Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Parts & Welding in Boulder City: What to Know First
We repair Ghost Controls gate openers and the gate hardware they attach to in Boulder City, and most hinge, post, roller and weld jobs are finished in a single visit. Ghost Controls has no local dealer network, so there is no one to call for a replacement arm bracket or a cracked post hinge at 4pm on a Friday, which is exactly where we come in. You get an upfront, written price agreed before any work starts, a free estimate, and the job backed by our written 90-Day Done Right Promise. If your gate has stopped swinging true, call our team at (888) 276-7609 and a live person will answer.
This page is for the homeowner who already owns a Ghost Controls opener and needs the gate itself repaired or rebuilt: the metal, the welding, the hinges, the posts, the rollers, the latch. It is also a page for the homeowner who cannot tell whether the fault sits in the opener or in the gate structure. If you want a quick read on our position: we provide independent Ghost Controls gate parts & welding in Boulder City as an independent Ghost Controls service provider, and we are not affiliated with or authorized by Ghost Controls or its parent company.
Key Takeaways
- We repair the gate structure and hardware that Ghost Controls operators are mounted on: hinges, posts, rails, rollers, latches and custom weld work.
- Most hinge, roller, latch and post repairs are done in one visit.
- We are trained and equipped on nine gate-automation brands, including Ghost Controls, LiftMaster and Mighty Mule, so the diagnosis is the same whether the opener is a Ghost Controls or not.
- Every completed job carries our written 90-Day Done Right Promise.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls operators are a good fit for a residential driveway gate in Boulder City, but they put unusual loads on the gate itself, and a lot of what looks like an opener problem is a metal problem. Here are the failure patterns we see most often, and what we do about them.
- Post hinge sag on the TSS1 and TSS2 single-swing kits. These kits are widely installed on the same hollow steel posts that have been standing in Boulder City for decades. The post is often sound at the top and soft at the hinge plate where water collects. We sound the post, then either rebuild the hinge mounting with a welded plate or replace the post entirely. If a sagging hinge is left alone, the opener arm ends up dragging the gate into the ground.
- Rebound or “bounce back” on the TS1000 and similar single-swing arms. A gate that closes and then reverses slightly usually has a latch or hinge that no longer lets the gate swing freely. The operator is doing its job and being blamed for the hinge. On our visit we check hinge swing effort, latch alignment and roller wear before touching the opener. A worn roller or a misaligned latch gets corrected, which often solves the symptom without any opener parts.
- Arm bracket fatigue and weld cracking on the newer AXO and heavy-arm series. Heavier operators load the gate frame harder. Where the original installer welded the arm bracket to the frame, we see hairline cracks at the weld toe, often hidden under paint. We strip, ground, and re-weld with full penetration rather than putting a bead over the crack. A crack ignored here means the bracket peels off and the arm twists out of alignment.
- Rail twist and frame distortion on older wooden or light steel gates. Ghost Controls arms are matched to a specific gate weight and width, and a gate that has warped or gained weight over the years pushes past that limit. We look at split rails, dipped frames and twisted stiles, then straighten or rebuild with welded reinforcement so the operator works within the load it was rated for. This is a metal repair, not an opener repair.
- Latch and roller wear from Boulder City dust and gravel driveways. This is a local reality: driveway surfacing around Boulder City and the Historic District throws grit into gate tracks and onto roller surfaces, and a steel roller that runs dry under that grit flattens quickly and transfers the load onto the operator arm. Greasing alone doesn’t fix a flat roller. We replace worn rollers and check the latch plate for alignment at the same time.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Parts & Welding Process
Because we work on the gate rather than the control electronics, our process is built around getting the diagnosis right the first time and then putting it back together so it stays put.
- 1
Phone call and a real conversation. A live person answers every call, 24 hours a day, 7 days a week. Tell us the model, the gate, and what it is doing. That first conversation is where we work out whether this needs a hinge, a post, a weld, or a full gate rebuild.
- 2
On-site inspection. We sound the posts, check the hinges, rollers, latch and rail condition, and test the gate manually while watching the operator arm. This is where Ghost Controls jobs reveal their hidden cause, because the operator is only reacting to the gate.
- 3
Parts decision. We use Ghost Controls OEM parts where they are available and where the fit matters, and quality aftermarket parts where the original part has proven weak. We spell out which is which before you agree to it, and you get an upfront price for either path.
