A Ironworks company - serving Boulder City, NV

Ghost Controls Gate Motor Replacement in Boulder City, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Motor Replacement: The Boulder City Owner’s Guide

We replace Ghost Controls gate motors for Boulder City homeowners at a typical installed price of $520 to $890, with most single-motor swaps completed in a single visit. Your arm, control board, or operator housing is what fails, and the replacement gets mounted, wired, and cycle-tested before we leave. Owners usually find out the hard way: the gate opens halfway and stalls, the arm grinds instead of humming, or the keypad light comes on but nothing moves. On the older single-family drives off Nevada Way and around Wilbur Square, we see plenty of Ghost Controls units that were installed a decade ago and are finally asking for new hardware. When a gate stops mid-cycle in Boulder City, it’s rarely the remote – it’s the motor assembly underneath.

Call (888) 276-7609

Which Ghost Controls Models This Applies To

Ghost Controls builds primarily in two families: the AXS series (AXS1, AXS2, AXS3, AXS5, AXS10) for single swing gates, and the DTP/DTM dual-gate controllers for two-leaf driveways. Replacement arms and boards are not interchangeable between these lines. The model plate is usually on the underside of the operator housing or inside the control box; the first two letters tell you the series and the arm length is stamped alongside. Measure the arm pin-to-pin before you order anything, because a short arm swapped onto a long gate will overload the gearbox and burn the motor out in months.

On the OEM-versus-aftermarket question: Ghost Controls replacement arms and control boards are sold as factory parts, and the quality aftermarket equivalents we’ve handled in the field are sound when the spec matches, but only when it matches. If your unit is out of production and the factory part isn’t available, we will tell you so directly rather than fit something that “should” work. We are an independent service provider for Boulder City – not affiliated with Ghost Controls – which means we match the correct part to your specific model, not the closest thing on a shelf. The right fitment call on a Boulder City gate saves you a second visit.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Gate Motor Replacement Is Failing

These five symptoms show up again and again on Ghost Controls units in Boulder City:

  • Gate stalls halfway through a cycle. Usually a worn motor brush or a failing control board, not a battery in the remote. If it stalls at the same point every time, the operator is the culprit.
  • Arm grinds or clicks instead of a smooth hum. The gearbox or arm bearing has gone. The motor still runs, but the mechanical output is shot and it will chew through the arm before long.
  • Gate closes on its own or reverses for no reason. Control board or limit-switch fault. Common in summer heat when the board’s temperature protection kicks in and then sticks.
  • Keypad or wall button triggers nothing. Board failure or a dead low-voltage transformer. We test both before pronouncing the motor dead, because sometimes it’s just the transformer.
  • Motor runs hot to the touch, or trips a breaker. Winding failure or a shorted armature. Stop using the gate until it’s diagnosed – a failed winding can do real damage to the housing.

Replacement Cost & What’s Included

Installed Ghost Controls gate motor replacement in Boulder City runs from about $520 to $890 for a single-leaf swing gate. The range is driven by the model, whether the arm, board, or complete operator is being replaced, gate weight and travel, and whether the power run needs work. Dual gates cost more because there are two motors and two sets of limits.

Every quote breaks out the part, the labor, and any electrical or mounting correction so you can see exactly what you’re paying for. The price is quoted and agreed before any work starts – no surprises on the bill. Our 90-Day Done Right Promise covers the installation in writing: if it isn’t right, we come back and make it right, no arguing. Most jobs are completed in a single visit by a background-checked technician who carries the K.E.Y.S. discipline onto every driveway in Boulder City.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely clear the gate’s travel path, confirm the circuit breaker, test the battery in the remote, and photograph the model plate. That’s where we’d draw the line. Gate motor replacement involves 120-volt wiring, moving hardware under load, and the control board’s programming – all of it dangerous if you’re not trained, and none of it worth an injury. A swapped arm on a live spring system or a miswired board is how people get hurt, and it’s why we recommend a trained technician every time.

We’ve walked Boulder City owners through dozens of these. When you’re ready, call (888) 276-7609 – a live person answers around the clock, and our free second opinion on any written estimate is standing.

Frequently Asked Questions

Call Ironworks Gate Co. Boulder City

If your Ghost Controls gate is stalling, grinding, or simply done, call Ironworks Gate Co. Boulder City at (888) 276-7609 for a free estimate. We’ll match the correct replacement to your model, quote the full installed price up front, and stand behind the work in writing with our 90-Day Done Right Promise. Active offers include $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, our $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. A live person answers around the clock, ready to help you get the gate moving again.

Written by the team at Ironworks Gate Co. Boulder City, serving Boulder City and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Ironworks Gate Co. Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch