Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Boulder City Homeowners Choose Ghost Controls Gate Repair
Ironworks Gate Co. Boulder City provides independent Ghost Controls gate repair, service and installation for homeowners across Boulder City, NV. Most Ghost Controls units in this town were homeowner-installed, so we start from the controller’s actual behavior – solar charging, battery voltage under load, and arm geometry – rather than from the manual. We’re not affiliated with, authorized by or endorsed by Ghost Controls; we’re an independent service provider that works on their equipment every week.
That independence matters here. A Ghost Controls HD or AXL opener on a Boulder City driveway has usually seen a desert summer or two before it starts acting stubborn, and the fix is rarely the one the homeowner expected. Call (888) 276-7609 and a live person answers. Not a voicemail, not a callback queue.
Why Trust Ironworks Gate Co. Boulder City for Your Ghost Controls Gate Repair?
Our technicians have up to 13 years of experience, and they’ve spent a good share of it inside Ghost Controls control boxes. The brand builds for the do-it-yourselfer: simplified controllers, plug-in accessory ports, solar-ready wiring. That design is friendly on installation day and less friendly five years later, when a homeowner can’t tell whether the gate is slow because the battery aged out or because the arm bracket walked loose off the post. We test both before we touch either.
Where an OEM-compatible board, arm, battery or remote is the right match, that’s what goes on. We don’t cut corners on the parts that talk to the controller. And because we service nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule – we’re not guessing at Ghost Controls behavior in isolation. We know what a healthy opener of any make sounds like at the half-travel point.
Warranty-safe work is part of the deal. We document what failed and why, keep the original access-control wiring intact wherever it’s sound, and don’t swap in a mismatched board that would void a manufacturer’s coverage. Every completed job carries our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Boulder City
Ghost Controls failures tend to cluster. These are the ones we see most often on Boulder City driveways:
- Control-board damage after a lightning strike or monsoon surge. Boulder City sits in the Mojave and gets summer storms with hard lightning. A nearby strike can leave a Ghost Controls board clicking but never latching, or cycling the gate on its own with no command given. The arm goes dead or the unit runs unattended. Board replacement is usually the honest answer, and we’ll test the arm and limits afterward so a fresh board doesn’t just fail again.
- Battery and solar charging failures. This is the single most misdiagnosed Ghost Controls problem. The gate slows down or quits mid-travel once a solar panel is shaded or the battery ages, and the homeowner assumes the motor is dying. Usually it isn’t. The panel isn’t keeping up, or the battery won’t hold a charge under load in the heat. We measure charging voltage and load voltage before condemning anything.
- Mounting and geometry from homeowner installs. On a lot of HD and TSS1 kits, the arm bracket on the post has shifted or loosened since installation day. The gate binds halfway through travel, and the opener strains or reverses against the bind. New hardware and a corrected mount angle solve it. A new motor wouldn’t.
- Limit and sensitivity settings drifting out of adjustment. Desert heat moves steel and wood, and a driveway that was level in spring may sit a touch out of level by August. The gate reverses off the stop or refuses to close fully. Travel limits and force sensitivity need resetting to the actual gate, not the factory default.
- Remote and keypad pairing dropouts. Accessories on Ghost Controls systems sometimes lose their pairing after a board swap or a battery disconnect. The remote may work while the keypad goes dead, or vice versa. We re-pair and verify every entry point, not just the one the homeowner called about.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Ghost Controls replacement boards, arms, batteries and remotes are the right call when they’re the correct match for the unit. We use them there. For hinges, stops, keypads and wiring, quality aftermarket hardware often does the job at lower cost without any downside – so that’s what we quote. We don’t keep inventory on hand; parts are sourced per job to fit the specific opener on your gate.
The repair-versus-replace call is where some companies get creative. Here’s how we make it. A solar-friendly Ghost Controls opener on a sound arm and a solid post is almost always worth repairing. A bent arm sitting on a failing board with a corroded frame is the case where we’ll sit down and talk honestly about replacement – and we’ll tell you why, in plain terms, before you decide. The price is quoted and agreed before any work starts, so there’s no surprise on the bill. Call (888) 276-7609 for a free second opinion on any written estimate.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We test battery and charging voltage under load, watch the arm through a full open-and-close cycle, check the post mount and hinge line, then read the controller’s behavior against the symptom you described. Most Ghost Controls problems reveal themselves in that first pass.
- 2
Repair or install. Once we know what failed, we quote the fix and the parts in writing and get your agreement before we start. Board swaps, arm replacement, battery and solar service, realignment and limit setting all happen in this step.
