A Ironworks company - serving Boulder City, NV
Ironworks Gate Co. Boulder City gate repair team

Gate Repair Cost in Boulder City - Real Local Prices, Then a Free Site Survey

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Repair Cost in Boulder City?

Gate repair in Boulder City typically runs $185 to $650 for most residential driveway and estate gates, with a single broken hinge or a keypad that won’t accept a code at the low end and a full opener or motor replacement at the high end. The final number depends on what failed, the weight and swing of the gate leaf, and whether the automation needs parts we have to order. We give you the price in writing before we touch a bolt, and free estimates are always available.

Our technicians have up to 13 years of experience, and we’re trained on the nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Boulder City, because the gates we see here are a mix of heavy custom iron and older systems installed decades ago, and the right diagnosis saves you money on the first visit.

Key Takeaways

  • Most gate repairs in Boulder City land between $185 and $650; motor and opener replacements climb higher.
  • Diagnostic visits usually run $75 to $150, and we credit that toward the repair.
  • The desert heat, wind-blown grit, and the intense summer sun here wear hinges, sensors, and control boards faster than in cooler climates.
  • We settle on an upfront price before work starts, and every job carries the 90-Day Done Right Promise in writing.
  • A live person answers the phone, day or night.

Gate Repair Cost Breakdown (2026)

Here’s what the common jobs actually cost in Boulder City this year. These are real ranges, not teaser numbers, and they reflect what homeowners here have paid for comparable work.

Repair Type Typical Price Range
Service call and diagnostic $75 – $150
Hinge replacement (each) $95 – $180
Roller or wheel replacement (per gate) $120 – $250
Latch, striker, or lock repair $110 – $240
Gate alignment or sag correction $225 – $480
Welding repair on iron or steel frame $185 – $425
Safety sensor or photo-eye replacement $160 – $310
Control board replacement $275 – $550
Keypad or access control repair $180 – $420
Gate opener or motor replacement $650 – $1,850 (parts and labor)
Battery backup install $240 – $460
Full track or rail rebuild $480 – $1,200

What pushes a bill toward the top of a range? Heavy custom iron gates take more labor to reposition and weld than lighter aluminum. If the motor is a brand with limited parts availability, the replacement cost climbs. And if a gate has been failing for a while, the damage compounds: a sagging leaf that’s been dragging for months wears the opener motor too, and now you’re paying for two repairs instead of one. On the flip side, jobs go faster and cost less when we can see the gate and the opener’s model plate in advance, which is why we ask a couple of questions on the phone.

Every repair we finish carries the 90-Day Done Right Promise. If it isn’t right, we come back and make it right, no arguing and no paperwork. That’s the Keystone Standard, and it applies whether you’re paying $185 for a hinge or $1,850 for a new opener.

What Affects Gate Repair Pricing in Boulder City

  • Desert heat and sun. Summer temperatures here push past 105°F regularly, and that heat cooks control boards and battery backup units faster than cooler regions. When a control board fails on a ten-year-old LiftMaster or FAAC, it’s often the heat, and the repair cost is what the part costs.
  • Wind-blown grit and dust. The same wind that rolls through Boulder City carries sand into hinges, rollers, and tracks. We see premature wear on rollers and alignment failures far more here than in greener parts of the valley, and that wear shows up on your repair bill.
  • Gate weight and material. A heavy wrought-iron estate gate needs more labor to align, weld, and hang than a light aluminum gate. The bigger and heavier the leaf, the longer every adjustment takes.
  • Automation brand. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most homeowner systems are ones we handle natively. When a part has to be ordered for an unusual brand, expect a slightly higher line item and a second visit.
  • Age of the system and prior repairs. A gate that’s had three quick patch jobs by a handyman who didn’t address the root cause will cost more to set straight than one that’s been serviced properly. We diagnose the failure, not just the symptom.
  • How long the problem has gone on. A sensor that’s been flickering for six months may have taken a motor and a control board with it. A sensor replaced promptly stays a small bill.

Homeowners here tend to stay in their homes for decades, and we treat that as a good thing. The goal on a Boulder City gate isn’t to get it limping along another six weeks. It’s to make a 40-year-old gate close like the day it was hung, so you don’t think about it again. That’s the kind of repair we’d want done on our own mother’s gate, and it’s how our background-checked technicians work.

How to Save on Gate Repair

A few practical moves keep the bill down without cutting corners on the fix.

  • Get the safety sensors checked before they become a motor problem. Photo-eyes and safety sensors are the cheapest common repair we do. When they fail, they usually stop the gate, and homeowners sometimes force the gate through or bypass the sensor to get in and out. That’s how a $200 sensor job turns into a $900 opener job, so call it in early. (Note: safety sensors keep the gate from closing on a person or vehicle, so please don’t bypass them. That’s a job for a trained technician.)
  • Ask about the free second opinion on a written estimate. If another company has quoted you a repair, we’ll read it and tell you honestly what’s necessary and what isn’t. A lot of “needs a whole new opener” diagnoses turn out to be a control board or a sensor.
  • Use the seasonal tune-up. An $89 Seasonal Tune-Up adjusts hinges, lubricates the moving parts, checks the opener, and tests the safety reverse. Lubrication is a real cost saver here because Boulder City grit wears hinges and rollers fast without it.
  • Take the standing offers. There’s $50 off any repair over $250 and a permanent 5% Senior and Veteran discount. These stack onto the same job.
  • Don’t delay a weld. A cracked weld on a gate frame flexes the leaf every time it swings, and that wear spreads. Welding it while it’s small is a fraction of the cost of re-hanging the gate.