- 4
The repair. Welding, post work, hinge replacement or roller fitting, done with the gate isolated from the operator so nothing is back-driven while it is being repaired.
- 5
The test. After the metal is finished, we run the gate under full operator load, check the swing, check the latch close, and check that the operator isn’t being strained by anything left behind.
- 6
Guarantee and cleanup. Every completed job carries our written 90-Day Done Right Promise. If something isn’t right, we come back. No paperwork, no arguing.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Parts & Welding Costs in Boulder City
Here is an honest look at typical price ranges. These are ranges, not quotes. Your price is settled before a single bolt is turned, and the ranges below do not include the opener electronics, which is a separate repair.
| Job | Typical range |
|---|---|
| Hinge replacement (per hinge, welded) | $180 – $360 |
| Gate roller replacement | $120 – $280 |
| Latch and lock adjustment or replacement | $140 – $320 |
| Rail repair or reinforcement weld | $240 – $520 |
| Post replacement (per post) | $400 – $950 |
| Custom welding, arm bracket or hinge plate rebuild | $280 – $700 |
What moves the price is post condition, gate weight, and how much previous repair has to be undone before we can do it correctly. Corroded or buried posts, and gates that have been welded over more than once, take longer and cost more. That is why we inspect in person and write the price before starting. Estimates are free, and if you already have a written estimate from someone else, we’ll give you a free second opinion on it.
Why Boulder City Homeowners Call Ironworks Gate Co. Boulder City for Ghost Controls Work
Ghost Controls is one of the nine gate-automation brands we are trained and equipped on, alongside LiftMaster, Mighty Mule and DoorKing. That matters because the same hinge, post and weld failures show up across all of them, and a trained eye on nine brands sees the real cause faster than someone who only knows one. Most jobs are completed in a single visit. Our technicians are background-checked, uniformed, and have up to 13 years of experience, and they are guided by our K.E.Y.S. values: Krafted right, Every time, Your home first, Standing behind it. On top of that, a live person answers the phone 24 hours a day, 7 days a week. Standing offers include $50 off any repair over $250, a free second opinion on any written estimate, our $89 seasonal tune-up, and a 5% senior and veteran discount. For a company that makes a 40-year-old gate close like the day it was hung, that is the standard.
FAQs
No. Replacing a hinge, roller, latch or post is a mechanical repair to the gate itself and does not touch the operator electronics or its warranty. If we ever have to replace or service the opener itself, we use Ghost Controls OEM parts or quality aftermarket parts and explain the choice before we start, so you know what is being covered and what is not. Call (888) 276-7609 for an exact quote.
Ghost Controls does not have a local dealer network, so getting parts for a Ghost Controls operator usually means ordering them and waiting, and that can mean a driveway gate sitting open for days. We keep our diagnostics grounded in what’s actually available locally or by quick order, and we use quality aftermarket hardware where the fit and durability are the same or better. Many hinge, roller and latch jobs can be handled with hardware we source directly.
Most hinge, roller, latch and post jobs are completed in a single visit, and we can often schedule quickly. A live person answers our phone 24 hours a day, 7 days a week, so if your gate is hanging open and you need help now, call (888) 276-7609. We’ll tell you honestly on that call what we can do and when.
Repair is almost always the right call when the gate frame is sound and the fault is hinges, rollers, latch or weld work. Replacement makes more sense when the frame is twisted, the posts are failing, or the gate has been repaired repeatedly. Our technicians look at post integrity, frame condition and operator load on site and tell you which way the job is leaning before any work starts. The estimate is free.
It includes on-site diagnosis, the repair itself, a full load test under the operator, and our written 90-Day Done Right Promise. You get an upfront price before a bolt is turned, so there are no surprises on the bill. If you have a written estimate from another shop, we’ll give you a free second opinion on it. Call (888) 276-7609 to get started.
If your Ghost Controls gate has stopped swinging true, the opener may not be the problem at all. Our team at Ironworks Gate Co. Boulder City will tell you straight what is happening to the gate, what it costs, and what we can do about it. Call (888) 276-7609 for a free estimate, and we’ll be there when we say.
Written by the team at Ironworks Gate Co. Boulder City, serving Boulder City and nearby areas.