A Ironworks company - serving Boulder City, NV

Mighty Mule Hinge & Roller Replacement in Boulder City, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Hinge & Roller Replacement: The Boulder City Owner’s Guide

We replace Mighty Mule gate hinges and rollers with model-matched parts, and most Boulder City jobs run $180 to $420 installed depending on the gate style and how much hardware has seized. We keep same-day slots open for jammed or dragging gates, and every job is quoted and agreed in writing before we touch a bolt.

Call (888) 276-7609

Owners usually find the problem the same way. The gate starts to sag at the latch and the pin no longer drops clean. Or you push it open and hear a grind at the hinge knuckle, or the roller skips off the track and the gate digs into the driveway slab. In Boulder City’s dry heat, the factory grease in Mighty Mule hinge pins cooks out faster than most people expect, and once the pin runs dry it wears the bore instead of the pin. Some owners notice a bright stripe of bare metal on the track, a sign the roller bearing has locked and is sliding instead of rolling. We’ve seen this on older gates on Nevada Way and around the Lakeview neighborhood, and it’s almost always the roller, not the whole gate arm.

Which Mighty Mule Models This Applies To

Mighty Mule sells hinge and roller hardware across its swing and slide lines, and the parts are not interchangeable between them. The swing-gate hinge sets for the Mighty Mule 350, 360, and 500 series are the most common we see in Boulder City. The slide gates and the heavier dual-gate brackets use a different post bracket and roller wheel. If you can’t find a model sticker, look for it on the control box lid or the underside of the opener arm, then measure the hinge pin diameter and the gap between post and gate frame before you order anything.

The OEM-versus-aftermarket call matters more on Mighty Mule than on premium brands. Mighty Mule’s original hinge pins are a softer steel than what’s on a LiftMaster or DoorKing gate, and a quality aftermarket pin in a harder grade often outlasts the original. The trade-off is a small risk of a slightly different bore size. That’s why we match the part to the measured pin rather than to the model name alone. If you own a Ghost Controls or DoorKing gate instead, tell us on the call and we will bring the right hardware for that brand too.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Mighty Mule Hinge & Roller Replacement Is Failing

  • Latch won’t line up. A hinge pin worn past a few thousandths of an inch lets the gate drop at the free end. The opener then fights the misalignment, and the latch strike misses.
  • Grinding or squealing at the hinge. The grease has dried and the pin is riding on bare metal. Left alone, it wears the hinge barrel and you’re replacing the whole bracket instead of a pin.
  • Roller skips or drags on the track. The roller bearing has seized, so the wheel slides instead of rolls. You’ll see a flat spot on the wheel or a shiny streak on the track.
  • Gate sags when you push it open by hand. Could be a hinge, a roller, or a tired post, and the fix is different for each. We check all three before quoting.
  • Opener strains or reverses on the first foot of travel. A binding hinge or roller loads the motor, and the unit senses the resistance and reverses. That’s often logged as a fault when the real problem is the hardware, not the operator.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed hinge and roller replacement in Boulder City runs like this:

Job Typical installed range
Single hinge pin replacement (one hinge) $180 – $240
Full hinge set, one gate leaf $260 – $360
Roller wheel or track roller replacement $200 – $300
Hinge set plus rollers, one leaf $340 – $420
Post bracket repair or re-weld $250 – $450

Price includes the part, the labor, and a check that the gate swings and latches clean when we’re done. The range moves on gate weight, how rusted the old hardware is, and whether the post bracket needs re-welding. It is settled with you before we start, so the bill you get is the number you agreed to. Every job is covered by our 90-Day Done Right Promise: if it isn’t right, we come back and make it right, in writing.

DIY or Call Us?

You can safely check a few things yourself. Push the gate open by hand and feel for binding. Look for a worn pin, a flat spot on a roller, or a bright stripe on the track. Grease a dry hinge and see if the grind goes away. What we’d steer you away from is pulling a seized hinge pin on a loaded gate, or cutting and re-welding a post bracket. A gate under spring or motor tension can swing or drop the moment a hinge lets go, and a dropped gate on a driveway is a real injury risk. We’re trained on Mighty Mule and eight other brands, and most of these jobs are done in a single visit. If yours is jammed or dragging, call us at (888) 276-7609 and we’ll get it on the schedule.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Ironworks Gate Co. Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch