needs replacing.
- Custom welding with finish matching usually lands $300-$750, since matching the HOA’s approved iron finish adds a step.
Your actual price is quoted and agreed before any work starts. No surprises on the bill. If you’ve already got a written estimate from someone else, we’ll give you a free second opinion on it. Call (888) 276-7609 for an exact quote – estimates are free.
We Also Serve Cities Near Summerlin
The same crew that works Summerlin also covers Spring Valley, Las Vegas, Winchester, and Paradise. You can see the full scope of our Gate Parts & Welding work, or read more about Gate Parts & Welding in Summerlin for the local detail. Wherever you are in the valley, the process is the same: look at the metal, quote the number, and guarantee the work in writing.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Summerlin
These are the questions we hear most from Summerlin homeowners. Here are the straight answers.
Because the motor usually isn’t the problem. On Summerlin’s housing stock, the operator is often bolted onto a gate that was never designed for automation, or onto a hinge post set too shallow for the panel’s weight – so a new motor works against the same sag and strains just as hard. A qualified pro checks the post footing and sag correction first, then re-tunes or replaces the operator arm once the gate itself swings true. Call (888) 276-7609 for a free estimate before you buy another motor.
Yes, automation can be added to a manual gate, but it needs to be planned around the gate and the lot, not just bolted on. In Summerlin, the two things that drive the choice are the hinge post condition and whether any power or conduit run exists – and often it doesn’t. A solar gate opener frequently solves the power problem where trenching a conduit run isn’t practical. We’ll measure the gate and quote a written price before anything is ordered.
Most likely yes, though the exact rule varies by Summerlin village. Summerlin’s master-planned HOA communities commonly require that repairs match the community’s approved iron finish and style, which is why an off-the-shelf hinge or patch in the wrong finish can be non-compliant even when the work holds up. We match gauge and finish to the existing gate and to the village standard, so the repair reads correctly from the street. Call us for a free second opinion on any estimate that doesn’t address finish matching.
Because your gate takes the full afternoon sun and theirs doesn’t. On the same Summerlin street, a west-facing decorative wrought-iron gate fades, warps, and seizes faster than an east-facing one under the desert heat, low humidity, and windblown dust. It’s a real difference in wear rate, not a theory. When we quote a hinge or weld repair, we account for that exposure so the fix holds through the next summer. Call (888) 276-7609 for an exact quote.
Yes – safety photocells and reversing edges on an automatic gate are a legal and safety requirement, and they should never be bypassed or removed during a repair. A functioning photocell is what stops a gate from closing on a person or vehicle. We confirm the safety edge and photocell are working before any operator goes back into service. If yours has been bypassed or has failed, don’t wait – call us and have it checked. Estimates are free.
Get Your Gate Repaired in Summerlin
If your gate drags, seizes, or stops partway through the afternoon, the diagnosis is worth more than a patch. Call Ironworks Gate Co. at (888) 276-7609 for a free estimate in Summerlin. Upfront pricing agreed before work starts, background-checked and uniformed technicians, and every job backed in writing by our 90-Day Done Right Promise. We answer the phone 24 hours a day, 7 days a week.
Written by the team at Ironworks Gate Co.