A Ironworks company - serving Boulder City, NV

Mighty Mule Gate Motor & Opener in Boulder City, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Gate Motor & Opener in Boulder City: What to Know First

We repair, replace, and service Mighty Mule gate motors and openers throughout Boulder City, and most jobs involve a single visit once the correct part is on hand. Typical repairs run $210 to $480 depending on the series and what failed; full operator replacements land higher, and we quote and agree the price before any work starts. As an independent Mighty Mule service provider, we’re not affiliated with or authorized by the manufacturer, but our technicians are trained on the brand and the parts.

Call (888) 276-7609

This page is for the homeowner with a Mighty Mule gate on the driveway and something wrong with it. Call (888) 276-7609 and a live person will answer, day or night.

How Mighty Mule Products Fail – and How We Fix Them

Mighty Mule builds a solid, accessible operator, and the failures we see repeatedly in Boulder City trace to the brand’s own design choices rather than abuse. Here’s what actually breaks on the brand, and what our technicians do about it.

  • Mighty Mule 350 and 360 swing operators: control board failures after monsoon-season surges. The single-board design on these older swing models is vulnerable to a close lightning strike on the neighborhood grid, and the board cooks before the surge strip has a chance to do anything. We test the board in place, confirm the failure with a meter, and swap it rather than selling a whole new operator when the motor and gearbox are sound.
  • Mighty Mule MM571 and MM572: battery and solar-charging cuts at the first hard freeze. These rely on a charged 12V battery to move the gate, and when the panel gets shaded or the battery ages out, the gate goes dead in cold weather first. We check battery voltage, charging output, and panel angle instead of replacing the battery every autumn.
  • Mighty Mule 500 and 502: stripped gear in the actuator arm. The plastic and light-metal gear sets wear faster on heavy or dragging gates, and you’ll hear it grinding before it fails entirely. We replace the actuator rather than the whole unit, and we fix the gate drag that caused it, which is where the real wear started.
  • Mighty Mule MMS100 and slide operators: track and limit-switch drift. A slide gate needs a clean, level track, and when the track shifts on a Boulder City pad that’s settled, the limits drift and the gate stops short or keeps running into the stop. We reset the limits, adjust the track, and re-verify the safety edges on every visit.
  • The openers themselves on older Mighty Mule installs: the “beep but no move” fault. That symptom is almost always a keypad or intercom signal reaching a board that’s no longer recognizing the command, not a dead motor. We trace the access-control side before condemning the operator, which saves the cost of a motor you didn’t need.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Mighty Mule Gate Motor & Opener Process

Every Mighty Mule job follows the same path from your call to a clean driveway.

  1. 1
    Call and diagnose. You describe what the gate is doing, we ask the right questions, and we book a visit. Live person, every time.
  2. 2
    On-site inspection. We test the board, motor, battery, limits, and charging system, and check the gate itself for drag, sag, or a track that’s moved. A motor that fails twice usually has a gate problem underneath it.
  3. 3
    Parts decision, explained. We tell you plainly where an OEM Mighty Mule part is the right call and where a quality aftermarket equivalent is a better value, and we never use a part that voids a warranty you still have.
  4. 4
    Upfront price. You get a written price before we touch a bolt, and that’s the number on the bill.
  5. 5
    The repair, done right. Single visit in most cases, with the gate tested open and closed, safety edges checked, and the site cleaned before we leave.
  6. 6
    The 90-Day Done Right Promise. Written, no arguing. If it’s not right, we come back and make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Mighty Mule Gate Motor & Opener Costs in Boulder City

Prices below are typical for Mighty Mule work in Boulder City. Every quote is free, and the price is agreed before work starts.

Job Typical range
Diagnostic visit (credited toward the repair) $89
Control board replacement (350, 360) $280 – $420
Battery and solar-charging repair (MM571, MM572) $210 – $340
Actuator arm replacement (500, 502) $320 – $480
Slide operator tune-up and limit reset (MMS100) $180 – $290
Full Mighty Mule operator replacement $850 – $1,600

What moves the number: series and part, whether the gate itself needs adjustment, and access to the operator. Call (888) 276-7609 for a free estimate and a firm price.

Why Boulder City Homeowners Call Ironworks Gate Co. Boulder City for Mighty Mule Work

We’ve spent more than four decades working on gates in this town, and we’ve watched enough Mighty Mule installs to know their habits. A live person answers the phone 24 hours a day, every day, and our technicians are background-checked and uniformed on every job. We’re trained on nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so whatever’s on your driveway, we already know it. Most jobs finish in one visit, and every one is covered by the 90-Day Done Right Promise in writing. We handle the whole scope, from a Mighty Mule repair to a keypad, intercom, or a fresh install.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Ironworks Gate Co. Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch