Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Hinge & Roller Replacement: The Boulder City Owner’s Guide
We replace failing DoorKing hinges and rollers with DoorKing-compatible parts, and in Boulder City the installed cost typically runs $140 to $320 per hinge-and-roller set depending on series and how much welding or re-alignment the gate needs. Most residential swing-gate jobs are done on a single visit. We’re an independent service provider, not affiliated with DoorKing, and we work on the brand because it’s built well and deserves the right part the first time.
Owners usually find this failure the same way. The gate starts to sag at the latch side, or it drags on the driveway concrete as it swings. You hear a squeal or a grinding creak that wasn’t there last summer. On some models the opener strains or reverses halfway through the cycle because the hinge is binding and the motor can’t overcome the friction. By the time someone calls us, the roller has often worn flat on one side and the hinge pin has wallowed out its bore. That wear doesn’t reverse itself.
Which DoorKing Models This Applies To
DoorKing hinge and roller assemblies show up across the company’s swing-gate lines and the 6000-series and 9000-series slide and swing operators’ gate hardware. The part you need is not universal. DoorKing has used more than one hinge style across its production runs, and the pin diameter, plate thickness and roller profile differ between them. The reliable way to match the right part is to read the label inside the operator housing or on the gate frame, then measure the existing hinge plate and the roller diameter with calipers. Guessing by eye is how wrong parts get ordered.
On the OEM-versus-aftermarket question, our honest position: DoorKing OEM hardware fits correctly and lasts, and we’ll order it when the customer wants it. A quality aftermarket equivalent in the right spec does the same job for less, and on a 20-year-old gate that’s often the sensible call. What we won’t do is force a generic hinge to fit a DoorKing gate frame. It never seats right, and the gate tells you within a season. We also service LiftMaster, Mighty Mule and Ghost Controls hardware, but a DoorKing gate should get DoorKing-spec parts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your DoorKing Hinge & Roller Replacement Is Failing
- The gate sags at the latch side. A worn hinge pin or a roller that’s lost its shape lets the gate drop out of square. The latch stops lining up and the gate won’t self-close cleanly.
- The gate drags or scrapes the ground. A flattened roller or a hinge that’s seized changes the swing arc. You’ll see scrape marks on the concrete and hear the gate grind through its cycle.
- Squealing or creaking on every swing. That noise is metal-on-metal. The bearing surface inside the hinge or roller has worn past the point where grease helps, and continuing to run it accelerates the wear.
- The opener strains or reverses mid-cycle. A binding hinge adds resistance the motor reads as an obstruction, so it backs off. That’s often mistaken for an opener fault when the hardware is the real cause.
- Visible rust or a cracked hinge plate at the weld. Boulder City’s dry climate slows corrosion but doesn’t stop it, and a cracked weld at the hinge mount is a structural issue that needs attention before the gate drops.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for a DoorKing hinge and roller set in Boulder City generally falls between $140 and $320, and the range is driven by three things: which DoorKing series you have, whether the gate needs re-welding or re-alignment at the hinge mount, and whether we’re replacing one set or all of them while we’re there. Parts and labor are quoted separately and plainly, so you see what the hardware costs and what the work costs.
The installed price covers removal of the old hardware, fitting and alignment of the new hinge and roller, a swing test through the full cycle, and a check that the opener still reads the gate correctly. Every job carries our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no arguing. There’s a standing $50 off any repair over $250, and seniors and veterans get 5% off, always. You’ll get the price settled before a single bolt is turned, so there are no surprises on the bill.
DIY or Call Us?
There’s a safe middle ground here. An owner can check the obvious: watch the gate through a full open and close cycle, look for sag at the latch, feel for play in the hinge, and note where it scrapes. That diagnosis helps. Where DIY goes wrong is at the swap itself. A swing gate under load can shift and pinch when a hinge is unbolted, and a heavy gate that comes off its mount is a genuine injury risk. If your gate is welded at the hinge, that’s fabrication work, not a homeowner fix.
Our technicians have up to 13 years of experience with this hardware, we’re trained on nine gate-automation brands, and a live person answers the phone 24 hours a day, seven days a week. Call (888) 276-7609 and we’ll get your DoorKing gate swinging right again.
FAQs
Most DoorKing hinge and roller sets hold up for 10 to 15 years under normal residential use, and often longer in Boulder City’s dry climate than in wetter regions. Gates that see heavy daily cycling, or that went years without lubrication, tend to fail toward the shorter end of that range.
Sometimes, yes. A hinge that’s only loose can sometimes be re-pinned and re-greased, and a roller with surface wear can occasionally be dressed. But once a hinge pin has wallowed out its bore or a roller has gone out of round, replacement is the honest fix. We’ll tell you which situation you’re in rather than sell you parts you don’t need.
A single hinge and roller set on a residential swing gate usually takes about an hour to 90 minutes, including alignment and a full swing test. Jobs that require re-welding or work on multiple sets run longer, and we’ll give you a realistic window before we start.
We match the part to your DoorKing series and the measured hinge and roller specs, not to a guess. We order the OEM part or a quality aftermarket equivalent in the correct spec, confirm it against your gate before installation, and if the fit isn’t right we handle the return. Call (888) 276-7609 for a free estimate.
Written by the team at Ironworks Gate Co. Boulder City, serving Boulder City and nearby areas.