We don’t pressure anyone. Free estimates are free, whether you book the job or not. Call (888) 276-7609 and a live person will pick up.

Can You Fix My Gate in a Single Visit?

Most gate repairs in Boulder City are done in one visit, usually within 1 to 3 hours on site, because our technicians are trained across all nine major opener brands and carry the parts for the common failures. Hinge, roller, sensor, and latch jobs almost always finish the same day. Opener replacements on common brands often do too. The exceptions are uncommon parts that have to be ordered, or heavy alignment work that needs a second pair of hands and a return trip.

We’ll tell you on the phone whether you’re looking at one visit or two. It’s a square deal: we tell you what the job needs and what it costs before anyone drives out. And if it isn’t right after we leave, the 90-Day Done Right Promise brings us back to make it right.

How We Handle a Repair, Step by Step

  1. You call, a person answers. A live person picks up, day or night. We ask about the gate, the brand of the opener, and what’s happening so we can bring the right parts and technicians.
  2. On-site diagnosis. We test the gate, the opener, the safety sensors, and the power at the control board. We check the tracks, hinges, and welds too, because a lot of “opener problems” are actually a sagging gate pulling on the motor.
  3. Upfront written price. You get the price in writing before any work starts. No surprises on the bill. If you have another estimate, we’ll look at it and tell you what we’d do.
  4. The repair. Our background-checked technicians finish the work and test every component, including the safety reverse, before they pack up.
  5. Written guarantee. Every job carries the 90-Day Done Right Promise. If it isn’t right, we come back. No arguing.

One safety note that matters more than anything else on this page: gate openers and their springs and counterweights run under real mechanical tension, and some gates are heavy enough to crush a person. Don’t attempt to adjust the opener, the tension springs, or the safety sensors yourself to save a few dollars. A trained technician with the right tools is the only safe way to do it.

FAQs – Gate Repair Cost in Boulder City

How much does gate repair cost in Boulder City?

Most residential gate repairs in Boulder City run $185 to $650. A single hinge, latch, or sensor job sits at the low end; a full opener or motor replacement runs $650 to $1,850 including parts and labor. Call (888) 276-7609 for an exact quote, and estimates are free.

Is it cheaper to repair a gate or replace it?

Repair is almost always cheaper than replacement for the gate leaf itself, often 40% to 60% less than a new gate. The one case where replacement wins is a badly rusted frame where the welds keep failing, and we’ll tell you honestly when that’s the situation. Call (888) 276-7609 and we’ll look at it before you commit to either.

Can you come today?

Same-day service is often possible, and we answer the phone 24 hours a day. Call (888) 276-7609 and we’ll tell you when we can have a technician at your gate, usually within the same day for most repairs.

How much does a new gate opener cost in Boulder City?

A gate opener or motor replacement in Boulder City typically runs $650 to $1,850 installed, depending on the brand and the weight of your gate. On the nine major brands we service, including LiftMaster, FAAC, Linear, and Viking, we usually have the part and can finish in one visit. Call (888) 276-7609 for an exact price.

Do you charge for estimates?

No. Estimates are free, and we’ll look at a written estimate from another company at no charge. Call (888) 276-7609 to set one up, and a live person will answer.

Why Homeowners Here Call Us

We’re the gate specialist for Boulder City, which means we don’t do everything: driveway and estate gate repair, gate installation, motors and openers, access control, and parts and welding. That focus is why we’re trained on the nine leading automation brands and why we carry the common failure parts. When you call, you get a live person, not a voicemail. When we quote, it’s upfront and settled before a bolt is turned. And when we finish, the job is backed in writing. It’s the company that makes a 40-year-old gate close like the day it was hung.

If you want the full picture of what we handle, start with our gate repair services home page, or dig into gate repair in Boulder City for the full scope of what we do. You can also explore driveway gate repair, gate motor repair, gate opener replacement, automatic gate service, swing gate repair, sliding gate repair, gate welding and fabrication, gate access control repair, keypad and entry system repair, LiftMaster gate repair, FAAC gate repair, and gate parts and hardware.

Ready to Get That Gate Fixed?

Call (888) 276-7609 for a free estimate on gate repair in Boulder City. A live person answers 24 hours a day, 7 days a week, and we’ll get a technician out to look at your gate, give you an upfront price, and get it working right. Done right, and backed in writing.

Written by the team at Ironworks Gate Co.

Pricing reflects the Boulder City market as of 2026. Ironworks Gate Co. Boulder City offers free estimates – call (888) 276-7609.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."

- Layla Haddad

"The repair is holding. He was quite a bit later than the window I was given and nobody called me about it, I had to call them. The work itself was done well once he arrived."

- Ruben Morales

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

- Veronica Ramirez
Need Gate Repair help in Boulder City? Licensed & insured · 1-hour response · free estimates
Call (888) 276-7609

Request a Free Estimate

Tell us what's going on in Boulder City. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch