Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your driveway gate is stuck halfway open in Green Valley or the opener on your courtyard gate has gone quiet in Seven Hills, you’re in the right place. Ironworks Gate Co. Boulder City services gate motors and openers throughout Henderson, and we know this city’s neighborhoods from Anthem to MacDonald Ranch. Most motor repairs are finished in a single visit, with the price quoted and agreed before a single bolt is turned. Call (888) 276-7609 and a live person answers, day or night.
Why Ironworks Gate Co. Boulder City Is Henderson’s Preferred Gate Motor & Opener Company
Henderson homeowners call us back because we treat their gate like a piece of machinery worth fixing, not a sales lead. Our technicians have up to 13 years of experience, and they’re trained on nine gate-automation brands, so whatever is bolted to your driveway, the correct fix happens on the first visit. We’re background-checked and uniformed, and we work in your yard the way we’d work in our own mother’s. Every completed job is protected by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No arguing, no paperwork chase. We’ll be there when we say we will, and the price you agree to is the price on the bill.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson
From the guard-gated communities off Eastern Avenue to the age-restricted homes in Sun City Anthem, our Gate Motor & Opener work covers the full scope: installation, repair, battery backup, and everything between the motor and the keypad. Here’s where Henderson homeowners call us most.
Motor Installation in Henderson
In Henderson’s newer master-planned communities, adding automation to a manual gate is bigger than swapping a motor. Many of these homes were built without a dedicated power run or conduit to the gate, so installation often means trenching new electrical service and setting a proper post footing for the operator. We measure, quote, and schedule the work in writing before anything is ordered.

Motor Repair in Henderson
Desert heat is hard on operators. A builder-grade LiftMaster or Linear motor that’s overheated in a 100°F+ summer is one of the most common calls we get, and it usually leaves the swing gate stuck halfway open. We diagnose the actual failure, replace what’s worn, and confirm the safety photocells are working before we leave.

Linear Motor Service in Henderson
Linear operators are everywhere in Henderson’s 1990s and 2000s subdivisions, and they’re good machines when they’re maintained. When one stalls or loses its limits, we get it running again or replace it with a properly sized unit. Either way, you’ll know the number before we start.

Slide Motor Work in Henderson
Sliding gates need a level track and a motor sized for the weight they carry. In Henderson, dust and the occasional monsoon gust can clog tracks and rack a frame enough to strain the operator. We check the hardware, clear the track, and make sure the motor is matched to the gate it’s moving.
Trusted Brands We Service in Henderson
We’re trained and equipped to service nine major gate-automation brands, including LiftMaster, Linear, DoorKing, Elite, Mighty Mule, FAAC, BFT, Viking, and Ghost Controls. We don’t stock parts, and we won’t tell you we do. What we do is identify the correct replacement, order it, and come back with the right part in hand instead of a guess. Most repairs finish in one visit; when a part has to be ordered, we tell you exactly what it is and when to expect us.
Common Gate Motor & Opener Problems We See in Henderson Homes
- Builder-grade operators overheating. In Green Valley and Anthem, the original motors were often sized for lighter use and installed without shade or ventilation. In 100°F+ summers, they fail ahead of schedule, and the gate freezes wherever it happened to be.
- No power or conduit at the gate. When a homeowner wants to automate a manual gate, the missing electrical run is the real cost. Trenching new service to the gate post is common in these subdivisions, and it should be planned, not improvised.
- HOA design-review requirements. In communities like Green Valley, Anthem, and MacDonald Ranch, replacement operators and hardware must match design-approved styles and finishes. That means matching finishes and paperwork, not an off-the-shelf swap.
- Faded paint and dried-out hardware from the sun. UV and low humidity bake the finish and dry out seals and hinges. We see faded powder coat and heat-stressed operators all over Henderson’s stucco-and-tile subdivisions.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor & Opener in Henderson, NV
A typical motor repair in Henderson runs $180 to $340, and a battery-backup setup usually lands between $550 and $1,100 installed. Full motor installation with a new power run and post footing is a bigger job: expect $2,400 to $5,500 depending on trench length, gate weight, and whether your HOA requires a specific finish. What moves the number most is the electrical run, the operator brand, and the gate’s condition. Every price is quoted and agreed in writing before work begins, so an invoice bigger than the quote isn’t something you’ll see from us. Ask about $50 off any repair over $250 and our free second opinion on any written estimate.
We Also Serve Cities Near Henderson
We work throughout the southeast valley, including Henderson, Boulder City, Whitney, Paradise, and Enterprise. If you’re just over the line in Whitney or out toward Boulder City, the quote process is the same: we measure, we price in writing, and we schedule the work. Call to set up a visit.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson
Yes, usually, and the driveway itself is rarely the problem. The bigger issue is that many homes built in Henderson’s master-planned subdivisions never got a dedicated power run or conduit to the gate, so the job means trenching new electrical service, setting a proper post footing for the operator, and sizing the motor to the gate. We plan that layout carefully to keep disruption to a minimum. Call (888) 276-7609 for a free measure and a written price.
Because Henderson’s desert sun is genuinely harder on them than most climates. Builder-grade operators in newer developments were often sized for lighter use and installed without shade or ventilation, so 100°F+ summers push them past their limits, UV bakes the finish, and dust clogs tracks and photo-eye sensors. A correctly sized, properly maintained operator lasts far longer. Call us for an $89 Seasonal Tune-Up to get ahead of it.
Often, yes. In Henderson’s HOA-governed communities, replacement operators and hardware generally need to match design-review-approved styles, colors, and finishes, so a generic off-the-shelf motor may not pass. We know what those review packets usually ask for and can supply the finish details your board needs. Call for a free second opinion on any written estimate.
Automatic gates need UL 325 entrapment protection, which means working safety photocells or loop detectors. After years of Henderson sun and dust, those sensors are often misaligned or dead, and that’s a real hazard. We test and align them on every job, and we won’t leave a gate running without them. Call (888) 276-7609 to have yours checked.
Yes, a properly installed battery backup lets the operator run the gate when the power is out, which matters most for older residents in Sun City Anthem and Sun City MacDonald Ranch who can’t lift a failed swing gate by hand. We size the battery to the operator and test it before we leave. Estimates are free; call (888) 276-7609.
Get Your Gate Working Again
Whether your operator has quit in Anthem or you want a manual gate automated in Seven Hills, call Ironworks Gate Co. Boulder City at (888) 276-7609 for a free estimate. A live person answers 24 hours a day, 7 days a week, and every job is backed by our written 90-Day Done Right Promise. Senior and veteran homeowners get 5% off, always.
Written by the team at Ironworks Gate Co.