A Ironworks company - serving Boulder City, NV

LiftMaster Keypad & Intercom Repair in Boulder City, NV

LiftMaster operatorsLiftMaster operators
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

LiftMaster Keypad & Intercom Repair: The Boulder City Owner’s Guide

LiftMaster-compatible keypad and intercom repairs in Boulder City typically run $265 to $640 installed, depending on whether we’re replacing a standalone wired keypad or a full intercom-and-keypad station with new wiring, and most of that work is finished in a single visit. You’ll know the part has gone when the gate stops answering, the keypad beeps but the arm never moves, or the intercom goes silent at the house but the gate still opens from your remote. We service the LiftMaster line every week here, so we can usually tell from the model number and a few questions which part a Boulder City driveway is actually failing on before we arrive. The company that handles LiftMaster in Boulder City and surrounding areas is Ironworks Gate Co.

Call (888) 276-7609

Which LiftMaster Models This Applies To

Keypad and intercom problems show up across the LiftMaster residential and light-commercial door and gate lines – the 8500 and 8500W wall-mount openers common on Boulder City estate gates, the CSL24U and CSL24V slide-gate operators, the LA400 and LA500 swing operators, and the LA412 line. LiftMaster makes keypads for these in two types: wireless, which pairs to the operator by radio, and wired, which runs a low-voltage cable from the keypad down to the gate controller.

The right part depends on what you have, so we ask before we order. The most reliable identifier is the model number stamped on the operator housing or the label inside the control box – not the keypad itself, which is often a replacement already. If that label is worn, the tag on the gate panel or the manual in a kitchen drawer will do it. LiftMaster’s wireless keypads cap how many clicker remotes and keypads can pair to one operator, and hitting that cap is a common false alarm in Boulder City, where a two-gate property may already have four remotes and two keypads in the pairing list. On the wired side, the gotcha is voltage and wire gauge: a keypad designed for one control voltage won’t work reliably on another, and undersized wire run the long distance from walkway to gate will cause the flashing beeps and dead reads that look like a failed keypad.

On the OEM-versus-aftermarket question, our honest answer is that for LiftMaster keypads and intercom accessories, the OEM part is the safer choice. Aftermarket equivalents exist and some are decent, but the radio signature, the pinout, and the weather sealing on LiftMaster’s own keypads match the operator, and we’ve seen too many aftermarket pads fail in a Boulder City summer after a single season. If your budget pushes for the aftermarket version, we’ll tell you plainly which ones have held up for us and which haven’t.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your LiftMaster Keypad & Intercom Repair Is Failing

  • The keypad beeps but the gate doesn’t move. Usually a pairing or radio-reception fault, not a dead keypad – the pad is hearing you, but the operator is not accepting the code. Re-pairing or replacing the radio receiver module fixes most of these.
  • The keypad is completely silent. Often a lost power feed rather than a bad pad. On wired units, a corroded splice or a blown low-voltage fuse at the controller is the culprit more often than the keypad itself.
  • The intercom crackles or cuts out. Cables and connectors at the gate pedestal take the weather in Boulder City, and a cracked seal lets in the desert dust and the rare rain that finds its way in. Cleaned and re-sealed connections bring many of them back.
  • The intercom only works when it wants to. Intermittent operation points at a loose common wire or a failing power supply on the gate controller. Gremlins in this line usually trace back to one loose screw.
  • The keypad code works but not consistently. A code that fades in and out over months is often the keypad’s memory or the operator’s receiver losing its pairing, and it’s worth a fresh pairing before you buy a new part.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what a fair scope looks like on a Boulder City gate, with prices we settle upfront, before a single screwdriver touches the gate:

  • Wireless LiftMaster-compatible keypad replacement, paired and tested: $185 – $295.
  • Wired LiftMaster-compatible keypad replacement, reusing existing cable: $265 – $390.
  • Intercom station replacement (unit and wiring harness): $340 – $560.
  • New low-voltage wire run to the keypad or intercom: $120 – $260, depending on run length and terrain.
  • Receiver module or pairing repair only: $145 – $240.

The parts we source are matched to your LiftMaster model, and labor includes the removal of the old part, the install, re-pairing to the operator, and a full open-and-close test of the gate before we leave. On our 90-Day Done Right Promise, if the keypad or intercom fails or acts up within three months of our visit, we come back and make it right, no paperwork and no arguing. We’re not the cheapest quote you’ll get on a LiftMaster keypad in Boulder City – we’re the one that stays fixed. Call (888) 276-7609 for a free estimate.

DIY or Call Us?

There are a few things you can safely check yourself before calling. Make sure the keypad has power (a fresh battery on a wireless unit is the easiest test). Try your remote to confirm the gate operator itself is healthy. On a wired keypad, check whether the small fuse at the gate controller is intact. Re-pairing a wireless keypad to the LiftMaster operator is something many owners can do with the manual in hand.

Where DIY goes wrong is on the electrical side and the gate side. The keypad and intercom wiring runs at low voltage, but the run travels down the gate pedestal where it shares space with the 120-volt circuit feeding the operator – and homeowners who open that control box without knowing what they’re looking at have gotten hurt. If the problem is a bad wire run, a shorted splice, or a receiver that needs to be swapped at the operator, that’s a job for a technician. And if the gate is a heavy estate slide or swing operator, any work on the control box without the gate locked in the open position is unsafe. That’s the point at which you pick up the phone and call (888) 276-7609 – we can usually schedule you for the same visit.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Ironworks Gate Co. Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch