A Ironworks company - serving Boulder City, NV

DoorKing Keypad & Intercom Repair in Boulder City, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

DoorKing Keypad & Intercom Repair: The Boulder City Owner’s Guide

DoorKing keypad and intercom repair in Boulder City usually runs $185 to $425 installed, depending on whether we’re replacing a keypad board, an intercom handset, or the whole entry unit, and most of that work is same-day when you call before noon. We’re an independent service company, not affiliated with DoorKing, and we service their keypad and intercom units every week in this town. You’ll usually know it’s failed when the gate stops answering a code that worked fine last month. Sometimes the keypad lights up but the gate doesn’t move. Sometimes the intercom crackles and the visitor can’t hear you. Owners in Boulder City tend to notice it on a quiet afternoon when a delivery driver sits at the call box for a minute too long.

Call (888) 276-7609

Which DoorKing Models This Applies To

DoorKing has built keypads and intercoms across several generations, and the part that fits one does not fit the next. The 1500 series and the 1510 keypads share a footprint but not the same wiring harness. The 1800 series intercom looks nearly identical to the 1810 from the outside, and the only reliable way to tell them apart is the model label inside the faceplate or on the back of the housing. Pull the cover, read the tag, write down the series and the serial. If the label is faded or missing, measure the recess and the mounting holes, and note whether the unit has a camera, a separate speaker, or a handset. We’ll match from that. On the OEM versus aftermarket question, DoorKing-branded boards are the surest fit for older series where the connector layout changed; quality aftermarket keypads are a reasonable choice for the more common 1500 and 1800 units, and we’ll tell you plainly which way we’d go on yours.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your DoorKing Keypad & Intercom Repair Is Failing

  • Codes that used to work now don’t. Often the keypad membrane has worn through at the most-pressed digits, or the controller board’s memory has scrambled after a power surge. In Boulder City, summer voltage sags and monsoon-season lightning strikes are the two most common culprits we see.
  • Keypad lights up but the gate won’t move. The keypad is communicating, but the signal isn’t reaching the operator. That’s typically a failed relay on the entry board or a broken wire in the run between the pedestal and the gate motor.
  • Intercom crackles, cuts out, or one side can’t hear the other. The speaker or microphone element has aged, or moisture has worked into the housing. Desert heat and dust dry out the seals faster than most owners expect.
  • Gate opens on its own or the keypad beeps randomly. Water or dust in the keypad, a failing board, or a crossed wire in the low-voltage run. This one is worth a call right away – a gate that opens on its own is a security problem, not just a nuisance.
  • Visitor call button does nothing. Usually a dead intercom power supply or a tripped breaker feeding the unit. Sometimes it’s as simple as a corroded terminal; sometimes the whole unit has reached the end of its life.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Most DoorKing keypad and intercom repairs in Boulder City fall between $185 and $425 installed. A membrane-only replacement or a simple wiring repair sits at the low end. A full keypad board swap on a 1500 or 1800 series unit runs in the middle. A full intercom or entry-unit replacement with new mounting pushes toward the top of the range. What drives the price is the part itself, whether the low-voltage wiring needs re-pulling, and whether the unit is post-mounted at the street or flush-mounted in a wall. We quote the whole job before we touch anything – parts, labor, and tax – and that number is what you pay. If the price moves, it only moves because you approved it first. The work is backed by our written 90-Day Done Right Promise. Current standing offer: $50 off any repair over $250.

DIY or Call Us?

There’s a short list of things an owner can safely check. Confirm the breaker feeding the keypad or intercom hasn’t tripped. Look at the low-voltage wires at the pedestal for visible corrosion or rodent damage. Make sure the code hasn’t simply been forgotten. Beyond that, this is low-voltage control wiring tied to a moving gate, and getting it wrong can leave the gate in an unsafe state or damage the operator’s control board. We’re not going to talk you out of checking the breaker, and we’re not going to walk you through rewiring a DoorKing entry unit over the phone. Our technicians have up to 13 years of experience on this equipment, and we service DoorKing alongside LiftMaster, Mighty Mule, and Ghost Controls. Call (888) 276-7609 and we’ll get eyes on it.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Ironworks Gate Co. Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch