A Ironworks company - serving Boulder City, NV

LiftMaster Gate Motor Replacement in Boulder City, NV

LiftMaster operatorsLiftMaster operators
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

LiftMaster Gate Motor Replacement: The Boulder City Owner’s Guide

LiftMaster gate motor replacement typically runs $650 to $1,200 installed, depending on which operator you have and whether the arm, control board or entire unit is being swapped. We handle these swaps in Boulder City with same-day availability on most models. Owners usually find out the motor is done the same way: the gate opens halfway and stalls, the arm cycles but the gate doesn’t move, or the operator hums for a second and trips the breaker. Boulder City’s desert heat and dust work on these units year after year, and the motor is often the last part to give out after the board, the limit switches and the battery have already been replaced once.

Call (888) 276-7609

Which LiftMaster Models This Applies To

LiftMaster swing and slide operators are the most common gate motors we see on Boulder City driveways. The residential swing line includes the LA400, LA412, CSL24U and RSL12U; the slide line includes the CSL24U and older SL3000-series units; and heavier estate gates often run the Elite-series operators. The model plate is usually inside the control box cover, stamped on a silver label with the model number and serial. Take a photo before you call us. If the label is faded, the arm length, the control box dimensions and the number of DIP switches on the board are what we use to match the correct replacement.

On OEM versus aftermarket for LiftMaster specifically: the OEM control board and motor are the correct fit, and we recommend them for units under 10 years old. For older operators where the OEM part has been discontinued, quality aftermarket equivalents from LiftMaster-approved suppliers are the practical option. We source both, quote both, and tell you honestly which one fits your gate. Ironworks Gate Co. Boulder City is an independent service provider and is not affiliated with LiftMaster.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your LiftMaster Gate Motor Replacement Is Failing

These are the symptoms that tell us the motor itself is the problem, not the board, the battery or the arm:

  • Gate stalls partway through the cycle. The motor loses torque as the brushes wear, so it opens fine cold and bogs down once it warms up. This is the most common pattern we see in Boulder City in July and August.
  • Operator hums but the gate doesn’t move. The motor is receiving power but the gearbox or drive coupling has stripped. It’s a motor-plus-gearbox replacement, not a motor alone.
  • Breaker trips when the gate runs. A shorted motor winding or a failed capacitor draws too much current. Do not keep resetting the breaker. Shut the operator off at the disconnect and call us.
  • Gate reverses immediately on close. Sometimes the safety edge, sometimes the motor stalling against the load. We test the motor current draw to separate the two before quoting.
  • Grinding or clicking from the operator housing. Worn motor bearings or a failing gearbox. Left alone, it takes out the control board next, and the repair gets more expensive.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed LiftMaster gate motor replacement in Boulder City runs $650 to $1,200 for most residential operators. The range is driven by which model you have, whether the control board and battery need to be replaced at the same time, and whether the gate itself needs hinge or track work to run cleanly on the new motor. Every price is quoted and agreed before we start, and the quote is itemized: motor, labor and any related parts.

Item Typical Installed Range
Motor only (existing board and arm reused) $650 – $850
Motor plus control board $850 – $1,050
Motor, board and battery backup $950 – $1,200
Worn hinge, roller or track correction (if needed) Quoted separately

Every replacement is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right.

DIY or Call Us?

You can safely check a few things yourself. Confirm the operator has power, look at the battery backup indicator, check that nothing is blocking the safety edges, and look at the model plate so you know what you’re dealing with. That’s where it stops being a good idea. Gate operators run on 120V line power with a charged capacitor that holds current after the breaker is off, and the arm is under spring tension on most swing models. Getting it wrong means shock, a dropped gate, or a new board on top of the motor you were trying to replace. We do this work every week on Boulder City gates. Call (888) 276-7609 and we’ll quote it upfront before anything is touched.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Ironworks Gate Co. Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch