A Ironworks company - serving Boulder City, NV

Ghost Controls Welding & Fabrication in Boulder City, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Welding & Fabrication: The Boulder City Owner’s Guide

We repair and fabricate the welded steel that holds a Ghost Controls gate arm, bracket and post together, and in Boulder City most of that work runs $260 to $780 installed depending on whether it’s a cracked mount bracket, a fatigued arm weld or a failing hinge weld on the gate leaf itself. We quote the price before we touch the metal. Most bracket and weld repairs are handled on the first visit. You usually find out something is wrong the same way everyone does: the gate starts dragging, the operator strains, the arm shudders on the way open, or you walk out and see a crack in the bracket or a weld that’s given up. Sometimes the arm just quits because the steel behind it loosened.

Call (888) 276-7609

Which Ghost Controls Models This Applies To

The welding and fabrication side of a Ghost Controls system is less about the control board and more about what the arm is bolted to. Ghost Controls sells arms in the TSS1, TDS2, TDS2L and DTP1 families along with posts, brackets and mounting hardware, and those arms push hundreds of pounds of force into the bracket and post over and over, season after season. A single-piece heavy-duty steel bracket welded to a post behaves differently than a bolted-on plate. When we look at a Boulder City gate, we check the bracket style, the bolt pattern, the post thickness and the way the arm body is joined at the clevis before we order or fabricate anything. A part that looks interchangeable isn’t always: an arm built for a lighter gate has a shorter bracket footprint, and fitting it to a heavier iron leaf is how you end up back where you started. Where a factory bracket is available we source it. Where the gate calls for something the factory doesn’t make, we fabricate to the measurements. We’re an independent service provider and not affiliated with Ghost Controls.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Welding & Fabrication Is Failing

The steel around a Ghost Controls arm tells you what’s wrong before the motor does. These are the symptoms that show up most on Boulder City gates.

  • The arm shudders or jerks on the way open. That’s usually a bracket that’s worked loose or a clevis weld starting to fail, not a motor problem. The arm is fighting the mount.
  • You see rust streaks or a hairline crack at the bracket or post weld. Desert heat and dry air don’t stop rust; they just slow it. Once water gets into a weld seam, the crack widens every cycle.
  • The gate sags and drags near the ground. A failing gate-leaf hinge weld drops the leaf, and the operator has to lift the whole weight. That extra load is what cracks mounts.
  • The arm pulls free or the bracket moves when the gate reverses. The mount is failing under load. Keep running it and you’ll damage the gearbox next.
  • The operator shuts off mid-travel and won’t re-arm. A loose bracket lets the arm shift, the limit or obstruction sensing trips, and the gate stops. The control board is often fine.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Welding and fabrication repair on a Ghost Controls gate in Boulder City generally falls into these ranges. Every price is quoted and agreed before any work starts, so the number you hear is the number on the bill.

  • Bracket weld repair or reinforcement: roughly $260 to $420
  • Cracked mount repair with re-fabrication: roughly $340 to $560
  • Full bracket or mount replacement, parts plus labor: roughly $420 to $780
  • Gate-leaf hinge weld repair: roughly $300 to $550

Those ranges move with post condition, how much old weld has to be ground out, and whether the mount needs to be fabricated from scratch. Parts and labor are quoted as one clear number, and the finished work carries our written 90-Day Done Right Promise. If something we welded or fitted isn’t right, we come back and make it right.

DIY or Call Us?

Some of this you can check safely. You can look for rust streaks, a visible crack at a weld or bracket, a wobbly mount, or a gate that sags with the operator switched off. Tightening a loose bracket bolt is within reach for most owners. What we’d steer you away from is welding live, loaded gate steel yourself. Grinding out an old weld and laying new weld on a bracket that holds a spring-loaded gate or an energized arm is where people get hurt and where a weak weld fails again in a month. We’d rather you call than take that on. Call (888) 276-7609 and a live person answers, day or night, with a free second opinion if you already have a written estimate.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Ironworks Gate Co. Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch