Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Motor Replacement: The Boulder City Owner’s Guide
We replace Ghost Controls gate motors for Boulder City homeowners at a typical installed price of $520 to $890, with most single-motor swaps completed in a single visit. Your arm, control board, or operator housing is what fails, and the replacement gets mounted, wired, and cycle-tested before we leave. Owners usually find out the hard way: the gate opens halfway and stalls, the arm grinds instead of humming, or the keypad light comes on but nothing moves. On the older single-family drives off Nevada Way and around Wilbur Square, we see plenty of Ghost Controls units that were installed a decade ago and are finally asking for new hardware. When a gate stops mid-cycle in Boulder City, it’s rarely the remote – it’s the motor assembly underneath.
Which Ghost Controls Models This Applies To
Ghost Controls builds primarily in two families: the AXS series (AXS1, AXS2, AXS3, AXS5, AXS10) for single swing gates, and the DTP/DTM dual-gate controllers for two-leaf driveways. Replacement arms and boards are not interchangeable between these lines. The model plate is usually on the underside of the operator housing or inside the control box; the first two letters tell you the series and the arm length is stamped alongside. Measure the arm pin-to-pin before you order anything, because a short arm swapped onto a long gate will overload the gearbox and burn the motor out in months.
On the OEM-versus-aftermarket question: Ghost Controls replacement arms and control boards are sold as factory parts, and the quality aftermarket equivalents we’ve handled in the field are sound when the spec matches, but only when it matches. If your unit is out of production and the factory part isn’t available, we will tell you so directly rather than fit something that “should” work. We are an independent service provider for Boulder City – not affiliated with Ghost Controls – which means we match the correct part to your specific model, not the closest thing on a shelf. The right fitment call on a Boulder City gate saves you a second visit.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Ghost Controls Gate Motor Replacement Is Failing
These five symptoms show up again and again on Ghost Controls units in Boulder City:
- Gate stalls halfway through a cycle. Usually a worn motor brush or a failing control board, not a battery in the remote. If it stalls at the same point every time, the operator is the culprit.
- Arm grinds or clicks instead of a smooth hum. The gearbox or arm bearing has gone. The motor still runs, but the mechanical output is shot and it will chew through the arm before long.
- Gate closes on its own or reverses for no reason. Control board or limit-switch fault. Common in summer heat when the board’s temperature protection kicks in and then sticks.
- Keypad or wall button triggers nothing. Board failure or a dead low-voltage transformer. We test both before pronouncing the motor dead, because sometimes it’s just the transformer.
- Motor runs hot to the touch, or trips a breaker. Winding failure or a shorted armature. Stop using the gate until it’s diagnosed – a failed winding can do real damage to the housing.
Replacement Cost & What’s Included
Installed Ghost Controls gate motor replacement in Boulder City runs from about $520 to $890 for a single-leaf swing gate. The range is driven by the model, whether the arm, board, or complete operator is being replaced, gate weight and travel, and whether the power run needs work. Dual gates cost more because there are two motors and two sets of limits.
Every quote breaks out the part, the labor, and any electrical or mounting correction so you can see exactly what you’re paying for. The price is quoted and agreed before any work starts – no surprises on the bill. Our 90-Day Done Right Promise covers the installation in writing: if it isn’t right, we come back and make it right, no arguing. Most jobs are completed in a single visit by a background-checked technician who carries the K.E.Y.S. discipline onto every driveway in Boulder City.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely clear the gate’s travel path, confirm the circuit breaker, test the battery in the remote, and photograph the model plate. That’s where we’d draw the line. Gate motor replacement involves 120-volt wiring, moving hardware under load, and the control board’s programming – all of it dangerous if you’re not trained, and none of it worth an injury. A swapped arm on a live spring system or a miswired board is how people get hurt, and it’s why we recommend a trained technician every time.
We’ve walked Boulder City owners through dozens of these. When you’re ready, call (888) 276-7609 – a live person answers around the clock, and our free second opinion on any written estimate is standing.
Frequently Asked Questions
Most Ghost Controls operators last 8 to 12 years with regular cycle use, though Boulder City’s summer heat and desert dust shorten that closer to 7-10 years on exposed installations. If yours is over 10 years old and starting to stall, replacement is usually the smarter call than another repair.
Often yes – a control board, limit switch, or arm bearing can be swapped without replacing the whole operator. We diagnose first and will tell you plainly whether a repair or a replacement is the better spend. Call (888) 276-7609 and we’ll give you a straight answer.
A single-motor replacement typically takes 2 to 4 hours on site, and most jobs are finished in one visit. Dual-gate systems take longer because both operators and their limits get aligned together. We schedule around your day, not the other way around.
We match the factory or a quality aftermarket equivalent to your specific Ghost Controls model – no generic substitutes. Because we service nine automation brands (including LiftMaster, Mighty Mule, and DoorKing), we know where fitment goes wrong and we order the right part the first time. Call (888) 276-7609 for a free estimate and part quote.
Call Ironworks Gate Co. Boulder City
If your Ghost Controls gate is stalling, grinding, or simply done, call Ironworks Gate Co. Boulder City at (888) 276-7609 for a free estimate. We’ll match the correct replacement to your model, quote the full installed price up front, and stand behind the work in writing with our 90-Day Done Right Promise. Active offers include $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, our $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. A live person answers around the clock, ready to help you get the gate moving again.
Written by the team at Ironworks Gate Co. Boulder City, serving Boulder City and nearby areas.