Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterGate Realignment in Boulder City, NV
Gate realignment in Boulder City costs between $150 and $400 for most driveway gates, and the job is usually finished in a single visit. Realignment adjusts a gate that has sagged, twisted, dropped at the latch, or started dragging on the ground so it swings and closes squarely again. We handle this at Ironworks Gate Co. as a focused part of our Gate Repair work, and we do it the way a gate should be set: hinges, posts, and catch brought back into true, then tested until the latch clicks home every time.
Boulder City gates take a beating. The desert swings hard between hot afternoons and cold nights, and that constant expansion and contraction works on hinge plates and post anchors year after year. A gate that hung perfectly when it was set can drop a half inch at the far post after a few seasons. That is usually all it takes to make a good gate feel broken. Most of the time it is not the gate itself. It is alignment. Our technicians bring up to 13 years of experience to every realignment, and we settle an upfront price before a single bolt is turned, so a square deal is waiting on the bill. Call (888) 276-7609 and a live person answers, day or night.
When You Need Gate Realignment
Realignment is the right call when the gate still has good bones but no longer shuts clean. Here are the signs we see most in Boulder City, each one a reason to have the gate looked at before the problem grows:
- The gate drags or scrapes the ground. A gate that starts catching on the driveway slab has usually dropped at one hinge or settled at the post. Left alone, the scraping wears the bottom rail and stresses the opener motor on every cycle.
- The latch won’t catch without a lift or a shove. If you have to lift the gate with your hip to get the latch to grab, the gate has twisted or dropped out of square. On a LiftMaster or Elite operator, that misalignment forces the motor to fight the gate, which shortens its life.
- The gate has an uneven gap along the top or side. A widening gap at one corner tells you the gate is out of plumb. This is common on older homes around the Historic District, where original ironwork hangs on posts that have shifted with the desert soil.
- The gate swings open or won’t stay closed on its own. A gate that drifts is a gate whose hinges and posts are no longer lined up. That drift can trip a safety sensor or leave the gate resting against the strike post instead of seating in it.
- You hear a groan or a clunk on every cycle. Noise at the hinge point often means a binding hinge or a post that has leaned. Realignment takes the strain off before it cracks a weld or burns out a DoorKing or Mighty Mule control board.
- The gate was bumped by a vehicle or a wind gust. Even a slow nudge in the driveway can knock a heavy gate out of alignment. If the gate moved and never quite came back, it needs to be rehung and squared.
Our Gate Realignment Process
We treat realignment as a set of measured steps, not guesswork. Here is how the job runs from the driveway to the final test:
- Inspect the whole gate. We check the hinges, posts, frame, welds, and the opener itself. A sagging gate is sometimes a hinge problem and sometimes a post problem, and telling the two apart is what keeps the fix from coming back.
- Measure and diagnose the cause. We measure the gate for square and plumb against the posts. That is how we find whether a hinge plate has wallowed out, a post anchor has loosened, or the frame has twisted from heat and weight.
- Settle the price first. You get an upfront price before any work starts. No surprises on the bill, no added charges after the fact. Our $50 Off Any Repair Over $250 offer applies here, and seniors and veterans always get 5% off.
- Adjust or reset the hardware. We tighten and shim the hinges, reset the post anchors or hinge plates, and true up the frame. On heavier gates we may weld a reinforcement plate at a stressed corner so the alignment holds through the seasons.
- Re-hang and square the gate. The gate gets rehung and checked so it swings free with a light hand, sits level at the latch, and clears the ground at the right height.
- Test the opener and safety sensors. We run the gate through full open and close cycles, confirm the latch catches cleanly, and check the safety sensors and operator limits. If the motor was fighting the gate, we retune it so it runs easy.
Most realignments are done in one visit. When a bent frame or a failed hinge turns up mid-job, we tell you what we found and what it will take before we go further. Our technicians are background-checked and uniformed, and they work in your gate the way they would work in their own mother’s. Every completed realignment carries the 90-Day Done Right Promise, a written guarantee with no hassle and no arguing. If it is not right, we come back and make it right.
Gate Realignment Pricing in Boulder City
Gate realignment in Boulder City typically runs $150 to $400 depending on the gate’s weight, the number of hinges involved, and whether a post needs resetting. Here is how the line items usually break down:
- Hinge adjustment and tightening: $150 – $225. The most common realignment, suited to a gate that has slipped slightly at the hinge.
- Hinge plate reset or replacement: $200 – $300. Needed when the hinge has wallowed out in the post or frame.
- Post reset or anchor repair: $250 – $400. For a gate out of square because the post has leaned or loosened in the soil.
- Frame truing and weld reinforcement: $200 – $350. For a twisted or stressed frame that needs a plate welded in to hold alignment.
- Opener and sensor retune after realignment: $89 – $150. Often folded into the visit so the operator runs clean on the newly squared gate.
What moves the price is the gate’s size and material, how many points are out of alignment, and whether the fix is an adjustment or a reset. A light single-leaf pedestrian gate is on the low end. A wide double-swing iron gate with a DoorKing operator and two posts to true up lands higher. We give a free estimate before we touch the gate, and we honor our Free Second Opinion on Any Written Estimate if you already have a quote in hand. Our $89 Seasonal Tune-Up is a good way to keep alignment true before the summer heat and winter cold do their work. Call (888) 276-7609 for an exact quote on your gate.
FAQs – Gate Realignment
How much does gate realignment cost in Boulder City?
Gate realignment in Boulder City usually costs $150 to $400. Simple hinge adjustments sit at the low end, while post resets and frame truing push toward the top. A free estimate settles the figure before any work begins. Call (888) 276-7609 and we will give you a straight answer today.
Can a sagging gate be realigned, or does it need replacing?
A sagging gate can almost always be realigned instead of replaced, as long as the frame and welds are sound. Realignment is far cheaper than a new gate and keeps the ironwork you already have. If a hinge, post, or weld has failed, we repair that part and bring the gate back true. Call us for a free estimate and we will tell you plainly whether repair or replacement is the better square deal.
Do you work on gate openers when you realign a gate?
Yes. We realign the gate and then check the operator so the motor runs on a squared gate rather than fighting a crooked one. We are trained and equipped on nine gate-automation brands, including LiftMaster, DoorKing, and Elite, so the correct fix is made on the first visit. Call (888) 276-7609 to book a realignment and operator check together.
How fast can you come out to realign my gate in Boulder City?
Most realignments are completed in a single visit, and we answer the phone around the clock to schedule you. Because a live person picks up 24 hours a day, you are never stuck in a voicemail tree. Call (888) 276-7609 and we will get your gate squared and closing right.
If your gate is dragging, drifting, or refusing to latch, the fix is usually a realignment rather than a replacement. We have proudly served local communities for over 42 years, and our standing offers are there for you: $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, and a permanent 5% Senior and Veteran discount, all backed by the 90-Day Done Right Promise in writing. Call (888) 276-7609 for a free estimate and a gate that closes like the day it was hung.
Written by the team at Ironworks Gate Co. Boulder City, serving Boulder City.