- 3
Test. We cycle the gate through full travel several times, verify the safety reverse and force sensitivity against the real gate, and confirm every remote and keypad works. No hand-off until the gate closes on its own and stays closed.
- 4
Warranty. You get our written 90-Day Done Right Promise, the Keystone Standard, on the completed job. If something we touched isn’t right, we come back and fix it.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Boulder City
We service and install the full Ghost Controls lineup homeowners actually own. That includes the Heavy-Duty Series (HD) single-swing opener kits, the Architectural Series (AXL) swing openers, the Premium Series (TSS1) single-swing kits, and the solar and battery-backup accessory kits that go with them. Battery backup, motor repair and gate realignment are the three jobs we handle most often on these units. If you’re not sure which series is on your post, we’ll identify it from the controller and the arm during the visit.
We Also Service These Brands
Ghost Controls is one of nine brands our technicians are trained and equipped on. We also service LiftMaster, Mighty Mule and DoorKing, along with FAAC, BFT, Linear, Viking and Elite. That range matters on a mixed-property street where one gate carries a Ghost Controls kit and the driveway next door runs a LiftMaster – we handle both, on the same call if needed.
FAQs – Ghost Controls Gate Repair Service in Boulder City
No. We’re an independent service provider. We’re not affiliated with, authorized by or endorsed by Ghost Controls. We work on their equipment because we’ve built the familiarity to do it well, and we say so plainly rather than implying a manufacturer relationship we don’t have.
Yes, where the OEM part is the correct match. Replacement boards, arms, batteries and remotes for a Ghost Controls unit get genuine or OEM-compatible parts because those are what talk to the controller correctly. For hinges, stops, keypads and wiring, we use quality aftermarket hardware when it saves you money without costing quality. Call (888) 276-7609 for an exact quote on the parts your gate needs.
Most Ghost Controls repairs are completed in a single visit. A board swap or battery and solar service typically runs well under two hours once we’re on site; a realignment that involves re-setting the post bracket can take longer. We give you a realistic window when we quote the job, and we show up when we say we will. Call (888) 276-7609 to schedule.
We cover the Heavy-Duty Series (HD) single-swing kits, the Architectural Series (AXL) swing openers, the Premium Series (TSS1) single-swing kits, and the solar and battery-backup accessory kits for all of them. Battery backup, motor repair and gate realignment are our most common jobs on these lines. Call (888) 276-7609 if you’re unsure which series you have.
Our work is warranty-safe when it should be. We use the correct OEM-compatible board and parts, we document what failed, and we don’t swap in a mismatched controller that would give a manufacturer grounds to deny coverage. If your unit is still under a manufacturer warranty, tell us when you call and we’ll factor that into the repair plan.
Most Ghost Controls repairs fall between $180 and $420 depending on the part and the fault. Board replacement runs higher than a battery or solar service, and a realignment on a sound arm is typically on the lower end. The price is quoted and agreed before any work starts, and our $50 Off Any Repair Over $250 offer applies. Call (888) 276-7609 for an exact quote.
Almost certainly not. That pattern is the classic battery-and-solar signature in desert heat. The panel charges less, the battery holds less under load, and by afternoon the unit can’t keep up. We test charging voltage and battery voltage under load before we touch the motor. Call (888) 276-7609 and we’ll sort the real cause out.
Often it can be repaired. A surge usually damages the control board rather than the arm or motor, so a board replacement brings most struck units back to life. We test the arm, limits and accessories afterward to confirm the fix holds. Call (888) 276-7609 for an assessment.
Either the limit and sensitivity settings have drifted out of adjustment, or the gate is binding halfway because the arm bracket or hinge has loosened. It’s one of those two causes nearly every time. We check geometry first, then reset travel limits and force sensitivity to the actual gate. Call (888) 276-7609 to book a visit.
No. Homeowner-installed wiring is common with this brand, and we troubleshoot from the controller’s behavior rather than from an assumed factory wiring standard. We’ll tidy anything unsafe and leave the rest alone if it’s working correctly.
The keypad has usually lost its pairing after a board swap or a battery disconnect, or its own battery has aged out. We re-pair and verify every entry point so you’re not back on the phone next week. Call (888) 276-7609 and we’ll take care of it.
Book Your Ghost Controls Service in Boulder City, NV
If your Ghost Controls gate is slow, reversing, dead after a storm or simply due for a tune-up, call Ironworks Gate Co. Boulder City at (888) 276-7609. A live person answers 24 hours a day, 7 days a week. Estimates are free, pricing is upfront and settled before work begins, and every job is backed in writing by our 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co.