Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Motor & Opener in Boulder City: What to Know First
We repair, replace, and service Mighty Mule gate motors and openers throughout Boulder City, and most jobs involve a single visit once the correct part is on hand. Typical repairs run $210 to $480 depending on the series and what failed; full operator replacements land higher, and we quote and agree the price before any work starts. As an independent Mighty Mule service provider, we’re not affiliated with or authorized by the manufacturer, but our technicians are trained on the brand and the parts.
This page is for the homeowner with a Mighty Mule gate on the driveway and something wrong with it. Call (888) 276-7609 and a live person will answer, day or night.
How Mighty Mule Products Fail – and How We Fix Them
Mighty Mule builds a solid, accessible operator, and the failures we see repeatedly in Boulder City trace to the brand’s own design choices rather than abuse. Here’s what actually breaks on the brand, and what our technicians do about it.
- Mighty Mule 350 and 360 swing operators: control board failures after monsoon-season surges. The single-board design on these older swing models is vulnerable to a close lightning strike on the neighborhood grid, and the board cooks before the surge strip has a chance to do anything. We test the board in place, confirm the failure with a meter, and swap it rather than selling a whole new operator when the motor and gearbox are sound.
- Mighty Mule MM571 and MM572: battery and solar-charging cuts at the first hard freeze. These rely on a charged 12V battery to move the gate, and when the panel gets shaded or the battery ages out, the gate goes dead in cold weather first. We check battery voltage, charging output, and panel angle instead of replacing the battery every autumn.
- Mighty Mule 500 and 502: stripped gear in the actuator arm. The plastic and light-metal gear sets wear faster on heavy or dragging gates, and you’ll hear it grinding before it fails entirely. We replace the actuator rather than the whole unit, and we fix the gate drag that caused it, which is where the real wear started.
- Mighty Mule MMS100 and slide operators: track and limit-switch drift. A slide gate needs a clean, level track, and when the track shifts on a Boulder City pad that’s settled, the limits drift and the gate stops short or keeps running into the stop. We reset the limits, adjust the track, and re-verify the safety edges on every visit.
- The openers themselves on older Mighty Mule installs: the “beep but no move” fault. That symptom is almost always a keypad or intercom signal reaching a board that’s no longer recognizing the command, not a dead motor. We trace the access-control side before condemning the operator, which saves the cost of a motor you didn’t need.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Mighty Mule Gate Motor & Opener Process
Every Mighty Mule job follows the same path from your call to a clean driveway.
- 1
Call and diagnose. You describe what the gate is doing, we ask the right questions, and we book a visit. Live person, every time.
- 2
On-site inspection. We test the board, motor, battery, limits, and charging system, and check the gate itself for drag, sag, or a track that’s moved. A motor that fails twice usually has a gate problem underneath it.
- 3
Parts decision, explained. We tell you plainly where an OEM Mighty Mule part is the right call and where a quality aftermarket equivalent is a better value, and we never use a part that voids a warranty you still have.
- 4
Upfront price. You get a written price before we touch a bolt, and that’s the number on the bill.
- 5
The repair, done right. Single visit in most cases, with the gate tested open and closed, safety edges checked, and the site cleaned before we leave.
- 6
The 90-Day Done Right Promise. Written, no arguing. If it’s not right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Mighty Mule Gate Motor & Opener Costs in Boulder City
Prices below are typical for Mighty Mule work in Boulder City. Every quote is free, and the price is agreed before work starts.
| Job | Typical range |
|---|---|
| Diagnostic visit (credited toward the repair) | $89 |
| Control board replacement (350, 360) | $280 – $420 |
| Battery and solar-charging repair (MM571, MM572) | $210 – $340 |
| Actuator arm replacement (500, 502) | $320 – $480 |
| Slide operator tune-up and limit reset (MMS100) | $180 – $290 |
| Full Mighty Mule operator replacement | $850 – $1,600 |
What moves the number: series and part, whether the gate itself needs adjustment, and access to the operator. Call (888) 276-7609 for a free estimate and a firm price.
Why Boulder City Homeowners Call Ironworks Gate Co. Boulder City for Mighty Mule Work
We’ve spent more than four decades working on gates in this town, and we’ve watched enough Mighty Mule installs to know their habits. A live person answers the phone 24 hours a day, every day, and our technicians are background-checked and uniformed on every job. We’re trained on nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so whatever’s on your driveway, we already know it. Most jobs finish in one visit, and every one is covered by the 90-Day Done Right Promise in writing. We handle the whole scope, from a Mighty Mule repair to a keypad, intercom, or a fresh install.
FAQs
No, when the work is done correctly with the right parts. We check your warranty status first and use OEM Mighty Mule parts where it matters, so the coverage stays intact. Call (888) 276-7609 and we’ll confirm before we start.
Yes. We stock and source Mighty Mule parts for the common swing and slide series and order specialty parts as needed, so most jobs still finish in a single visit. Call for an exact quote on the part and the labor.
Repair when the motor, gearbox, or board is sound and the failure is a single part; replace when the unit is showing multiple failures at once or the gate itself is the underlying problem. We’ll tell you honestly which is the better spend. Estimates are free.
We answer the phone around the clock and schedule most repair visits quickly, with same-day availability for emergencies. Call (888) 276-7609 and we’ll confirm a time.
Yes, we’re trained on LiftMaster, Ghost Controls, DoorKing, and six other major brands, so if you’re weighing a switch, we can advise on the right operator for your gate. Call for a free second opinion on any written estimate.
Written by the team at Ironworks Gate Co. Boulder City, serving Boulder City and nearby areas.
Ironworks Gate Co. Boulder City – call (888) 276-7609 for a free estimate. A live person answers 24 hours a day.